All

COMETIC Extreme Sealing Technology (EST) Top End Gasket Set, Rubber, Stainless Steel, bore size 3 1/2", Each, specific application, thickness .030", Harley 84-91 FX 84-91 FL 87 - 91 XL

• EST (Extreme Sealing Technology) gasket kits include embossed stainless steel head, base and rocker gaskets covered with a proprietary rubber material
• Head gasket material allows heat to be drawn away from the combustion ring and dissipated evenly across the gasket surface to eliminate hot spots and gasket failure
• Sets contain all the necessary gaskets, seals and O-rings to rebuild the top end from the cylinder base upward
• Made in the U.S.A.

COMETIC Extreme Sealing Technology (EST) Top End Gasket Set, Rubber, Stainless Steel, bore size 3 1/2", Each, specific application, thickness .030", Harley 91 - 03 XL

• EST (Extreme Sealing Technology) gasket kits include embossed stainless steel head, base and rocker gaskets covered with a proprietary rubber material
• Head gasket material allows heat to be drawn away from the combustion ring and dissipated evenly across the gasket surface to eliminate hot spots and gasket failure
• Sets contain all the necessary gaskets, seals and O-rings to rebuild the top end from the cylinder base upward
• Made in the U.S.A.

COMETIC Extreme Sealing Technology (EST) Top End Gasket Set, Rubber, Stainless Steel, bore size 3 3/4", Each, specific application, Harley 05-16 FX 05-16 FL

• EST (Extreme Sealing Technology) gasket kits include embossed stainless steel head, base and rocker gaskets covered with a proprietary rubber material
• Head gasket material allows heat to be drawn away from the combustion ring and dissipated evenly across the gasket surface to eliminate hot spots and gasket failure
• Sets contain all the necessary gaskets, seals and O-rings to rebuild the top end from the cylinder base upward
• Made in the U.S.A.

COMETIC Extreme Sealing Technology (EST) Top End Gasket Set, Rubber, Stainless Steel, bore size 3 3/4", specific application, thickness .030", Harley 99-04 FX 99-04 FL

• EST (Extreme Sealing Technology) gasket kits include embossed stainless steel head, base and rocker gaskets covered with a proprietary rubber material
• Head gasket material allows heat to be drawn away from the combustion ring and dissipated evenly across the gasket surface to eliminate hot spots and gasket failure
• Sets contain all the necessary gaskets, seals and O-rings to rebuild the top end from the cylinder base upward
• Made in the U.S.A.

COMETIC Extreme Sealing Technology (EST) Top End Gasket Set, Rubber, Stainless Steel, bore size 4.125", Each, Harley 99-16 FX 99-16 FL

• EST (Extreme Sealing Technology) gasket kits include embossed stainless steel head, base and rocker gaskets covered with a proprietary rubber material
• Head gasket material allows heat to be drawn away from the combustion ring and dissipated evenly across the gasket surface to eliminate hot spots and gasket failure
• Sets contain all the necessary gaskets, seals and O-rings to rebuild the top end from the cylinder base upward
• Made in the U.S.A.

COMETIC Extreme Sealing Technology (EST) Top End Gasket Set, Rubber, Stainless Steel, bore size 4.125", Each, Harley 99-16 FX 99-16 FL

• EST (Extreme Sealing Technology) gasket kits include embossed stainless steel head, base and rocker gaskets covered with a proprietary rubber material
• Head gasket material allows heat to be drawn away from the combustion ring and dissipated evenly across the gasket surface to eliminate hot spots and gasket failure
• Sets contain all the necessary gaskets, seals and O-rings to rebuild the top end from the cylinder base upward
• Made in the U.S.A.

COMETIC Extreme Sealing Technology (EST) Top End Gasket Set, Without Rubber Rocker Box Gaskets., bore size 3 1/2", Each, specific application, Harley 92-00 FX 92-99 FL 92 - 94 XL

• EST (Extreme Sealing Technology) gasket kits include embossed stainless steel head, base and rocker gaskets covered with a proprietary rubber material
• Head gasket material allows heat to be drawn away from the combustion ring and dissipated evenly across the gasket surface to eliminate hot spots and gasket failure
• Sets contain all the necessary gaskets, seals and O-rings to rebuild the top end from the cylinder base upward
• Made in the U.S.A.

COMETIC Extreme Sealing Technology Complete Gasket Kit, Aluminum, Rubber, Steel, Viton, bore size 3.937", thickness .030", Harley 99-06 FX 99-06 FL

• Every gasket in these kits uses the best materials possible for its intended application
• Multi-Layer Steel (MLS) head gaskets
• Steel Viton-coated base gaskets
• Blue Viton valve stem seals
• Aluminum Foam Material (AFM) race-style exhaust gaskets
• Complete kits include motor gasket kit plus primary, derby and inspection cover gaskets
• Made in the U.S.A.

COMETIC Extreme Sealing Technology Complete Gasket Kit, Aluminum, Rubber, Steel, Viton, bore size 4.060", Harley 06-16 FX 12-16 FL

• Every gasket in these kits uses the best materials possible for its intended application
• Multi-Layer Steel (MLS) head gaskets
• Steel Viton-coated base gaskets
• Blue Viton valve stem seals
• Aluminum Foam Material (AFM) race-style exhaust gaskets
• Complete kits include motor gasket kit plus primary, derby and inspection cover gaskets
• Made in the U.S.A.

COMETIC Extreme Sealing Technology Motor Gasket Kit, thickness .040", Harley 99-06 FX 99-06 FL

• Every gasket in these kits uses the best materials possible for its intended application
• Multi-Layer Steel (MLS) head gaskets
• Steel Viton-coated base gaskets
• Blue Viton valve stem seals
• Aluminum Foam Material (AFM) race-style exhaust gaskets
• Complete kits include motor gasket kit plus primary, derby and inspection cover gaskets
• Made in the U.S.A.

COMETIC Footpeg Stud Gasket, 10-Pack, Harley 77 - 90 XL

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

COMETIC GASKET EXHAUST Suzuki, made in the usa, Set, specific application, Exhaust Gasket

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC GASKET HEAD GSXR 73MM, made in the usa, EST, Each, thickness .018", Head Gasket

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC GASKET HEAD ZX10R 76MM, 998cc, made in the usa, EST, Each, thickness .018", Head Gasket

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC Head Gasket, bore size 60.5mm, 60mm, made in the usa, CFM-20, specific application, thickness .043"

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC HEAD GASKET, bore size 68mm, made in the usa, specific application, thickness .027"

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC Head Gasket, bore size 68mm, made in the usa, specific application, thickness .027"

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC Head Gasket, bore size 70mm, made in the usa, specific application, thickness .018"

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC Head Gasket, bore size 72mm, made in the usa, Fiber, specific application, thickness .043"

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC HEAD GASKET, bore size 73mm, made in the usa, specific application, thickness .030"

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC Head Gasket, bore size 75mm, made in the usa, specific application, thickness .018"

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC Head Gasket, bore size 81mm, made in the usa, specific application, thickness .030"

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC HEAD GASKET, bore size 84mm, made in the usa, specific application, thickness .030"

• Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
• Materials may vary depending on what is correct and engineered for specified application
• Each PART # contains the proper amount of gaskets for one application
• Made in the U.S.A.

HEAD AND BASE GASKETS

• Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
• Sold each
• Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
• Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
• MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power

LOWER END KITS

• Contains all gaskets and seals needed

STATOR AND CLUTCH COVER GASKETS

• AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
• Made from AFM material for longevity
• No gasket sealants or silicon bead is required, re-torque is also not required
• Sold each

VALVE COVER GASKETS

• Made from AFM or thick fiber material depending on application
• Sold each

EXHAUST GASKETS

• Sold as a set per application
• Exhaust gaskets are made for extreme temperatures

COMETIC Head Gasket, Rubber, Steel, bore size 3", Pair, specific application, thickness .040", Harley 86 - 07 XL

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

COMETIC Head Gasket, Steel, Viton, bore size 3 3/4", 2-Pack, thickness .051", Harley 99-13 FX 99-13 FL

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

COMETIC Head Gasket, Steel, Viton, bore size 3.875", 2-Pack, specific application, thickness .040", Harley 84-00 FX 84-99 FL 87 - 94 XL

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.