Best selling products

V-Twin Manufacturing 3-8 Chrome Smooth Hose End, 6 Peice - Pack

The smooth 3/8" Econo seal hose end acts as a clamp and finished end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end.

Custom application for 3/8" fuel line

V-Twin Manufacturing Oil Line-Wire Guide, Chrome, holds (3) 3-8 lines - Sold Each

Oil line guide wire chrome holds 3, 3/8" lines. Tie wraps may be used in conjunction with hose guide for installation. Tie wraps are not included.

Custom application

V-Twin Manufacturing Chrome Econo End,13-16" Id - Set

This 13/16" inner diameter Econo seal hose end acts as a clamp and finished end for stainless jacketed rubber hose. A micro clamp is hidden under the chrome end.

Custom application for 13/16" fuel line

V-Twin Manufacturing Pair,Chrome Econo Seal Hose End (3-8) - Set

This hex, 5/8" Econo seal hose end acts as a clamp and finished end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end. Fits 5/8" outer diameter hose.

Custom application for 3/8" fu

V-Twin Manufacturing 3-8" Oil Chrome Metal Hose Cover - Sold Each

This chrome hose cover fits over a 3/8" oil line, 3' long and has a flexible spring loaded covering. It is easy to install
To install, cut to the same length as hose. Hose cover will compress under tension to allow installation of the hose clamps fo

V-Twin Manufacturing 1-4" Fuel Chrome Metal Hose Cover - Sold Each

This chrome hose cover fits over a 1/4" fuel line is 3' long and has a flexible spring loaded covering. It is easy to install.
To install, cut to the same length as hose. Hose cover will compress under tension to allow installation of the hose clamp

V-Twin Manufacturing 3-8" Chrome Hose Ends (6) - Pack

This hex, 3/8" Econo seal hose end acts as a clamp and finished end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end.

Custom application

V-Twin Manufacturing 1-4" Chrome Hose Ends (6) - Pack

This 1/4" hex Econo seal hose end acts as a clamp and finish end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end.

All models

V-Twin Manufacturing Braided Stainless Hose 3-8" x 10' - Sold Each

This braided, stainless steel, non reinforced hose is 3/8" x 10', and can be cut to length as needed. Be sure to use Econo seal ends, or hose clamps to attach to fitting.
*WARNING: Not for use in brake systems

Custom application

Measurement

V-Twin Manufacturing 1966-1984 Motorcycle "T" Rocker Box Line Kit - Sold Each

Chrome rocker box line kit includes "T" to oil the heads.

FL 1966-1984
FX 1971-1984
FLT 1979-1983
FXR 1982-1983

V-Twin Manufacturing Braided SS Hose, 5-16" x 5' Length - Sold Each

This braided, stainless steel, non reinforced hose is 5/16" x 5', and can be cut to length as needed. Be sure to use Econo seal ends, or hose clamps to attach to fitting.
*WARNING: Not for use in brake systems.

All models

V-Twin Manufacturing Motorshop Brand Filter Six PK, 3.75'' long, 1984-99 ST - Pack

These chrome oil filters are 3" outer diameter x 3-3/4" long . They are packed six to a box and are individually wrapped and numbered.
This oil filter consist of resin impregnated paper which removes harmful particles from the oil. Metal end caps an

V-Twin Manufacturing Motorshop Brand Filter Six PK, 2.5'' long, 1982-84 FL-FX - Pack

These Motor Shop brand chrome oil filters are packed six to a box, are 3" outer diameter x 2-1/2" long and are individually wrapped and numbered.

OEM: 63782-80T

FL 1982-1984
FX 1982-1984

Measurements:

Body Length: 2-1/2"

V-Twin Manufacturing Motorcycle Oil Dipstick with Maltese fits 1970-1984 - Sold Each
Motorcycle Oil Dipstick with Maltese Dipstick 4-1/4" with Maltese design Fits: FL 1965-1984 FX 1971-1984 XL 1970-1978 UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing 1966-1984 Motorcycle Rocker Box Oil Line Set - Kit

Sifton, chrome rocker box oil line set for Shovelhead models includes fittings and seals, and features an updated fitting design for ease of installation.

FL 1966-1984
FX 1971-1984
FLT 1979-1983
FXR 1982-1983

V-Twin Manufacturing Motorcycle Replica 'Y' Oil Line Kit, FL 1963-1965 - Kit

Replica steel 'Y' line oil kit includes elbow and fittings for Panhead engines.
Kit is for use on stock 1963-1965 heads, or on STD heads for outside oiling. Timing cover must be drilled for oil feed to this line.

FL 1963-1965

V-Twin Manufacturing Oil Filter Housing, Kit, Chrome Housing w lines, 1992-99 Big Twin - Kit

Oil filter kit with chrome housing, lines, oil filter, and hardware. It has a 3/8" National Pipe Thread fitting.
Filter bolts to right front side of engine.

FXST 1992-1999
FLST 1992-1999

V-Twin Manufacturing Drop In Oil Filter XL - Sold Each

Our V-Twin drop in oil filter includes spring, o-ring and a once piece filter.
This oil filter carries the stringent TUV and ISO certifications. The finest materials from around the world go into each filter such as Japanese steel and German glues a

V-Twin Manufacturing Banjo Bolt Washer,Feed - Pack

Washer is for feed oil line banjo fitting bolt.

OEM: 3570-36B

G 1936-1973
WL 1936-1952

Measurements:

Front Width: 4"
Rear Width: 13-3/4"
Pad Thickness: 1"
Length: 16"

V-Twin Manufacturing Cadmium, Feed Oil Line, 1938-48 - Sold Each

Cadmium Feed Oil Line

OEM: 3571-38

UL 1938-1948

V-Twin Manufacturing Motorcycle Rocker Box Oil Line Set, 1966-1984 - Kit

Chrome oil line set for stroker Shovelhead rocker boxes includes fittings and seals, and features an updated fitting design for ease of installation.
Oil line is 9-1/2" long.

FL 1966-1984
FX 1971-1984
FLT 1979-1983
FXR 1982-1983

V-Twin Manufacturing Motorcycle Replica 'Y' Oil Line Elbow, FL 1963-1965, 63542-63 - Sold Each

Replica brass Panhead 'Y' oil line elbow for use on outside oiling.

OEM: 63542-63

FL 1963-1965

V-Twin Manufacturing Rocker Box Oil Line Set, 1966-1984 - PR

Zinc oil line set for Shovelhead rocker boxes includes fittings and seals.

FL 1966-1984
FX 1971-1984
FLT 1979-1983
FXR 1982-1983

V-Twin Manufacturing Motorcycle Fuel-Oil Hose, reinforced, black fuel oil hose comes in a 1/2" x 25' - FT

This reinforced, black fuel oil hose comes in a 1/2" x 25' shop roll.

OEM: 63553-91

All models

V-Twin Manufacturing Oil Filter, Upper + Lower Seals (A+C), 1965-81 FL, 1971-81 FX XL - Kit

Oil filter kit with upper seal kit and lower seals

OEM: 63881-67

FL 1965-1981
XLH 1957-1981
FX 1971-1981

V-Twin Manufacturing Oil Filter Retainer Washer (C), 1965-81 FL, 1971-81 FX XL - Pack

Lower retainer for filter elements

OEM: 63846-67

FL 1965-1981
FX 1971-1981
XLH 1957-1978

V-Twin Manufacturing Breather Pipe, Chrome, 1954-82 XL - Sold Each

Chrome breather pipe with fitting nut.
The pipe opens into a container for ventilation. Breather pipe is manufactured to meet OEM specifications for long lasting durability and performance.
OEM: 24912-52A

XLH 1957-1978
XLCH 1957-1978

V-Twin Manufacturing Fuel-Oil Line, Black, 3-8" x 25Ft Roll - Sold Each

This reinforced, black Thermoid brand fuel-oil hose comes in a 3/8" x 25' shop roll.

OEM: 63500-68

All models

V-Twin Manufacturing Black Fuel, Oil Line 25 Ft. 5-16 82-E87 Big Twin - Sold Each

This reinforced, black Thermoid brand fuel-oil hose comes in a 5/16" x 25' shop roll.

OEM: 63573-82

All models

V-Twin Manufacturing Black Fuel, Oil Line - Sold Each

This reinforced, black Thermoid brand fuel-oil hose comes in a 1/4" x 25' shop roll.

All models

V-Twin Manufacturing Black Fuel, Oil Line - Sold Each

This reinforced, black Thermoid brand fuel-oil hose comes in a 3/16" x 25' shop roll.

OEM: -68

All models

V-Twin Manufacturing Chrome Oil Line, 1957-70 Magneto XL - Kit

Chrome oil line set for rocker boxes which include fittings and seals.

OEM: 17324-58

XL 1957-1970 Magneto

V-Twin Manufacturing Chrome Oil Line, 1957-84 XL - Kit

Chrome oil line set for rocker boxes which include fittings and seals.

XL 1957-1984