Drag Specialties

PINGEL Black Driver Floorboard Extender Kit, Harley 14-15 FL

• Kits for Dressers move the floorboards outward 11/4"
• Provide greater comfort by moving the legs away from the gas tank and engine heat
• Work well with oversized primary covers
• Kit is easy-to-install using included hardware
• Billet aluminum with a black finish or polished finish
• Compatible with fairing lowers, but not with centerstand
• Made in the U.S.A.

PINGEL Tank Fitting Kit For Fuel-Injection To Carburetor Conversion 22mm, Adapter, Conversion, Plug, Harley 01-03 FX 01-03 FL

• Use when converting from OEM fuel-injection systems to use a carburetor in order to deliver adequate fuel for large-displacement engines
• Kit replaces the factory tank fittings, allowing the use of a high-quality, high-flow Pingel fuel valve to feed the carburetor
• Made of stainless steel
• Kits include adapter and plug or adapter only with O-rings or gaskets
• See Pingel fuel valves on page ???
• Made in the U.S.A.

PINGEL Greaseable Shifter Shaft, Stainless Steel, Natural, Polished, made in the usa, Each, specific application, Harley 85-16 FL

• Manufactured from stainless steel with the exposed end polished so it will match the chrome shift lever
• Designed to prevent shift linkage drag and lockup for OEM models without grease fitting on primary case
• Will accept any stock or aftermarket shift lever that fits the stock shaft
• Made in the U.S.A.

PINGEL Billet Oil Filler Cap, Red, Anodized, Aluminum, Billet Cap, Metric, Kawasaki 03-09, Suzuki 82-15

• Machined from billet aluminum and anodized red
• Ultra-strong oil filler caps will not break or crack like stock oil filler caps
• Knurled body provides a secure fit
• No wrench required
• O-ring included with cap to provide no-leak sealing
• Made in the U.S.A.

PINGEL Oil Filler Cap, Red, Anodized, Aluminum, Honda 87-15, Kawasaki 80-15, Suzuki 03-08, Yamaha 93-15

• Machined from billet aluminum and anodized red
• Ultra-strong oil filler caps will not break or crack like stock oil filler caps
• Knurled body provides a secure fit
• No wrench required
• O-ring included with cap to provide no-leak sealing
• Made in the U.S.A.

PINGEL All Electric Easy Shift Speed Shifter Bolt-On Kit, OEM-Length, made in the usa, specific application, Electric Accuated, Shifter Kit

• Easy shifting for rider comfort and convenience or for speed for the performance-oriented rider
• For performance, this is the best bang-for-your-buck product
• Gain a minimum of one bike length per shift
• Shift up at partial or full throttle and back down with the push of a button
• Eliminate the need to shift with your foot or clutch
• OEM shifting ability is retained after installation
• Clutch use is still required for starting and stopping when using these kits
• Use state-of-the-art control module to send a signal from the button control to the shift solenoid
• Kits include a stylish dual-button shift control for upshifts/downshifts, a chrome-plated electronic shift cylinder, ignition kill module and control modules
• Bolt-on kits include all necessary brackets for a perfect fit
• Universal kits also available with dual-button handlebar control to fit 7/8" or 1" diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately)
• Made in the U.S.A.

PINGEL All Electric Easy Shift Speed Shifter Bolt-On Kit, OEM-Length, made in the usa, specific application, Electric Accuated, Shifter Kit

• Easy shifting for rider comfort and convenience or for speed for the performance-oriented rider
• For performance, this is the best bang-for-your-buck product
• Gain a minimum of one bike length per shift
• Shift up at partial or full throttle and back down with the push of a button
• Eliminate the need to shift with your foot or clutch
• OEM shifting ability is retained after installation
• Clutch use is still required for starting and stopping when using these kits
• Use state-of-the-art control module to send a signal from the button control to the shift solenoid
• Kits include a stylish dual-button shift control for upshifts/downshifts, a chrome-plated electronic shift cylinder, ignition kill module and control modules
• Bolt-on kits include all necessary brackets for a perfect fit
• Universal kits also available with dual-button handlebar control to fit 7/8" or 1" diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately)
• Made in the U.S.A.

PINGEL All Electric Easy Shift Speed Shifter Bolt-On Kit, OEM-Length, made in the usa, specific application, Electric Accuated, Shifter Kit

• Easy shifting for rider comfort and convenience or for speed for the performance-oriented rider
• For performance, this is the best bang-for-your-buck product
• Gain a minimum of one bike length per shift
• Shift up at partial or full throttle and back down with the push of a button
• Eliminate the need to shift with your foot or clutch
• OEM shifting ability is retained after installation
• Clutch use is still required for starting and stopping when using these kits
• Use state-of-the-art control module to send a signal from the button control to the shift solenoid
• Kits include a stylish dual-button shift control for upshifts/downshifts, a chrome-plated electronic shift cylinder, ignition kill module and control modules
• Bolt-on kits include all necessary brackets for a perfect fit
• Universal kits also available with dual-button handlebar control to fit 7/8" or 1" diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately)
• Made in the U.S.A.

PINGEL All Electric Easy Shift Speed Shifter Bolt-On Kit, OEM-Length, made in the usa, specific application, Electric Accuated, Shifter Kit

• Easy shifting for rider comfort and convenience or for speed for the performance-oriented rider
• For performance, this is the best bang-for-your-buck product
• Gain a minimum of one bike length per shift
• Shift up at partial or full throttle and back down with the push of a button
• Eliminate the need to shift with your foot or clutch
• OEM shifting ability is retained after installation
• Clutch use is still required for starting and stopping when using these kits
• Use state-of-the-art control module to send a signal from the button control to the shift solenoid
• Kits include a stylish dual-button shift control for upshifts/downshifts, a chrome-plated electronic shift cylinder, ignition kill module and control modules
• Bolt-on kits include all necessary brackets for a perfect fit
• Universal kits also available with dual-button handlebar control to fit 7/8" or 1" diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately)
• Made in the U.S.A.

PINGEL All Electric Easy Shift Speed Shifter Bolt-On Kit, OEM-Length, made in the usa, specific application, Electric Accuated, Shifter Kit

• Easy shifting for rider comfort and convenience or for speed for the performance-oriented rider
• For performance, this is the best bang-for-your-buck product
• Gain a minimum of one bike length per shift
• Shift up at partial or full throttle and back down with the push of a button
• Eliminate the need to shift with your foot or clutch
• OEM shifting ability is retained after installation
• Clutch use is still required for starting and stopping when using these kits
• Use state-of-the-art control module to send a signal from the button control to the shift solenoid
• Kits include a stylish dual-button shift control for upshifts/downshifts, a chrome-plated electronic shift cylinder, ignition kill module and control modules
• Bolt-on kits include all necessary brackets for a perfect fit
• Universal kits also available with dual-button handlebar control to fit 7/8" or 1" diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately)
• Made in the U.S.A.

PINGEL All Electric Easy Shift Speed Shifter Bolt-On Kit, OEM-Length, made in the usa, specific application, Electric Accuated, Shifter Kit

• Easy shifting for rider comfort and convenience or for speed for the performance-oriented rider
• For performance, this is the best bang-for-your-buck product
• Gain a minimum of one bike length per shift
• Shift up at partial or full throttle and back down with the push of a button
• Eliminate the need to shift with your foot or clutch
• OEM shifting ability is retained after installation
• Clutch use is still required for starting and stopping when using these kits
• Use state-of-the-art control module to send a signal from the button control to the shift solenoid
• Kits include a stylish dual-button shift control for upshifts/downshifts, a chrome-plated electronic shift cylinder, ignition kill module and control modules
• Bolt-on kits include all necessary brackets for a perfect fit
• Universal kits also available with dual-button handlebar control to fit 7/8" or 1" diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately)
• Made in the U.S.A.

PINGEL Suspension Lowering Link, Silver, made in the usa, Aluminum, specific application

• Fine-quality 6061 T-6 or 7075 T-6 aluminum suspension lowering links
• The hot ticket for lowering your bike and getting the horsepower to the ground
• Do not include bushings unless noted
• Made in the U.S.A.

PINGEL SWINGARM SPOOL BLK YAM, Black, made in the usa, Swingarm Spool Slider

• Designed for use with rear stands as well as providing protection to the swingarm when the bike is laid down
• Constructed of black Delrin plastic and aircraft aluminum
• Include stainless hardware
• Made in the U.S.A.

PINGEL SWINGARM SPOOL BLK HON/SU, Black, made in the usa, specific application, Swingarm Spool Slider

• Designed for use with rear stands as well as providing protection to the swingarm when the bike is laid down
• Constructed of black Delrin plastic and aircraft aluminum
• Include stainless hardware
• Made in the U.S.A.

PINGEL SWINGARM SPOOL BLK KAW, Black, made in the usa, Swingarm Spool Slider

• Designed for use with rear stands as well as providing protection to the swingarm when the bike is laid down
• Constructed of black Delrin plastic and aircraft aluminum
• Include stainless hardware
• Made in the U.S.A.

PINGEL Suspension Lowering Link, Silver, made in the usa, Aluminum, specific application

• Fine-quality 6061 T-6 or 7075 T-6 aluminum suspension lowering links
• The hot ticket for lowering your bike and getting the horsepower to the ground
• Do not include bushings unless noted
• Made in the U.S.A.

PINGEL POWER FLO VALVE HONDA, made in the usa, Fuel Valve

• High-performance fuel valves unequaled for over 35 years
• Substantially higher fuel flow than any aftermarket fuel valve
• Some models will require an adapter plate (available separately); see chart below
• For models requiring an adapter plate that is not listed, use the blank style and drill the mounting holes needed in the adapter plate
• The GSX-R valve does not have a provision for reserve
• Made in the U.S.A.

NOTE: Not legal for street use in CA for all make/model/year applications.

NOTE: HOW TO MEASURE YOUR BOLT PATTERN: If you don't have a measuring instrument such as a dial caliper to measure the center to center bolt distance on your stock fuel valve, try this method: bend a piece of stiff wire into a horseshoe shape and center the ends from bolt to bolt. Then transfer that measurement to a ruler.

PINGEL BAR ENDS DELRIN YAMAHA, Black, made in the usa

• Choice of CNC-machined billet aluminum with a highly polished finish or black Delrin plastic
• Help minimize handlebar damage in the event of a crash
• Clean appearance without logos for a smooth, custom look
• Polished stainless steel screws included where applicable
• Sold in pairs
• Made in the U.S.A.

PINGEL BAR ENDS DELRIN KAWASAKI, Black, made in the usa

• Choice of CNC-machined billet aluminum with a highly polished finish or black Delrin plastic
• Help minimize handlebar damage in the event of a crash
• Clean appearance without logos for a smooth, custom look
• Polished stainless steel screws included where applicable
• Sold in pairs
• Made in the U.S.A.

PINGEL BAR ENDS DELRIN KAWASAKI, Black, made in the usa

• Choice of CNC-machined billet aluminum with a highly polished finish or black Delrin plastic
• Help minimize handlebar damage in the event of a crash
• Clean appearance without logos for a smooth, custom look
• Polished stainless steel screws included where applicable
• Sold in pairs
• Made in the U.S.A.

PINGEL BAR ENDS DELRIN Suzuki, Black, made in the usa

• Choice of CNC-machined billet aluminum with a highly polished finish or black Delrin plastic
• Help minimize handlebar damage in the event of a crash
• Clean appearance without logos for a smooth, custom look
• Polished stainless steel screws included where applicable
• Sold in pairs
• Made in the U.S.A.

PINGEL BAR ENDS DELRIN Suzuki, Black, made in the usa, Plastic, specific application

• Choice of CNC-machined billet aluminum with a highly polished finish or black Delrin plastic
• Help minimize handlebar damage in the event of a crash
• Clean appearance without logos for a smooth, custom look
• Polished stainless steel screws included where applicable
• Sold in pairs
• Made in the U.S.A.

PINGEL BAR ENDS DELRIN HONDA, Black, made in the usa

• Choice of CNC-machined billet aluminum with a highly polished finish or black Delrin plastic
• Help minimize handlebar damage in the event of a crash
• Clean appearance without logos for a smooth, custom look
• Polished stainless steel screws included where applicable
• Sold in pairs
• Made in the U.S.A.

PINGEL BAR ENDS ALM HONDA, Silver, made in the usa, Aluminum

• Choice of CNC-machined billet aluminum with a highly polished finish or black Delrin plastic
• Help minimize handlebar damage in the event of a crash
• Clean appearance without logos for a smooth, custom look
• Polished stainless steel screws included where applicable
• Sold in pairs
• Made in the U.S.A.

PINGEL LOWERING BUSHINGS 1", made in the usa, specific application, 1" Lowering, Bushing Kit

• Drop the front end 1" in less time than it takes to go to the store and get bread
• Simple installation will add speed on the track and low down on the street
• Manufactured from 6061 T-6 polished billet aluminum; includes mounting bolts
• Made in the U.S.A.

PINGEL LOWERING BUSHNGS FRT KAW, made in the usa, Bushing Kit

• Drop the front end 1" in less time than it takes to go to the store and get bread
• Simple installation will add speed on the track and low down on the street
• Manufactured from 6061 T-6 polished billet aluminum; includes mounting bolts
• Made in the U.S.A.

PINGEL Custom Oil Dipstick, Silver, made in the usa, Aluminum, Right-Side, Dip Stick

• Dress up the right side of the Victory with this custom highly polished billet aluminum dipstick
• Easily replaces the unsightly stock one, using the stock O-ring for installation
• Made in the U.S.A.

PINGEL Black Rear Shock Lowering Bracket Kit, Harley 97-01 FL

• Makes the motorcycle much easier to get off the side stand and gives more rider control over the motorcycle with its lower center of gravity
• Lowers your bike 1" leaving adequate room for stock tire-to-fender clearance; designed to retain the use of the stock rubber shock boot
• CNC-machined with a black finish
• Easy to install in approximately 30 minutes with common tools, and includes instructions and hardware
• Made in the U.S.A.

PINGEL Hex-Style Vacuum Fuel Valve, Backward

• Have the highest fuel flow of any vacuum-style fuel valve on the market
• The same feature as OEM vacuum fuel valves - when valve is left in the "on" position with the motor off, fuel flow is shut off automatically
• High-quality, lustrous chrome finish is the same as Pingel's Power-Flo line of fuel valves
• Fits all 94-06 stock applications with 22mm external thread
• Will also fit 84-93 models if a vacuum source is tapped
• Outlet is a single 5/16" hose barb and will accept the stock vacuum line
• Made in the U.S.A.

PINGEL Hex-Style Vacuum Fuel Valve

• Have the highest fuel flow of any vacuum-style fuel valve on the market
• The same feature as OEM vacuum fuel valves - when valve is left in the "on" position with the motor off, fuel flow is shut off automatically
• High-quality, lustrous chrome finish is the same as Pingel's Power-Flo line of fuel valves
• Fits all 94-06 stock applications with 22mm external thread
• Will also fit 84-93 models if a vacuum source is tapped
• Outlet is a single 5/16" hose barb and will accept the stock vacuum line
• Made in the U.S.A.

PINGEL Hex-Style Vacuum Fuel Valve, Forward

• Have the highest fuel flow of any vacuum-style fuel valve on the market
• The same feature as OEM vacuum fuel valves - when valve is left in the "on" position with the motor off, fuel flow is shut off automatically
• High-quality, lustrous chrome finish is the same as Pingel's Power-Flo line of fuel valves
• Fits all 94-06 stock applications with 22mm external thread
• Will also fit 84-93 models if a vacuum source is tapped
• Outlet is a single 5/16" hose barb and will accept the stock vacuum line
• Made in the U.S.A.

PINGEL All Electric Easy Shift Speed Shifter Kit, specific application, Harley 02 - 11 VR

• For speed, comfort and fun
• Electronically suspends the ignition system, allowing the transmission to smoothly shift up or down with just the push of a button
• Shift up at partial or full throttle and back down at the touch of a button
• There is no need to use the foot shifter and the clutch is used only when starting or stopping
• Works for normal street riding or full-throttle shifting
• Also a perfect match for male and female riders who own bikes that require a lot of hand strength to pull in the clutch lever
• OEM shifting ability is retained after installation
• Includes a dual-button handlebar control, a shift cylinder plated with a lustrous chrome finish, bolt-on shift cylinder support bracket and a state-of-the-art control module that sends a quick signal from the handlebar control to the shift cylinder
• Also included is the electronic ignition kill module and step-by-step instructions with photos for easy installation
• Universal kits also available with dual-button handlebar control to fit 7/8" or 1" diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately)
• Not suitable for 4-speed transmissions
• Made in the U.S.A.

PINGEL All Electric Easy Shift Speed Shifter Kit, With Forward Controls., specific application, Harley 03-05 FX

• For speed, comfort and fun
• Electronically suspends the ignition system, allowing the transmission to smoothly shift up or down with just the push of a button
• Shift up at partial or full throttle and back down at the touch of a button
• There is no need to use the foot shifter and the clutch is used only when starting or stopping
• Works for normal street riding or full-throttle shifting
• Also a perfect match for male and female riders who own bikes that require a lot of hand strength to pull in the clutch lever
• OEM shifting ability is retained after installation
• Includes a dual-button handlebar control, a shift cylinder plated with a lustrous chrome finish, bolt-on shift cylinder support bracket and a state-of-the-art control module that sends a quick signal from the handlebar control to the shift cylinder
• Also included is the electronic ignition kill module and step-by-step instructions with photos for easy installation
• Universal kits also available with dual-button handlebar control to fit 7/8" or 1" diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately)
• Not suitable for 4-speed transmissions
• Made in the U.S.A.

PINGEL All Electric Easy Shift Speed Shifter Kit, With Floorboards., specific application, Harley 90-99 FX 90-99 FL

• For speed, comfort and fun
• Electronically suspends the ignition system, allowing the transmission to smoothly shift up or down with just the push of a button
• Shift up at partial or full throttle and back down at the touch of a button
• There is no need to use the foot shifter and the clutch is used only when starting or stopping
• Works for normal street riding or full-throttle shifting
• Also a perfect match for male and female riders who own bikes that require a lot of hand strength to pull in the clutch lever
• OEM shifting ability is retained after installation
• Includes a dual-button handlebar control, a shift cylinder plated with a lustrous chrome finish, bolt-on shift cylinder support bracket and a state-of-the-art control module that sends a quick signal from the handlebar control to the shift cylinder
• Also included is the electronic ignition kill module and step-by-step instructions with photos for easy installation
• Universal kits also available with dual-button handlebar control to fit 7/8" or 1" diameter handlebars/clip-ons; installation may require purchase of frame tube brackets for shift cylinder mounting (sold separately)
• Not suitable for 4-speed transmissions
• Made in the U.S.A.