Drag Specialties

ARLEN NESS Replacement Rubbers For PART #'s 1621-0257/0260, Deep Cut, Driver, Floorboard

• Machined from two pieces of billet aluminum to create a cutting-edge see-through design
• Adds exceptional style and comfort to your bike
• Available in chrome or black anodized finish; black anodized features machined accents on the top, bottom and side of the floorboard
• Includes all mounting hardware
• Matching passenger boards available (sold separately)
• Driver floorboards: 16" L x 6" W x .75" thick; Passenger floorboards: 7" L x 4" W x 1" thick

GMA ENGINEERING BY BDL Rebuild Kit For GMA Forward Controls

• CNC-machined from billet aluminum
• Unique design and features make these controls a must-have upgrade for your stock or custom motorcycle
• Has a 5/8" bore master cylinder
• Made in the U.S.A.

PAUL YAFFE BAGGER NATION Gloss Black Stealth III License Plate Frame, Harley 09-19 FL

• Clean up the look of your CVO and does away with the light box
• Direct bolt-on installation
• Hidden LEDs in the frame illuminate the license plate
• True plug-and-play wiring installation
• Include all necessary mounting hardware
• Made in the U.S.A.

VANCE & HINES Quiet Baffle, Big Shot Duals, Big Shots Long, Big Shots Staggered, Shortshots Staggered, Sideshots, Softail Duals, Straightshots, Throwbacks, Steel, Sold Each, Round, specific application

• Feature the revolutionary Power Chamber design; a unique cross-over system that increases horsepower and torque
• Armed with full-coverage 21/2" heat shields that are essentially blue-proof for long-lasting style
• Like all Vance & Hines systems, these feature a superior fit and an unrivaled finish in either chrome or race-quality matte black ceramic coat
• Flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-16 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
• Meticulously finished billet end caps
• Removable baffles and all mounting hardware included
• Made in the U.S.A.

ICON RST Chameleon Fog-Free Optics Shield, antifog

• (PRO SHIELDS/PIVOT KITS)Pro shields fit all current generation Icon helmets fitted with the Icon Prolock shield locking system and side plate kits, except Variant, Airmada and Airframe Pro
• Pro shields will not work on other brand helmets with pin locks
• (STANDARD SHIELDS/PIVOT KITS)Standard Icon shields fit all Icon helmets that do not feature the Prolock shield locking system and do not feature side plate kits
• (OPTICS SHIELDS/PIVOT KITS)Optics shields fit Airmada/Airframe Pro helmets fitted with the Icon Prolock shield locking system and side plate kits
• (TRACK SHIELDS)Track shields fit Airmada/Airframe Pro helmets fitted with Icon prolock shield-locking system and side plate kits
• Include posts for attaching removable dust tear-offs

BELT DRIVES LTD. Replacement Starter Housing For Top Fuel Belt Drive, Each

• For use on BDL Belt Drive clutches

DRAG SPECIALTIES Rear Fender Wiring Clips, 10-Pack, Harley 97-07 FX 97-07 FL 99 - 03 XL

• Used to retain wiring that routes under the rear fender
• Sold in 10-pk.; sold to consumer each

NO-MAR Replacement Mount Tip, CH200, Each, Tire Changer

• Oversized heat-treated and case-hardened frame arms for maximum durability
• Sliding and rotating upper arm allows for perfect indexing on any 7-21" wheel
• Kit includes Posi-Clamps, mount/demount bar, one spare demount tip, tire lube, spray bottle, tool collar with spoon bar attachment, two 16" spoon bars and scratch-proof bead breaker
• Yellow Thing's rubberized coating and special design prevents the tire bead from creeping when mounting the top bead
• The XtraHand is a hands-free clamp that holds the tire bead below the rim flange for fast, scratch-free tire mounting
• Portable Roll-On Base, PART #0365-0078, available separately
• SpoonBars with built-in rim protectors were designed to install tires with ease and protection
• Tire mounting pastes also available, see page ???

ZAN HEADGEAR Black Paisley Motley Tube, breathable, Pullover, waterproof, windproof, Neck Tube

• Comfortable in all types of weather
• 100% polyester construction is wind-resistant, breathable and wicks away moisture
• Lightweight, machine washable and dries in minutes
• Wearable as a bandanna, scarf, beanie, balaclava, headband, wristband, helmet-liner, muffler, dust screen and more
• One size fits most adults

SPYKE Grind-Free Starter Jackshaft For BDL 3" Belt Drive, made in the usa, Each, pinion teeth 9, specific application

• The amazing jackshaft fixes the grind associated with BDL 3" open belt drive systems that utilize a one-piece starter jackshaft
• The jackshaft is a three-piece design with ramped teeth and enough flex to integrate seamlessly with the belt drive ring gear
• Made in the U.S.A.

KURYAKYN Plug-N-Play Sissy Bar Pad, 6 3/4" W x 9 1/2" H, Black, Leather, Each, Passenger

• Bolts to the fender underneath the passenger seat
• Accepts Kryakyn's Low sissy bar (available separately)
• Assembly comes pre-drilled to fit stock H-D fenders
• Does not include hardware

S&S CYCLE Super G Shorty Carburetor

• Each carb kit includes an S&S Super E or Super G gas carburetor with updated fuel delivery pots and idle screw, S&S teardrop air cleaner assembly, manifold (unless noted), mounting hardware, fuel line, clamps, overflow line, one extra intermediate jet and two main jets, VOES tubing (when applicable), installation and jetting instructions
• Super E has a 1.875" throat at the butterfly and a 1.5625" venturi and is recommended for use on Big Twin or Sportster engines up to 100-cubic-inch
• Super G has a 2.0625" throat at the butterfly and a 1.75" venturi and is recommended for use on 90-cubic-inch and larger high-performance and modified engines
• 2.0625" G is not recommended for smaller, lower compression engines
• If there is a doubt as to which carburetor to use, we suggest the 1.875" Super E
• Individual carburetors also available
• Made in the U.S.A.

DURO HF903 130/60-13 Front/Rear Tire, Bias, 55J, B-W, Scooter, Tubeless

• Attractive tread design
• Sizes available for most popular scooter models
• Fit both front and rear
• Blackwall
• Tubeless (TL)
• J-rated for speeds up to 62 mph

DRAG SPECIALTIES Replacement Maltese Cross Taillight Lens, Red, Each

• All taillights feature die-cast frame construction
• Many popular styles available
• See pages XXX-XXX for replacement bulbs
• All are sold each

K&L SUPPLY Short Straight Valve Stem, Silver, 8mm

• Includes metal, rubber and aluminum tire valve stems along with most popular styles of caps and cores
• Replacement parts sold separately

ZAN HEADGEAR Black and White Vintage Flag Full Face Mask, breathable, windproof

• Made from 100% neoprene
• Include permanent mouth and eye vents
• Eye opening large enough to accommodate goggles or sunglasses
• Hook-and-loop closure for custom fit
• Patterned masks reverse to solid black
• Oversize masks are made to fit larger heads; small masks are perfect for smaller heads
• Available in full-face and half-mask styles

GOODRIDGE Polished Stainless Steel Universal Brake Line Fitting, Inverted Flare, Straight, fitting. -3 AN x 3/8"- 24, made in the USA

NAMZ OEM-Type Mini MCL Connector, Throttle-By-Wire, Green, specific application, Harley 08-16 FL

• Sold each (unless noted)
• Made in the U.S.A.

TP ENGINEERING Manual Compression Release Valve With Billet Cap, Aluminum, Stainless Steel, SOLD INDIVIDUALLY

• Manufactured from 303 stainless steel
• Available with billet aluminum cap, brass cap or threaded to accept any standard tire valve cap for a truly custom appearance
• Require a .650" 10mm x 1.0mm-threaded hole for installation
• Sold individually
• Made in the U.S.A.

ALLOY ART Compression Release Adapter, 14mm x 3/4" reach

• Designed to be used in twin plug heads
• Accept .650"/10mm x 1.0 compression release valves
• Sold each
• Made in the U.S.A.

S&S CYCLE Replacement Breather Hose, Super E & G, Each, specific application, Harley 93-06 FX 93-06 FL 91 - 03 XL

• Original S&S chrome teardrop air cleaner assemblies
• Include an S&S cover, backing plate and high-quality filter element and hardware kit
• Increase horsepower with no other changes
• Available for most OEM carburetors and S&S performance intake systems
• Available in chrome and black
• Made in the U.S.A.

YOST PERFORMANCE Carburetor Spacer For Super G & D, Polished, size 1"

• Easy way to add extra torque and horsepower
• Machined from solid 6061 T-6 billet aluminum that completely eliminates porosity problems
• Machined finish can be polished to a bright luster
• Made in the U.S.A.

S&S CYCLE Carburetor Float, Super B, Super E, Super G, Each

• Rebuild kits are available in master kits, body-only kits and accelerator pump kits
• Replacement gaskets, O-rings and components are made from the highest-quality materials available
• Made in the U.S.A.