XL Tappets

V-Twin Manufacturing Motorcycle Solid Tappet Kit fits XL 1957-1985 Ironhead - Kit
Motorcycle Solid Tappet Kit Includes four standard tappets with adjusters, and four tappet blocks. Fits: XL 1957-1985 Ironhead UOM: 1 - KIT Country of Origin: Imported

Tappet,Mech Big Axle +.005"Od Ironhead Sportster 1957/Later No Hd Part # Jims 2473-1
Jims offers you a choice of four different types of Big Axle Tappet Assemblies. The first type is the Standard Style Mechanical Tappet. The second type is the Standard Style Hydraulic Tappet. The third type is the Powerglide Hydraulic Tappet and the fourth type is the Hydrosolid Tappet. All assemblies listed are of the Big Axle Roller design. The roller is designed around only three working parts that have been improved for durability and reliability. The Big Axle Tappet has a 27% greater wall that reduces harmonic distortion for better tracking of the cam lobe. In addition, the pin bearings have been reduced in size to increase RPM for more precise tracking around the axle, and the axle Fitself has been increased in diameter by 36%. The simplicity of this new design is that the axle serves as the inner race meaning the pin bearings and outer wheel rotate around the axle and not on an inner race, eliminating all possible movement. All tappet assemblies are sold each and include instructions.

Standard Style

1. The Standard Style Mechanical Tappet Assembly is an excellent choice for OE replacement when used in Panheqad 1948/1952 & Ironhead Sportsters and can be used with the OE style and thread size pushrod adjuster and lock nuts. They can also be used when converting from hydraulic to mechanical (solid) on Panhead 1953/Later and all Shovelheads.
2. The Standard Style Mechanical Tappet Assembly for Evolution Big Twin and Sportster Evolution 1986/1990 is similar to a hydraulic body but has a removable seat and must be used with adjustable pushrods.
3. The Standard Style Hydraulic Tappet Assembly for Panhead 1953/Later and Shovelhead, all years, is an excellent choice for OE replacement and must be used with the OE style hydraulic tappet insert. Use with the OE style adjustable pushrods.

Powerglide Hydraulic

1. The Powerglide Hydraulic Tappet Assembly is designed for the performance minded and is the closest thing to a solid lifter as possible and still remain a hydraulic lifter. It is capable of 8000 RPM.

Hydrosolid Hydraulic

1. The Hydrosolid Hydraulic Tappet Assembly is the ultimate high performance/RPM tappet available. The Hydrosolid performs like a hydraulic tappet up to about 5500 RPM and then turns into a solid tappet. The second it turns into a solid tappet it adds about three to six more useable horsepower. Hydrosolids will not pump up and allow your valves to hit each other and can be used with hydraulic type or solid type cams.

Standard Style. Fits Ironhead Sportster all years. .731STD +.005.

Tappet,Hyd Powerglide Std Od Sportster 1991/1999 Rpls Hd 18526-89 Jims 18526-Pg
Jims offers you a choice of four different types of Big Axle Tappet Assemblies. The first type is the Standard Style Mechanical Tappet. The second type is the Standard Style Hydraulic Tappet. The third type is the Powerglide Hydraulic Tappet and the fourth type is the Hydrosolid Tappet. All assemblies listed are of the Big Axle Roller design. The roller is designed around only three working parts that have been improved for durability and reliability. The Big Axle Tappet has a 27% greater wall that reduces harmonic distortion for better tracking of the cam lobe. In addition, the pin bearings have been reduced in size to increase RPM for more precise tracking around the axle, and the axle Fitself has been increased in diameter by 36%. The simplicity of this new design is that the axle serves as the inner race meaning the pin bearings and outer wheel rotate around the axle and not on an inner race, eliminating all possible movement. All tappet assemblies are sold each and include instructions.

Standard Style

1. The Standard Style Mechanical Tappet Assembly is an excellent choice for OE replacement when used in Panheqad 1948/1952 & Ironhead Sportsters and can be used with the OE style and thread size pushrod adjuster and lock nuts. They can also be used when converting from hydraulic to mechanical (solid) on Panhead 1953/Later and all Shovelheads.
2. The Standard Style Mechanical Tappet Assembly for Evolution Big Twin and Sportster Evolution 1986/1990 is similar to a hydraulic body but has a removable seat and must be used with adjustable pushrods.
3. The Standard Style Hydraulic Tappet Assembly for Panhead 1953/Later and Shovelhead, all years, is an excellent choice for OE replacement and must be used with the OE style hydraulic tappet insert. Use with the OE style adjustable pushrods.

Powerglide Hydraulic

1. The Powerglide Hydraulic Tappet Assembly is designed for the performance minded and is the closest thing to a solid lifter as possible and still remain a hydraulic lifter. It is capable of 8000 RPM.

Hydrosolid Hydraulic

1. The Hydrosolid Hydraulic Tappet Assembly is the ultimate high performance/RPM tappet available. The Hydrosolid performs like a hydraulic tappet up to about 5500 RPM and then turns into a solid tappet. The second it turns into a solid tappet it adds about three to six more useable horsepower. Hydrosolids will not pump up and allow your valves to hit each other and can be used with hydraulic type or solid type cams.

Powerglide Hydraulic. Fits Evolution Sportster 1991/1999. .9035.

V-Twin Manufacturing JIMS Power Glide Tappet XL - Sold Each

Jims big axle standard power glide hydraulic tappet assembly includes roller assembly installed.
Order adjuster screws or nuts where necessary.

FXST 1999-UP
FLST 1999-UP
FLT 1999-UP
FXD 1999-UP
XL 2000-UP

V-Twin Manufacturing 1991-1999 JIMS Hydraulic Solid Tappet Assembly XL - Sold Each

Jims hydrosolid standard tappet assembly includes roller assembly installed.
Order adjuster screws or nuts where necessary. **NOTE: Tappet adjustment will make the pushrod tight. Wait 5-15 minutes or longer to fully bleed

V-Twin Manufacturing Sifton Solid Tappet Kit XL - Kit

Includes roller tappets and fully adjustable pushrod set.

XL 1986-1990

V-Twin Manufacturing Sifton HydraulicTappet Kit XL - Kit

Includes roller tappets and fully adjustable pushrod set.

XL 1986-1990

V-Twin Manufacturing Sifton Tappet Kit, 2000-up Hydraulic XL - Kit

Includes roller tappets and fully adjustable pushrod set.

XL 2000-UP

V-Twin Manufacturing 1957-1985 Sifton Max-Axle Tappet Set Std XL - Set

Feature centrifical surface fine grinding and max-axle precision fit with maxi-roller and pin assembly.
Includes the adjuster screws and lock nuts.

XL 1957-1985

V-Twin Manufacturing JIMS HydraulicSolid .002 Tappet ASSY BX XL - Sold Each

Jims big axle tappet assembly, .002, hydrosolid. Roller assembly installed and has a built in anti-pump device, performs like a hydraulic from start up to about 5500 RPM and turns into a solid at 5600 RPM. For Evolution engines

FXST 1986-199

V-Twin Manufacturing JIMS HydraulicSolid Tappet Assembly STD XL - Sold Each

Jims big axle tappet assembly, standard, hydrosolid. Roller assembly installed and has a built in anti-pump device, perform like a hydraulic from start up to about 5500 RPM and turns into a solid at 5600 RPM. For Evolution engines.

FXST 1984

V-Twin Manufacturing Solid .005 Tappet JIMS BIG Axle XL - Sold Each

Jims .005 oversize solid tappets can be only used with adjustable pushrods.

XL 1986-1999

V-Twin Manufacturing Solid Tappet STD JIMS BIG Axle XL - Sold Each

Jims standard solid tappets can only be used with adjustable pushrods. Tappet has an outer diameter of .8425".

XL 1986-1990

V-Twin Manufacturing Crane Evo Tappet Roller Kit XL - Kit

Repair kit includes 4 pins and 4 roller assemblies.

XL 1986-1999

V-Twin Manufacturing .005 Lightning Tappet, 1957-85 XL - Sold Each

Unit is precision machined and drilled for earlier motors. Holes allow better lubrication in valve train.
Adjuster screws are included

XL 1957-1985

V-Twin Manufacturing .005 Tappet Assembly, 1957-86 XL - Sold Each

Eastern brand assembly includes installed standard roller assembly and adjuster screws.

XL 1957-1985

Measurements:

Outer Diameter: .7260
Roller Diameter: .3630
Length: .34965

V-Twin Manufacturing Std Tappet Assembly, 1957-86 XL - Sold Each

Eastern solid standard tappet assembly includes roller assembly installed.

OEM: 18508-52B

XL 1957-1985

Measurements:

Outer Diameter: .7260
Roller Diameter: .3630
Length: .34965

V-Twin Manufacturing .020 Tappet Assembly w-Adjuster, 1957-85 XL - Sold Each

Eastern brand assembly includes installed standard roller assembly and adjuster screws.

XL 1957-1985