Best selling products

Inner sleeve is for the swingarm kit with the spherical bearing. 0-Special application

This complete 5 piece parkerized rear axle sleeve kit includes the sleeve sleeve nut 5/8 hex nut sleeve collar and spring lock plate. For use on rigid frame with mechanical brakes fitted to star hub wheels in parkerized finish. 1941-1957 FL 1937-1952 EL

Axle with hex head and a threaded end has a 12 bearing surface length. This can be used to replace a worn out or damaged axle for swingarm frames. 1984-1999 FXST application for swing arm frames 1973-1984 FX application for swing arm frames

Cone nut for use with cone front hub axle sleeve. *NOTE: Nut accepts felt seal washer. 1944-1952 W

Chrome front axle spacer has an inner diameter of 3/4 and an overall length is .560 long. 1986-1999 FLST

This flush mount front axle kit is a new way to dress up your front wheel without the hex nut and lug sticking out. The kit includes two chrome washers and two chrome flat head screws. 2008-UP FLT

This flush mount front axle kit is a new way to dress up your front wheel without the hex nut and lug sticking out. The kit includes two chrome washers and two chrome flat head screws. 2000-2007 FLT

45 front wheel hub grease distributor tube. 1943-1952 W

45 W wheel hub kit includes all parts required for assembly of a bare hub. Internal hub races not included. 1936-1952 W

Replacement wheel bearing for 25mm axle. For use on ABS and non ABS models. ABS models require one ABS bearing and one non ABS bearing. Designed for bikes with stock diameter or larger than stock diameter wheels. Bearings for larger than stock diameter wheels have a greater reinforced magnetic area that will not set off any engine codes after proper installation. Custom Application

Replacement wheel bearing for 25mm axle. For use on ABS and non ABS models. ABS models require one ABS bearing and one non ABS bearing. Designed for bikes with stock diameter or larger than stock diameter wheels. Bearings for larger than stock diameter wheels have a greater reinforced magnetic area that will not set off any engine codes after proper installation. Custom Application

Replacement wheel bearing for 25mm axle. For use on ABS and non ABS models. ABS models require one ABS bearing and one non ABS bearing. Designed for bikes with stock diameter or larger than stock diameter wheels. Bearings for larger than stock diameter wheels have a greater reinforced magnetic area that will not set off any engine codes after proper installation. Custom Application

Replacement wheel bearing for 25mm axle. For use on ABS and non ABS models. Designed for bikes with stock diameter. *NOTE: Without note encoder. 2007-UP FXST Front with or without ABS 2007-UP FLST Front with or without ABS 2007-UP FLSTF Front with or without ABS 2007-UP FXSTB Front with or without ABS 2007-UP FXSTD Front with or without ABS 2007-UP FLSTN Front with or without ABS 2007-UP FXSTC Front with or without ABS 2008-UP FXST Rear with or without ABS 2008-UP FLST Rear with or without ABS 2008-UP FLSTC Rear with or without ABS 2008-UP FLSTN Rear with or without ABS 2008-UP FXSTB Rear with or without ABS 2008-UP FXSTC Rear with or without ABS 2008-UP FLSTFB Rear with or without ABS 2008-UP FLSTF Rear with or without ABS 2008-2017 FXD Front with or without ABS 2008-UP FLT Rear with or without ABS 2008-UP XL Front and Rear with or without ABS 2008-UP VRSC Front and Rear with or without ABS 2007-UP FLH

VL wheel hub kit includes a parkerized hub bearing assembly lock ring collar and lock ring tool. For use on 18 or 19 front and rear wheels. 1930-1936 VL

Hub cap adapter spacer is zinc plated steel with a bronze thrust washer and snap ring included. Spacer is for the left side. 1997-1999 FLSTS

Front hub cap adapter spacer is for left side has a zinc finish and includes a retaining ring. 1996-1999 FXSTS Left Side

Front hub cap adapter spacer has a zinc finish and includes a retaining ring. 1997-1999 FXST Left Side with 21 Wheel" 1993-1999 FXDWG Right Side with 21 wheel"

Front hub cap adapter spacer is for the right side has a zinc finish and includes a retaining ring. 2000-2006 FXST with 21 laced wheel" 2000-2006 FXDWG with 21 laced wheel" 2000-2006 FXSTS with 21 laced wheel" 2000-2006 FXSTD with 21 laced wheel"

VL wheel rebuild kit includes sealed bearing assembly and wheel hub inner and outer nut and washer. Spanner tool included. 1930-1936 VL

Chrome rear axle spacer set features 3/4 inner diameter with an overall length of 1-5/8 . Axle spacer fits right and left side on 1986-1999 Touring models. 1986-1999 FLT

Swingarm pivot kit includes pivot shaft bearings and hex cap screws. 2004-UP XL

This pivot shaft supports the rear swingarm rear motor mount bushings and is zinc plated. 2004-UP XL

25mm FLT wheel hub bearing kit is for use with ABS models. 2008-UP FLT Front or Rear

25mm FLT wheel hub bearing kit is for use with non-ABS models. 2008-UP FLT Rear

Replica rigid rear axle brake sleeve features a ground finish. 1936-1952 EL 1941-1957 FL

Axle kit chrome has an outer diameter of 25mm and fits 2007- up FXSTD. 2007-2017 FXSTD

Chrome rear axle spacer set is for both right and left sides of the axle. 2000-2007 FXST

Chrome front axle spacer set is for 2007-up FXST. Spacer measures 1 inner diameter x 7/8 long. 2007-2015 FLST 2007-2010 FXST

Rear axle spacer set is chrome and fits 2004-2007 XL. 2004-2007 XL

Front hub cap adapter spacer is for the right side has a zinc finish and includes retaining ring. 1986-1999 FLST

FLT rear axle features a 25mm outer diameter and a zinc finish 2014-UP FLT

Rigid rear axle features a parkerized finish. 1936-1952 EL 1941-1957 FL

Chrome rear axle kit with a 25mm outer diameter includes an axle spacer and nut. 2008-UP XL