All

RACE TECH Rear Shock Spring, length 275mm, made in the usa, specific application, spring rate 11.6 kg/mm

• High-quality, high-performance shock springs
• Accurate to within .05 kg/mm
• Made of high-grade chrome silicon spring steel
• Shot-peened, heat-treated and preset (no sacking)
• Outstanding stiffness-to-mass ratio
• Measure 275mm L x 59.5mm i.d. 1 x 62mm i.d. 2

RACE TECH Rear Shock Spring, length 275mm, made in the usa, specific application, spring rate 8.9kg/mm

• High-quality, high-performance shock springs
• Accurate to within .05 kg/mm
• Made of high-grade chrome silicon spring steel
• Shot-peened, heat-treated and preset (no sacking)
• Outstanding stiffness-to-mass ratio
• Measure 275mm L x 59.5mm i.d. 1 x 62mm i.d. 2

RACE TECH REBOUND Gold VLV FORK KT, Aprilia 01-04, Ducati 02-09, Honda 90-11, Hyosung 05-07, Kawasaki 01-12, Suzuki 02-09, Triumph 04-11, Yamaha 03-11

• For precision and control
• Includes Rebound Gold Valves, all necessary hardware and instructions
• Used by many factory teams

RACE TECH RT FORK HOLDING TOOL, made in the usa

• Makes disassembly and assembly of twin-chamber cartridge forks easier by holding cartridge rod while bottom nut is loosened or tightened

RACE TECH Shock Dust Seal, made in the usa, Each, specific application, Seal Kit

• Sold each or in a set of one oil seal and one dust seal

RACE TECH Shock Lowering Spacer Kit, made in the usa, size 14mm, specific application, Shock Spacer Kit

• Install easily between the seal head and the compression base plate on the shock shaft
• Lowers the bike 1" to 4"
• Kit includes spacers in thicknesses from 2mm to 15mm
• Available for three shock shaft sizes

NOTE: Not for shocks with top-out spring.

RACE TECH Shock Lowering Spacer Kit, made in the usa, size 16mm, specific application, Shock Spacer Kit

• Install easily between the seal head and the compression base plate on the shock shaft
• Lowers the bike 1" to 4"
• Kit includes spacers in thicknesses from 2mm to 15mm
• Available for three shock shaft sizes

NOTE: Not for shocks with top-out spring.

RACE TECH Shock Lowering Spacer Kit, made in the usa, size 18mm, specific application, Shock Spacer Kit

• Install easily between the seal head and the compression base plate on the shock shaft
• Lowers the bike 1" to 4"
• Kit includes spacers in thicknesses from 2mm to 15mm
• Available for three shock shaft sizes

NOTE: Not for shocks with top-out spring.

RACE TECH Shock Oil And Dust Seal, made in the usa, specific application, Seal Kit

• Sold each or in a set of one oil seal and one dust seal

RACE TECH Shock Pre-Load Adjustment Tool, made in the usa, Steel

• Prevents damage to shock spring collars when pre-load is adjusted
• Bent and rounded tip fits into tight places and minimizes damage
• Heat-treated hardened-tool steel handles strain and wear

RACE TECH Shock Rebound Separator Valve, made in the usa, Rear, specific application

• Replace the stock shaft nut with an asymmetric valve to offer different flow rates for compression and rebound
• The stock low speed rebound adjuster flows at the same rate during compression and rebound which makes the lowest speed damping too mushy, causing bottoming and an unresponsive feeling during long duration hits; shock rebound separator valves correct this issue

RACE TECH Shock Rebound Separator Valve, made in the usa, Rear, specific application

• Replace the stock shaft nut with an asymmetric valve to offer different flow rates for compression and rebound
• The stock low speed rebound adjuster flows at the same rate during compression and rebound which makes the lowest speed damping too mushy, causing bottoming and an unresponsive feeling during long duration hits; shock rebound separator valves correct this issue

RACE TECH Shock Retaining Clip Tool, made in the usa, Steel

• Makes removing shock retaining clips a cinch
• Hardened tool steel construction
• Gets behind round wire clips without marring shock bodies

Race Tech Shock Seal Head Assembly, made in the usa, Each, size 40mm, specific application, Shock Seal Head Kit

• Race Tech Shock Seal Head Assembly, made in the usa, Each, size 40mm, specific application, Shock Seal Head Kit. Sold each.

Race Tech Shock Seal Head Assembly, made in the usa, Each, size 46mm, specific application, Shock Seal Head Kit

• Race Tech Shock Seal Head Assembly, made in the usa, Each, size 46mm, specific application, Shock Seal Head Kit. Sold each.

RACE TECH SHOCK SEAL HEAD SET TOOL, note 40-46mm, Shock Seal Head Setting Tool

• Allows easy removal and installation of shock seal assemblies
• For all 33-50mm shocks with integral seal head assemblies

RACE TECH Shock Shaft Bushings, Front, Shock Bushing, Arctic Cat 06-08, Honda 82-09, Kawasaki 86-14, Suzuki 82-08, Yamaha 00-05

• Rebuild the seal head assembly for a fraction of the cost of new
• High-quality, low-friction, PTFE-coated shaft bushings for performance and longevity

RACE TECH Shock Shafts, Aluminum, Shaft Holding Tool

• A must for all suspension work
• For a firm grip on shock shafts, fork cartridges, damping rods or other round shafts while servicing
• Tough, aluminum construction
• Available in 14mm, 16mm and 18mm

RACE TECH SPRING FORK BMW .95 KG/MM, Natural, fork tube diameter 40.6mm, length 470mm, made in the usa, Front

• Accuracy and performance
• Accurate rates to within 2%
• High stiffness-to-mass ratio, shot-peened, heat-treated and preset chrome silicon steel
• Choose from varying spring rates to suit your riding style and comfort

RACE TECH SUPER SLICK INNER BUSHING, Honda 83-15, Suzuki 90-09, Triumph 99-07, Yamaha 97-12

• Revolutionary low-friction design ensures high-quality suspension performance
• Constructed of FEP and tin composite, these PTFE-coated bushings have the lowest friction properties available
• Inner bushings mount on the inner (chrome) fork tube and have PTFE on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and have PTFE on the inside of the bushing
• Sold in pairs

RACE TECH SUPER SLICK OUTER BUSHING, Outer Bushing - SUPER SLICK FORK BUSHINGS, Honda 82-96, Husqvarna 1995, Kawasaki 81-12, KTM 03-14, Suzuki 81-11, Triumph 94-10, Yamaha 81-12

• Revolutionary low-friction design ensures high-quality suspension performance
• Constructed of FEP and tin composite, these PTFE-coated bushings have the lowest friction properties available
• Inner bushings mount on the inner (chrome) fork tube and have PTFE on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and have PTFE on the inside of the bushing
• Sold in pairs

RACE TECH SUPER SLICK OUTER BUSHING, Outer Bushing - SUPER SLICK FORK BUSHINGS, Triumph 97-01

• Revolutionary low-friction design ensures high-quality suspension performance
• Constructed of FEP and tin composite, these PTFE-coated bushings have the lowest friction properties available
• Inner bushings mount on the inner (chrome) fork tube and have PTFE on the outside of the bushing; outer bushings mount on the outer (aluminum) fork tube and have PTFE on the inside of the bushing
• Sold in pairs

RACE TECH TOOL FORK CAP WRENCH, made in the usa

• Unique design works on multiple sizes of fork caps

RAM MOUNT 4.25" H x 1.18" W Tough-Claw, Black, Powder-Coated, made in the usa, Aluminum, minimum width 2.25", size of bar 1 1/2", 1 1/4", 1", 1/2", 3/4", 7/8", Universal, Mounting Accessory

• The perfect mounting base for quick and easy tool-less installation and removal on round, square, odd-shaped rails and bars
• High-strength glass-filled nylon construction with corrosion resistant stainless steel hardware
• Rubber pads provide stable, even gripping and protection of mounting surface
• PART #0636-0011 can be clamped on rails from 0.625" to 1.5" outer diameter
• PART #0636-0012 can be clamped on rails from 1" to 2.25" outer diameter
• Ideal for mounting tablets, action cameras, smartphones and much more in a wide variety of applications
• Perfectly suited for mounting on the handlebars, racks and roll cages
• Made in the U.S.A.

RAM MOUNT 6" H x 2.25" W Tough-Claw, Black, Powder-Coated, made in the usa, Aluminum, size of bar 1 1/2", 1 1/4", 1", 1/2", 3/4", 7/8", Universal, Mounting Accessory

• The perfect mounting base for quick and easy tool-less installation and removal on round, square, odd-shaped rails and bars
• High-strength glass-filled nylon construction with corrosion resistant stainless steel hardware
• Rubber pads provide stable, even gripping and protection of mounting surface
• PART #0636-0011 can be clamped on rails from 0.625" to 1.5" outer diameter
• PART #0636-0012 can be clamped on rails from 1" to 2.25" outer diameter
• Ideal for mounting tablets, action cameras, smartphones and much more in a wide variety of applications
• Perfectly suited for mounting on the handlebars, racks and roll cages
• Made in the U.S.A.

RAM MOUNT Ram Mount Motorcycle Fork Stem Base With 1" Ball, Black, made in the usa, Aluminum, Ball-Mount

• Cleanest way to mount small electronics on your motorcycle
• Slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit
• Designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from .5"-1.10"
• Powder-coated marine-grade aluminum

NOTE: Certain motorcycles require adding electrical tape to the area of the plug that has the largest diameter until it fits snugly in the stem.

RAM MOUNT RAM Mounting System Base With 11mm Hole, Black, Powder-Coated, made in the usa, Aluminum, Universal, Mounting Accessory

• Marine-grade aluminum with a black powder-coat finish, unless noted
• 1" rubber ball
• Mirror post base fits any open mirror mount hole on motorcycles with relocated mirrors
• Mounting hardware included

RAM MOUNT RAM Mounting System Base With 9mm Hole, Black, Powder-Coated, made in the usa, Aluminum, Universal, Mounting Accessory

• Marine-grade aluminum with a black powder-coat finish, unless noted
• 1" rubber ball
• Mirror post base fits any open mirror mount hole on motorcycles with relocated mirrors
• Mounting hardware included

RAM MOUNT RAM Mounting System Handlebar Clamp, Black, Powder-Coated, made in the usa, Aluminum, Universal, Mounting Accessory

• Marine-grade aluminum with a black powder-coat finish
• 1" rubber ball
• Mirror post base fits any open mirror mount hole on motorcycles with relocated mirrors
• Mounting hardware included

RAM MOUNT Rectangle Ram Mount Motorcycle Brake/Clutch Reservoir Cover Base, Black, Powder-Coated, made in the usa, Aluminum, Universal, Mounting Accessory

• Fits cleanly over your existing reservoir cover with the 1" ball centered
• Made of die-cast aluminum with an over-molded rubber ball
• Easy installation
• Each kit includes black oxide SM420 screws (M4 x 20mm hex drive stainless steel machine screw), black oxide SM430 screws (M4 x 30mm hex drive stainless steel machine screw) and black oxide SM435 screws (M4 x 35mm hex stainless steel machine screw)
• Powder-coated marine-grade aluminum