BIG Discounts to Kickoff Our Sturgis Savings Weeks!

Hey folks, we’re really throwin’ out the rules for the next couple of weeks.  We have slashed prices in celebration of the 2011 Sturgis Rally!  Our specials this week and next will blow your mind.  You have to see it to believe it.


Left Side Drive Rigid Frame for Wide Tire Big Twin

250 mm Tire with Rear Chain.  1″ O.D. Rear Axle with flush mounted cover plates.  Welded-in Transmission Mounting Plate.  Rubber Mounted Oil Tank with center fill oil cap hole.  Fork Stop Plate with two different mounting positions for your choice of turning radiuses (requires flat type lower Fork Bracket).  1 1/4″ O.D. curved Downtubes, Engine Cradle and Tail Section.  1 3/4″ O.D. Backbone.  1″ wide primary to engine spacer.  TIG welded construction.  Includes weld-on type Brake Stop Tab for 1987/1999 Softail (if desired).  Designed for use with an alternator type Shovelhead or Big Twin Evolution engine.  Includes Manufacturer’s Statement of Origin.


Required Components

Left side drive Softail type transmission, 8 1/2″ wide Rear Wheel designed for a 1″ O.D. Axle, Custom Rear Brake designed for a 1″ O.D. Axle, Custom flat type Lower Fork Bracket suitable to mount the fork stop plate to.  1986/1999 Softail style Forward Controls, Custom Fabricated Seat, Gas Tank Mount and Exhaust, Primary Drive with 1″ offset Engine Sprocket/Pulley and 3/4″ offset Transmission Sprocket.

Note: As with any frame-up custom build project, it is common shop practice to pre-assemble the entire motorcycle prior to any paint work for compatibility verification of all parts used.

Manufacturer: Maximum Metalworks.  40° Rake, -2″ Down Tube Stretch, +5″ Backbone Stretch.  This is 15% off of retail.  $1995.00  Big Savings on this frame.

Wide Style Springer for Custom Use – 40% OFF!! That’s right!

For an antique look with modern handling, this beautifully chrome plated Wide Springer with shock absorber is fully assembled as shown with stem nuts and top clamp. This front end assembly is designed to be used with the OE front fender HD# 59176-88. Due to the size and style of this front fender it can only be used with 21″ wheels designed for FXSTS 1989/Later. This assembly comes with a top clamp with 4 3/4″ centers that uses unthreaded riders and 1/2-20 riser bolts. With our riser adapter and hardware, you can run late style handlebar risers with 3 1/2″ centers. This is a +9″ Springer and is 34″.  Manufacturer: Paughco.  Chrome Plated.  Fits most applications that require 1″ diameter steering stem.  40% off of retail.  No that wasn’t a typo.  During this sale only $1295.00


Odyssey Series II Digital Tachometer

Odyssey Series II, 2 1/16″ O.D..  Designed with the chopper in mind, these gauges do not require any hard to hide external module.  Require the appropriate housing cover and mounting bracket.   The gauge features high visibility digital numerals that are easy to read in full sunlight and include a non-glare high contrast lens.  All calibration is done with the function button.  The tachometer features an adjustable warning point to flash the gauge readout and includes a high RPM readout.  Manufacturer: Dakota Digital.  Chrome Plated Gauge only.

$198.00 save 35% off of retail


Chain Drive and Gear Drive Cams for Twin Cam 5 Speeds 1999-Later

Hydraulic type performance cams are available for use with the OE type chain drive or for use with a gear type drive as listed:

Note: Chain drive cams for 1999 models will require our 66096 splined drive sprocket kit

For best results, we recommend using new tappet assemblies and our 61962 timesaver pushrod set.  Modified Hot Street by Crane Cams: Head Work Chain Drive Cams have high flow heads & 10.25:1 or higher Compression Ratio for 95ci.  Also works great if used with Edelbrock Performer RPM Heads. 2000/6000 RPM, Cam Grind: HTC-296-2.  Requires Big Bore Kit & must use high lift valve springs and check all clearances. Use with performance air filter, ignition & free flow exhaust.

This is over 30% off.  $205.00

For the duration of the Sturgis 2011 Event!  The KandGCycles Online Superstore is up to 40% for the entire store.

We’d love to have you join us in Sturgis,  We’ll be near the Amphitheater at The Buffalo Chip.  Stop on by for a visit.

We’re bringing you great values each week in our Peel-Back Pricing section so be sure to check it out often. Our blog page is worth the click! Find fun, news and more about K and G Cycles at  Come on by and find the perfect part for your ride. Check us out on Facebook at We’d love to hear from you! We work to earn your business every time you shop!