Cobra Motorcycle Exhaust Systems

• Display the clean look of a true-dual system, but pack the performance to back it up; because of the Cobra PowerPort crossover, this system performs like a 2-into-1 exhaust
• The PowerPort Dual head pipes fatten the low-end and mid-range torque curve, perfect for touring and highway use
• The head pipes arrive with the proper bends built in so there is no need to use adapters (all other aftermarket head pipes require S adapters to connect the head pipes to the mufflers - stock or aftermarket)
• The system consists of the head pipes, PowerPort section, heat shields and all of the mounting hardware needed to complete the installation
• 1.75" diameter
• Mufflers not included; accept OEM mufflers or 95-16 OEM-style mufflers
• Made in the U.S.A.

• Dual headpipes taken to a whole new level
• PowerPort crossover provides power boost across entire rpm range
• Dual pipe styling with 2-into-1 performance
• Dual bung headpipes feature 12mm and 18mm bungs for easier tuning set up and include installed 18mm bung plugs with copper sealing washers (09 models will require 12mm bung plugs (sold separately))
• 2.5" heat shields
• Quick, simple installation
• Accept any 95-16 OEM-style mufflers
• Made in the U.S.A.

COBRA Chrome True Dual Header System, Harley 07-08 FL

• Feature one-piece, full length, 2.5-inch-diameter heat shields
• Cobra designed these pipes to deliver optimal torque and power while increasing the stock bike’s rideability
• Includes head pipes and heat shields and all the mounting hardware required
• Does not include mufflers
• 1.75-inch diameter ensures the stock mufflers and most aftermarket mufflers will fit
• Includes oxygen sensor bungs
  

• Feature individual 13/4" headpipes for increased exhaust flow
• 2.5" one-piece heat shields provide proportionality and seamless, unbroken flow to traditionally styled V-Twins
• Accept Cobra slip-on mufflers or any 95-15 OEM-style mufflers

• PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
• PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
• Large 2.5", 222, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
• Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
• Includes mounting hardware and removable baffles for simple installation
• Power with social responsibility
• Made in the U.S.A.

• PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
• PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
• Large 2.5", 222, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
• Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
• Includes mounting hardware and removable baffles for simple installation
• Power with social responsibility
• Made in the U.S.A.

• PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
• PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
• Large 2.5", 222, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
• The Short Swept system is a shortened version of Cobra's successful Swept Speedster line of exhausts, but in a shorter, more radical design
• Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
• Includes mounting hardware and removable baffles for simple installation
• Power with social responsibility
• Made in the U.S.A.

• PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
• PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
• Large 2.5", 222, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
• The Short Swept system is a shortened version of Cobra's successful Swept Speedster line of exhausts, but in a shorter, more radical design
• Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
• Includes mounting hardware and removable baffles for simple installation
• Power with social responsibility
• Made in the U.S.A.

• Provides a classic dual-exit look while increasing performance
• 13/4" exhaust tubing provides improved exhaust flow; rear head pipe is not flattened to clear the coil bracket
• Removable louvered baffles increase back pressure and torque
• New coil-mounting bracket increases clearance for the tightly curved rear headpipe on 07-newer models
• 21/2" heat shield gives the classic straight pipe look
• Available with 21/2" billet tips or a classic chromed steel fishtail-style tip
• Billet-tip style lines up with the rear fender
• Fishtail-style tip sticks out 6" further than the standard billet tip for a more custom look
• 07-16 styles accept 12mm and 18mm O sensors
• Made in the U.S.A.

• Provides a classic dual-exit look while increasing performance
• 13/4" exhaust tubing provides improved exhaust flow; rear head pipe is not flattened to clear the coil bracket
• Removable louvered baffles increase back pressure and torque
• New coil-mounting bracket increases clearance for the tightly curved rear headpipe on 07-newer models
• 21/2" heat shield gives the classic straight pipe look
• Available with 21/2" billet tips or a classic chromed steel fishtail-style tip
• Billet-tip style lines up with the rear fender
• Fishtail-style tip sticks out 6" further than the standard billet tip for a more custom look
• 07-16 styles accept 12mm and 18mm O sensors
• Made in the U.S.A.

• Provides a classic dual-exit look while increasing performance
• 13/4" exhaust tubing provides improved exhaust flow; rear head pipe is not flattened to clear the coil bracket
• Removable louvered baffles increase back pressure and torque
• New coil-mounting bracket increases clearance for the tightly curved rear headpipe on 07-newer models
• 21/2" heat shield gives the classic straight pipe look
• Available with 21/2" billet tips or a classic chromed steel fishtail-style tip
• Billet-tip style lines up with the rear fender
• Fishtail-style tip sticks out 6" further than the standard billet tip for a more custom look
• 07-16 styles accept 12mm and 18mm O sensors
• Made in the U.S.A.

• PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
• PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
• Available in short style with RacePro Tips
• Large 2.5", 222, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
• Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
• Includes mounting hardware and removable baffles for simple installation
• Power with social responsibility
• Made in the U.S.A.

• PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
• PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
• Large 2.5", 222, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
• Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
• Includes mounting hardware and removable baffles for simple installation
• Power with social responsibility
• Made in the U.S.A.

• PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
• PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
• Large 2.5", 222, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
• The Short Swept system is a shortened version of Cobra's successful Swept Speedster line of exhausts, but in a shorter, more radical design
• Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
• Includes mounting hardware and removable baffles for simple installation
• Power with social responsibility
• Made in the U.S.A.

• PowerPort crossover makes for a significant power increase from just off idle to redline, which leads to a deep and aggressive exhaust tone
• PowerPort increases power and overall performance by providing superior scavenging of exhaust gases over most standard exhaust systems; similar to what you might expect from a 2-into-1 system
• Large 2.5", 222, full-length heat shields fit from the exhaust ports to the billet tips for a seamless look and no blueing
• The Short Swept system is a shortened version of Cobra's successful Swept Speedster line of exhausts, but in a shorter, more radical design
• Show-chrome or black finished heat shields with beautifully machined chrome billet end caps for a truly custom finish
• Includes mounting hardware and removable baffles for simple installation
• Power with social responsibility
• Made in the U.S.A.