Super Peelback Savings from K and G Cycles!

K and G Cycles wants you to $ave on all the parts we offer. These Peelback items are core to the heart of your machine. When you need to replace the important inner parts of your Harley’s motor, K and G Cycles brings you Quality, Value & Personal Service!

Your choice of Connecting Rods $217.19
These Connecting Rod Assemblies include rods, single hole crank pin, crank pin nuts, piston bushings & rod rollers with aluminum retainers. Everything is fitted with standard size rollers ready to install. All rod sets measure 7.438″ eye to eye.

1941/Early 1981 (Replaces HD 24281-41A and 24281-74A) 15% Off

1981/Early 1983 (Replaces HD 24281-80) 15% Off

Evolution Style Late 1983/1999 (Replaces HD 24281-83) 15% Off

Sportster 1957/Early 1981 (Replaces HD 24275-57A) 15% Off

Sportster Late 1981/1985 (Replaces HD 24275-80) 15% Off

Sportster 1986/1999 (Replaces HD 24275-86) 15% Off

 

Here’s a great deal on a Cam for Big Twin Evolution (All Years)

Time tested and track proven Andrew’s cams have computer enhanced design features that provide a superior combination of performance gains and reliability without sacrificing component longevity. Installation instructions included. Timing and Duration measured at .053″ cam lift.

Listed for reference: 1984/1987/Later OE cam is 212° intake, 202° exhaust, .472″ lift on both valves. Timing 03/39 54/02. Valve lift .495″ .495″. Duration 222 236. Grind OEM (L) 1988/1991.  Listed for reference: 1992/Later OE cam very close to 1984/1987 specs. California cams are approximately 178° duration. Fuel injected “0” cam is 200° duration intake and 216° duration exhaust.  Bolt-in street cam with fast open and close ramps. Similar timing to EV3 but designed to produce a very broad torque band. Pulls 1500 to 6000 RPM. USE STOCK SPRINGS. EFI or Carb. Timing 20/36 44/16. Valve Lift .495″ .495″. Duration 236 240. Grind EV27.  This is Marked down 20% to save you big Bucks.  Only $153.60

 

Need a clutch for your Shovel?  Look at the Diamond Terminator Clutch Basket for Big Twin

Precision machined aluminum clutch basket with replaceable steel chain sprocket, bearing race, ring gear and clutch drive dogs.  Uses OE style clutch pack or our 73346 series D Diamond Terminator clutch kit or our 73339 Stage 1 Diamond Terminator clutch kit.  Features bolt on ring gear for easy replacement.  Weighs less than OE clutch basket Add this state of the art piece to your old Shovel for a great performance upgrade. Black Anodized Clutch Basket.  Fits Big Twin 4 speed 1970/Early 1984.  Replaces HD# 37702-70A  This is a huge 15% savings.  You have to have this one.  Only $425.15

 

One for the Sportsters, Clutch Kit for Sportsters

These clutch kits are made in the USA by one of the largest manufacturers of clutch plates in the world. These clutch kits exceed OEM specifications in every respect and are economical. These clutch kits have a limited lifetime warranty. We will replace at no cost any Alto clutch plate returned to us for any reason. This warranty covers plate only – no labor or other damage.  Fits Sportster Late 1984/1990. 7 friction discs for wet clutch.  20% off only $50.00

 

Or this Clutch Kit for Sportsters

These clutch kits are made in the USA by one of the largest manufacturers of clutch plates in the world. These clutch kits exceed OEM specifications in every respect and are economical. These clutch kits have a limited lifetime warranty. We will replace at no cost any Alto clutch plate returned to us for any reason. This warranty covers plate only – no labor or other damage.  Steel Plate Kit (includes 5 plates), Fits Sportster Late 1984/1990.  Replaces HD# 36787-84

Note: You must also use OEM double riveted spring plate $29.92  This is 20% off Don’t Miss It!!

 

We’re bringing you great values each week in our Peel-Back Pricing section so be sure to check it out often. Our blog page is worth the click! Find fun, news and more about K and G Cycles at www.vtwinmotorcycleblog.com.  Come on by www.kandgcycles.com and find the perfect part for your ride. Check us out on Facebook at www.facebook.com/kandgcycles. We’d love to hear from you! We work to earn your business every time you shop!