Exhaust, Air Cleaner, and a Tuner – 3 things needed for more Power

Over the past couple of months you modified your bike by finally installing that wicked hot exhaust  you have had your eye on. Understanding both sides need to breath, you also installed a high flow breather. Since you have a fuel injected bike, you aren’t done, K and G Cycles (www.kandgcycles.com) knows you need some type of Fuel Management to set the air/fuel mixture correctly so your mods yield the best results. Dyno Jet has been in the tuning game for a long, long time and knows a thing or two about tuning V-Twin Electronically Fuel Injected bikes using The Power Commander.

Dyno Jet’s Power Commander ispower commander a very versatile system that is so easy to use, you don’t even need to have a computer or Dynamometer to perform the set up. If you wish to a more intense setting for you motorcycle, Power Commanders can also be tuned using a Dyno and sniffers to set the air / fuel ratios to offer more power or better fuel economy, or the happy middle – increased horsepower, decent fuel economy, and good drivability. Power Commanders even come pre-programmed with a specific map designed to increase performance over stock. Power Commanders are virtually a “Plug and Play” tuner that gives you alternatives based on how much you feel your bike needs tuned. Best of all DynoJet’s Power Commander line up has applications from the late 1990’s Magneti Marelli and the current Delphi Fuel injection systems.

If you are looking to tune your bike after the making your mods and don’t want to pay for numerous hours of Dyno time, The DynoJet Power Commander is what you are looking for. Easy to use, easy to tune, and advanced enough for a thorough tune that can be used at the strip. Contact K and G Cycles (www.kandgcycles.com) your Authorized DynoJet Power Commander Dealer and pick up one today and you too can be on the road to performance.