Thundermax from K and G Cycles!
8 products
8 products
THUNDERMAX Thundermax Pigtail Harness, Each, Secondary
DS-10220059
Regular price $20.95In Stock
/
Shipping calculated at checkout.
THUNDERMAX Thundermax Pigtail Harness, Each, Secondary
- Allows a second port for the communication cable connection to the ThunderMax
- It is installed to the bike's wiring harness at the 36-pin ECM connector (connection requires harness plug disassembly; two terminated wires are inserted into two unused ports in the 36-pin connector, and a ground wire added)
- Handy for motorcycle models with tight clearances around the ECM such as Dyna, Softail Rocker and 02-05 V-Rod models
- Made in the U.S.A.
THUNDERMAX ThunderMax ECM With Integral Auto Tune System, Harley 04-11 FX 10 - 13 XL
DS-10202361
Regular price $1,088.95In Stock
/
Shipping calculated at checkout.
THUNDERMAX ThunderMax ECM With Integral Auto Tune System, Harley 04-11 FX 10 - 13 XL
- ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness
- Utilizes wide-band O sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle's air/fuel ratio for all riding conditions
- Easy installation: replace the factory ECM, install new O sensors and harness, load the correct map for your bike, and ride
- Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wide-band sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User's Manual, technical support and free software and updates
- Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) - load the map of your choice and the integral auto-tune will do the rest
- Improves throttle response, exhaust sound and driveability
- Does not require dyno tuning
- Rider can adjust idle speed, rev limit and speedometer calibration
- Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps
- Works with all popular exhaust systems and is compatible with high-performance camshafts
- Supports turbo, nitrous and supercharger applications
- Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation
- New maps, software, firmware updates, map analysis and tech support available online at no charge
- Made in the U.S.A.
THUNDERMAX ThunderMax ECM With Integral Auto Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 12-15 FX 12-15 FL 14 - 15 XL
DS-10202360
Regular price $1,088.95In Stock
/
Shipping calculated at checkout.
THUNDERMAX ThunderMax ECM With Integral Auto Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 12-15 FX 12-15 FL 14 - 15 XL
- ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness
- Utilizes wide-band O sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle's air/fuel ratio for all riding conditions
- Easy installation: replace the factory ECM, install new O sensors and harness, load the correct map for your bike, and ride
- Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wide-band sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User's Manual, technical support and free software and updates
- Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) - load the map of your choice and the integral auto-tune will do the rest
- Improves throttle response, exhaust sound and driveability
- Does not require dyno tuning
- Rider can adjust idle speed, rev limit and speedometer calibration
- Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps
- Works with all popular exhaust systems and is compatible with high-performance camshafts
- Supports turbo, nitrous and supercharger applications
- Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation
- New maps, software, firmware updates, map analysis and tech support available online at no charge
- Made in the U.S.A.
THUNDERMAX Thundermax ECM With Integral Auto Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 14-15 FL
DS-10202118
Regular price $1,088.95In Stock
/
Shipping calculated at checkout.
THUNDERMAX Thundermax ECM With Integral Auto Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 14-15 FL
- ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness
- Utilizes wide-band O sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle's air/fuel ratio for all riding conditions
- Easy installation: replace the factory ECM, install new O sensors and harness, load the correct map for your bike, and ride
- Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wide-band sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User's Manual, technical support and free software and updates
- Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) - load the map of your choice and the integral auto-tune will do the rest
- Improves throttle response, exhaust sound and driveability
- Does not require dyno tuning
- Rider can adjust idle speed, rev limit and speedometer calibration
- Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps
- Works with all popular exhaust systems and is compatible with high-performance camshafts
- Supports turbo, nitrous and supercharger applications
- Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation
- New maps, software, firmware updates, map analysis and tech support available online at no charge
- Made in the U.S.A.
THUNDERMAX Thundermax ECM With Integral Auto-Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 02 - 15 VR
DS-10201853
Regular price $1,088.95In Stock
/
Shipping calculated at checkout.
THUNDERMAX Thundermax ECM With Integral Auto-Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 02 - 15 VR
- ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness
- Utilizes wide-band O sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle's air/fuel ratio for all riding conditions
- Easy installation: replace the factory ECM, install new O sensors and harness, load the correct map for your bike, and ride
- Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wide-band sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User's Manual, technical support and free software and updates
- Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) - load the map of your choice and the integral auto-tune will do the rest
- Improves throttle response, exhaust sound and driveability
- Does not require dyno tuning
- Rider can adjust idle speed, rev limit and speedometer calibration
- Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps
- Works with all popular exhaust systems and is compatible with high-performance camshafts
- Supports turbo, nitrous and supercharger applications
- Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation
- New maps, software, firmware updates, map analysis and tech support available online at no charge
- Made in the U.S.A.
THUNDERMAX Thundermax ECM With Integral Auto-Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 01-10 FX 01-10 FL 07 - 09 XL
DS-10201851
Regular price $1,088.95In Stock
/
Shipping calculated at checkout.
THUNDERMAX Thundermax ECM With Integral Auto-Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 01-10 FX 01-10 FL 07 - 09 XL
- ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness
- Utilizes wide-band O sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle's air/fuel ratio for all riding conditions
- Easy installation: replace the factory ECM, install new O sensors and harness, load the correct map for your bike, and ride
- Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wide-band sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User's Manual, technical support and free software and updates
- Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) - load the map of your choice and the integral auto-tune will do the rest
- Improves throttle response, exhaust sound and driveability
- Does not require dyno tuning
- Rider can adjust idle speed, rev limit and speedometer calibration
- Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps
- Works with all popular exhaust systems and is compatible with high-performance camshafts
- Supports turbo, nitrous and supercharger applications
- Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation
- New maps, software, firmware updates, map analysis and tech support available online at no charge
- Made in the U.S.A.
THUNDERMAX Thundermax ECM With Integral Auto-Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 11-11 FX 11-11 FL
DS-10201848
Regular price $1,088.95In Stock
/
Shipping calculated at checkout.
THUNDERMAX Thundermax ECM With Integral Auto-Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 11-11 FX 11-11 FL
- ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness
- Utilizes wide-band O sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle's air/fuel ratio for all riding conditions
- Easy installation: replace the factory ECM, install new O sensors and harness, load the correct map for your bike, and ride
- Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wide-band sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User's Manual, technical support and free software and updates
- Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) - load the map of your choice and the integral auto-tune will do the rest
- Improves throttle response, exhaust sound and driveability
- Does not require dyno tuning
- Rider can adjust idle speed, rev limit and speedometer calibration
- Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps
- Works with all popular exhaust systems and is compatible with high-performance camshafts
- Supports turbo, nitrous and supercharger applications
- Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation
- New maps, software, firmware updates, map analysis and tech support available online at no charge
- Made in the U.S.A.
THUNDERMAX Thundermax ECM With Integral Auto-Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 08-13 FL
DS-10200836
Regular price $1,088.95In Stock
/
Shipping calculated at checkout.
THUNDERMAX Thundermax ECM With Integral Auto-Tune System, Requires Exhaust With 18MM Sensor Bungs., Harley 08-13 FL
- ThunderMax ECM with Auto-Tune module mounts conveniently in place of the factory ECM and plugs in to the existing harness
- Utilizes wide-band O sensors and works as a closed-loop control system to continuously self-adjust and properly tune the motorcycle's air/fuel ratio for all riding conditions
- Easy installation: replace the factory ECM, install new O sensors and harness, load the correct map for your bike, and ride
- Includes ThunderMax ECM with Auto-Tune Module, plug-in harness and two wide-band sensors, TMax software and communication USB cable, Quick-Start Easy Install and Comprehensive User's Manual, technical support and free software and updates
- Hundreds of maps available to download for your bike (based on model, engine size, exhaust system air cleaner, pistons, cams, etc.) - load the map of your choice and the integral auto-tune will do the rest
- Improves throttle response, exhaust sound and driveability
- Does not require dyno tuning
- Rider can adjust idle speed, rev limit and speedometer calibration
- Adjustable front and rear cylinder AFR maps, ignition timing (spark) maps, and startup maps
- Works with all popular exhaust systems and is compatible with high-performance camshafts
- Supports turbo, nitrous and supercharger applications
- Software program allows live monitoring, recording and examination of diagnostic codes and datalogs including number of starts, engine temperature and rpm operation
- New maps, software, firmware updates, map analysis and tech support available online at no charge
- Made in the U.S.A.
