Joker Machine

JOKER MACHINE Ignition Switch Relocation Bracket, Black, Anodized, made in the usa, Aluminum, specific application

• A must when using custom fork tube-mounted headlight brackets
• Mounts super-clean and up close to the frame as possible, below the left side of the tank
• Ignition switch has no exposed hardware, other than the two alloy frame bolts
• Fully CNC machined from solid 6061 T-6 aluminum, then given a black anodized finish
• Made in the U.S.A.

JOKER MACHINE Black Series 900 Headlight Brackets For Triumph Bonneville and Scrambler, Anodized, made in the usa, Pair, specific application

• Replace the sheet metal formed stock headlight arms found on Bonnevilles and Scramblers
• Fully CNC machined from 2" square x 6" long blocks of 6061 T-6 aluminum into a super lightweight arm configuration that really gives your bike a road-racer look
• Fit 41mm fork legs
• Simply slide these on and tighten the two Allen-head alloy bolts to secure into place anywhere along the leg; trim washers and Allen bolts are included
• Available with a black anodized or chrome finish
• Made in the U.S.A.

NOTE: Joker Machine recommends use of ignition switch relocation bracket PART #2106-0092 when using headlight brackets.

JOKER MACHINE Hard Black Ribbed Shift Peg, Anodized, length 2", made in the usa, Aluminum, Each, specific application

• Fully CNC-machined from 6061 T-6 billet aluminum
• Ribbed design so it won't scuff the top of the boot
• Include M8-1.25 mounting bolt for quick installation
• Overall length is 2" with 15/16" outside diameter
• Sold each
• Made in the U.S.A.

JOKER MACHINE Adjustable Serrated Shifter Pegs, Black, Anodized, made in the usa, Aluminum, Each

• Give your bike a unique design twist with these all-billet aluminum adjustable serrated footpegs
• Fully CNC machined from solid 6061 T-6 bar
• Superstrong, yet lightweight two-piece construction
• The comfortable serrated foot surface area gives you a wider area for your feet and provides a good "bite" onto the bottom of your shoe
• Full 360 footpeg rotation makes these footpegs perfect for any application
• Footpegs have Joker's exclusive pitch adjustment screw that enables you to change the angle of the peg in order to adjust it to a "level" riding position (if necessary) so the pegs don't appear to "lay down" with time, vibration, etc.
• Shift pegs have serrations on the top surface only, and the bottom side is smooth to provide non-shoe-damaging up-shifts - installs easily to shift arms with a threaded 8mm mounting hole
• Available in your choice of natural clear anodized or our hard black anodized finish
• Footpegs are available in two different lengths and fit most models with standard female footpeg mounts
• Footpegs sold in pairs; shifter pegs sold each
• Made in the U.S.A.

JOKER MACHINE COVER SPRT TRI BLACK, made in the usa, Sprocket

• Give your bike that "race-tech" appearance with one of these trick sprocket covers
• CNC-milled out of 661 T-6 billet aluminum to give you a much lighter cover than the heavy stock cast piece
• All stand-offs are CNC-machined and mounting hardware is included
• Available in your choice of black or clear anodized finishes
• Made in the U.S.A.

JOKER MACHINE Black Oil Filler Plug, Anodized, made in the usa, Aluminum, Each, specific application, Oil Filler Cap

• Give your bike's crankcase a refined race look with one of these cool oil filler plugs
• All CNC machined from 6061 T-6 aluminum
• Super-easy handle design eliminates the need for a tool (or coin) to inspect or add oil to your engine
• Holes in handle enable safety wiring access for racing applications, and add lightness to the part (not to mention a tightening point with an Allen wrench through one of the three side holes)
• Available in your choice of black or clear anodized finish or chrome finish; includes O-ring
• Made in the U.S.A.

JOKER MACHINE KNURLED GAS CAP, Black, Anodized, made in the usa, Aluminum

• Fully CNC-machined from 6061 T-6 billet aluminum
• Precision diamond knurl pattern to ensure surprisingly comfortable grip performance; adds a great custom look to your bike at the same time
• Easy installation, uses all the stock gas cap components - just remove snap ring from the old cap with snap ring pliers and install ours in seconds
• Cap measures 215/16" outside diameter and is approximately 1/2" thick
• Made in the U.S.A.

JOKER MACHINE Gas Cap, Black, Anodized, made in the usa

• Low-profile billet aluminum gas caps made with precision-machined finger serrations make it much easier to unscrew your gas cap, and add a great custom look to your bike
• Available in our precisely CNC-engraved 900 Union Jack series or smooth surface preferences - rotating the logo into the proper reading position is no problem
• Easy installation; uses all the stock gas cap components - just remove snap ring from the old cap and install ours in seconds
• Fully CNC machined from 6061 T-6 billet aluminum
• Offered in your choice of black anodized or chrome-plated finishes
• Made in the U.S.A.

JOKER MACHINE Chrome Choke Knob, made in the usa, Aluminum, Each, specific application, Replacement

• Fit Keihin CVK or CTK carburetors
• Fully CNC-machined billet construction with precision diamond knurl pattern
• Fast installation - just remove the stock black plastic unit found and screw in the Joker knob
• Include stainless steel threaded (M4 X.7MM) stud
• Will work with the new 2009 EFI - CTK "carbs" with the two-stage fast idle
• Knob measures 0.86" outside diameter, 1" in length
• Made in the U.S.A.

JOKER MACHINE Black Choke Knob, Anodized, made in the usa, Aluminum, Each, specific application, Replacement

• Fit Keihin CVK or CTK carburetors
• Fully CNC-machined billet construction with precision diamond knurl pattern
• Fast installation - just remove the stock black plastic unit found and screw in the Joker knob
• Include stainless steel threaded (M4 X.7MM) stud
• Will work with the new 2009 EFI - CTK "carbs" with the two-stage fast idle
• Knob measures 0.86" outside diameter, 1" in length
• Made in the U.S.A.

JOKER MACHINE Metric Mirror Adapter, Natural, made in the usa, Aluminum, Each, Replacement, Mirror Adapter

• 10mm metric mirror adapter enables you to mount mirrors with 5/16"-24 mounts on metric bike controls
• Super low-profile design keeps the mirror base looking clean, opposed to some aftermarket "messy" looking adapters out there on the market
• Available in a right thread 10mm on one end and threaded 5/16"-24 on the other
• Heat-treated alloy threaded stud and stainless steel jam nut included
• Installs in seconds with an Allen wrench
• You need one adapter for each mirror
• Made in the U.S.A.

JOKER MACHINE Mirror Hole Plugs, Black, Anodized, made in the usa, Aluminum, Pair, Replacement

• Flush-mounted design cleans up the look of your late-model Triumph or Joker Machine hand controls after you remove the stock mirrors
• A must when using bar-end type mirrors
• Fully CNC-machined from 6061 T-6 billet aluminum, then black anodized
• Easy installation
• Mounting hardware included
• Sold in pairs
• Made in the U.S.A.

JOKER MACHINE Triumph Mirror Adapter Bushings, Natural, Chrome, made in the usa, Aluminum, Pair, size 5/16", Replacement

• Enable you to mount Joker Machine mirrors to late-model Triumph hand controls
• Fully CNC-machined from 6061 T-6 billet aluminum
• Easy installation - simply press in by hand and mount the mirror
• Adapters allow a 5/16" bolt to pass through to attach the mirror
• Sold in pairs
• Made in the U.S.A.