Best selling products

V-Twin Manufacturing Billet Mini Floor Board Set - Set

Chrome billet mini footboard set is used to replace passenger pegs with a male clevis mount.
Set is a 3-pad style and can be installed on engine guards with appropriate clamps.

Custom application to replace passenger pegs with male clevis mou

V-Twin Manufacturing 06-Up FXD Upper Belt Guard

- Sold Each

Shorty upper belt guard with slot design for 70 tooth rear pulley.

OEM: 60322-04

FXD 2006-UP

To read a Review

V-Twin Manufacturing Chrome Lower Belt Guard 2006 FLST-FXST - Sold Each

Lower belt guard for 70 tooth rear pulley and 1" belt.

OEM: 60317-06

FXST 2006-2006
FXSTB 2006-2006
FXSTS 2006-2006

V-Twin Manufacturing Chrome Rear Belt Guard Lower fits FXD 2007-UP,60514-07A - Sold Each
Chrome Rear Belt Guard Lower OEM No: 60514-07A Lower belt guard for 70 tooth rear pulley. This covers the existing original plastic lower belt guard. Fits Harley-Davidson models: FXD 2007-UP UOM: 1 - EA

V-Twin Manufacturing Batique Style Motorcycle Footpeg Kit - Kit
Batique Style Motorcycle Footpeg Kit Male end mount footpeg set features batique style peg with matching shifter peg to fit forward controls. Fits: All models with female mounting block UOM: 1 - KIT Country of Or

V-Twin Manufacturing Chrome Belt Guard Kit for 70 tooth pulley fits FXD 1991-1999 - Kit
Chrome Belt Guard Kit Includes cover for 70 tooth pulley and upper and lower belt guard Fits: FXD 1991-1999 UOM: 1 - KIT Country of Origin: Imported

V-Twin Manufacturing 3-Piece Swiss Peg Set - Kit

Male end mount footpeg set features hole shot style peg with matching shifter peg to fit forward controls.

All models with female mounting block

V-Twin Manufacturing 3-Piece Druid Peg Set - Kit

Male end mount footpeg set features druid style pegs with matching shifter peg to fit forward controls.

All models with female mounting block

V-Twin Manufacturing Wyatt Gatling Big Twin Kickstand Assembly - Sold Each

Big Twin kickstand assembly features an adjustable leg and hidden spring. Kickstand has a range of 9" to 9-1/2".
Mounting is by 3 bolts on the left side front frame boss.

FXST 1984-1999

V-Twin Manufacturing Adjustable Driver's Mini-Footboard Kit - Kit

Made of stamped steel, these chrome mini driver or passenger footboard kit is adjustable and includes male yokes.
These fit into existing female clevis on forward controls or pedal peg mounts. The floorboards measure 7-1/4" x 3-1/2".

Custom a

V-Twin Manufacturing Bullet Billet Peg Set - PR

Male end mount footpegs features bullet shaped pegs in a chrome finish with rubber buttons on the foot surface.

All models with female mounting block

V-Twin Manufacturing Billet Engine Bar Footpeg Mount, Chrome - Kit

Chrome billet engine bar footpeg mount kit fits 1-1/4" engine bars. Includes cats paw footpegs.

Custom application for use on 1-1/4" engine bar for male pegs

V-Twin Manufacturing Billet Engine Bar Footpeg Mount, Chrome - PR
OEM No: 50957-02 Two-piece chrome billet engine bar footpeg mount Kit is manufactured from CNC machined billet aluminum and includes bolt, lock washer, and locknut. The clamps mount directly on your 1-1/4" engine guard or frame. This mount kit w

V-Twin Manufacturing Clutch Booster Bracket U-Bolt, Chrome - Kit
OEM No: 38460-52 Chrome U-bolt includes nuts and washers. Fits: FL 1952-1967 FLH 1952-1967 UOM: 1 - KIT Country of Origin: USA

V-Twin Manufacturing 1982-90 XL Chrome Rear Peg Bracket - Sold Each

Chrome passenger footpeg bracket bolts to rear motor mount bolts, for use on rigid or swingarm frames.

OEM: 52709-82

XL 1982-1990

Tech Note:

Suggested to use with #27-1227 small male pegs

V-Twin Manufacturing 57-78XL Rear Footpeg Bracket Chrome XL - Sold Each

Chrome passenger footpeg bracket bolts to rear motor mount bolts, for use on rigid or swingarm frames.
Uses large female driver footpegs.

XL 1957-1978

Measurements:

Bracket Length: 5-3/4"
Bracket Width: 14"
Mount Width: 13-1

V-Twin Manufacturing BT-Chrome,Rigid Rear Footpeg Mount Bracket - Sold Each

Chrome passenger footpeg mount bracket bolts to 4-speed transmission plate or can be mounted behind transmission on rigid frames by fabrication of mount strap.

Custom application for rigid frames

V-Twin Manufacturing 1986-up FLST Mustache Hiway Bars w-Peg - Kit

Chrome mustache highway bar kit with cats paw foot pegs.
These bars are not to be used with a front engine bar.

FLST 1986-UP
FXST 1984-UP

V-Twin Manufacturing Rear Passenger Peg Mount Set, 96-up - Set

Chrome passenger mount block set for use with male peg with a 3/8" - 16" stud.

FLT 1993-UP

V-Twin Manufacturing Knuckle Billet Peg Set - Set

Male end mount knuckle footpeg set in a chrome finish.

All models with female mounting block

V-Twin Manufacturing 1973-1984 FLH-Rear Floorboard Kit Includes Brackets chrome boards - Kit

Passenger footboard kit includes brackets and chrome boards with rubber inserts.

FL 1973-1984

V-Twin Manufacturing Offset Peg Mount Kit, Chrome - Kit

Chrome footpeg mount set is 2" offset with a 3" extension. Set accepts 1/2"-13 bolts. Use with 3 piece clamp set for 360, rotation.

Custom application utilizes a 1/2" mounting hole

V-Twin Manufacturing Passenger Pegs (Male) Match 22-0755 Kit - Set

Features male end mount peg with a rubber inlay insert in chrome body of peg and shaft.

All models with female mounting block

V-Twin Manufacturing 86-03 XL Highway Bar Assembly - Kit

Chrome highway bar kit mounts to front motor mount. Includes extension bars and o-ring footpegs.

OEM: 49106-84

XL 1986-2003

V-Twin Manufacturing Primary Footboard Mounting Kit, Aluminum, FLH-FXE, BT 1965-84 - Kit

Aluminum primary footboard mounting kit includes hardware and extended rear footboard bracket for use with custom drag or muffler pipes.
Kit is for models with FL type forward controls and primary cover with footboard tab.

FL 1965-1984
FXE

V-Twin Manufacturing Floorboard Mount Bracket Kit 36-64, Chrome BT 5 pk. - Set

Chrome footboard mount bracket kit includes both brackets for mechanical or hydraulic brake models.
Order footboard bracket mount, hinge hardware kit and footboard stud nut and washer kit separately.
OEM: 50658-36

EL 1936-1940
FL 1941-1

V-Twin Manufacturing Batique Billet Peg Set With Male Ends, 6 - Set

Male end mount batique style footpeg set in billet chrome. Measures 6" in length.

All models with female mounting block

Measurements:

Length: 6"
Thickness: 0.545"

V-Twin Manufacturing Folding Billet Peg Set, Batique Style, 8.5 - Set

Stud mount footpeg set with 3/8" x 16 mount hole is batique style and features 3" clevis for use on Wyatt Gatling forward controls.

All with 3/8" x 16 mount hole

Tech Note:

Order #21-0540 shifter peg

V-Twin Manufacturing 45 Floorboard Bracket Set 29-73 Black 4Pc - Set

Black footboard bracket set, 4 piece

WL 1929-1952
G 1933-1973

V-Twin Manufacturing Floorboard Mounting Kit,65-84 Big Twin - Kit

Chrome footboard mount kit includes an extended front footboard bracket for needed clearance when using custom drag pipes.
This mount kit is used on 1965-1984 FL and FX models when using custom pipes, and for 1970-1984 FLH models with drag pipes.

V-Twin Manufacturing Replica 1936-57 Ks Mount Bracket - Sold Each

Replica parkerized kickstand mount bracket is without the two holes in the face of the bracket.

OEM: 50046-36

FL 1958-1984
FX 1971-1984

V-Twin Manufacturing Floorboard Rivets 1914-1965, 50616-14 - Pack

Black steel rivets to affix footboard mats comes in pack of 28 pieces.

OEM: 50616-14

J 1914-1921
EL 1936-1940
WL 1929-1952
FL 1941-1965
G 1959-1965

V-Twin Manufacturing +2" Ext. Fwd Control Mount 36-99 BT - Set

Alloy 2" forward control extension bracket will relocate stock or custom controls 2" forward on Big Twin models.
Note that the hoses and linkage will also have to be extended.

Custom application

Measurements:

Thickness: .759"

V-Twin Manufacturing FXD 1"Lower Kick Stand 90-up - Sold Each

Chrome jiffy kickstand leg is 1" lower than stock. Steel kickstand is ideal for lowered bikes.
Order spring and hardware separately.

FXD 1991-2005

V-Twin Manufacturing Railer Style Footpeg Set Chrome fits All models with 1-1/4" engine bars - Set

Clamp on footpeg set features molded rubber inserts in a chrome die cast metal peg. Set includes billet clamps.
Pegs have a flattened surface of 4" x 2" for more comfort and mount to a 1-1/4" engine bar.

All models with 1-1/4" engine bar