Khrome Werks

KHROME WERKS Black 14" Fat Ape Hanger 1 1/4" Handlebars, Harley 08-16 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 14" Fat Ape Hanger 1 1/4" Handlebars, Natural, Harley 08-16 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black 2+2 Bagger Sweeper 1" Handlebars, end rise rise height 11.25", Gloss, overall width 34.5", pullback sweep 9", Harley 08-13 FL

• 2" taller than current +2" Sweeper bars
• The throttle grip end is notched and the bar is milled for internal wiring to accommodate the electronic throttle control sensor unit (can also be used on pre-2008 models)
• Cable changes may be required; wire extension for the ETC may or may not be needed
• Dimpled, knurled and available in duplex nickel chrome plated or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 2+2 Wide Sweeper 1" Handlebars, Custom Sweeper, Plus 2s, center width 8.5", Natural, end rise rise height 11.25", overall width 32", pullback sweep 8.75", Harley 08-16 FL

• 2" taller than current +2" Sweeper bars
• The throttle grip end is notched and the bar is milled for internal wiring to accommodate the electronic throttle control sensor unit (can also be used on pre-2008 models)
• Cable changes may be required; wire extension for the ETC may or may not be needed
• Dimpled, knurled and available in duplex nickel chrome plated or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, center width 5", Natural, end rise rise height 10"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black 16" Narrow Ape Hanger 1" Handlebars, center width 5", end rise rise height 13.75", Gloss, overall width 32", pullback sweep 6.75"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 16" Narrow Ape Hanger 1" Handlebars, center width 5", Natural, end rise rise height 13.75", overall width 32", pullback sweep 6.75"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black Heritage 1 1/4" Handlebars, Gloss, Harley 96-16 FX 96-16 FL 96 - 16 XL

• Tough, 11/4"-diameter steel handlebars with chrome plating or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring and notched for electronic throttle control
• Knurled 31/2" on-center to prevent slippage
• Clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard controls and grips
• May require ETC wire extensions on some models
• Made in the U.S.A.

KHROME WERKS Black 14" Fat Ape Hanger 1 1/4" Handlebars, Gloss, overall width 35", pullback sweep 7.75", Harley 08-16 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black 12" Fat Ape Hanger 1 1/4" Handlebars, Gloss, overall width 34.5", pullback sweep 7.5", Harley 08-16 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black 12" Fat Ape Hanger 1 1/4" Handlebars, Gloss, overall width 35", Harley 08-13 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black 12" Ape Hanger 1" Handlebars, drilled, end rise rise height 10", Harley 86-13 FL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black 16" Ape Hanger 1" Handlebars, center width 8", drilled, end rise rise height 13.75", Gloss, overall width 35.25", Harley 84-16 FX 84-16 FL 86 - 16 XL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black 12" Ape Hanger 1" Handlebars, center width 8", drilled, end rise rise height 10.25", Harley 84-16 FX 84-16 FL 86 - 16 XL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black Bad Boy 1" Handlebars, center width 10"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black Drag Bar 1" Handlebars, center width 8.25", end rise rise height 0"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black Drag Bar 1" Handlebars, center width 6.5", end rise rise height 2.75", Gloss, overall width 26.5", pullback sweep 5.5"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Black XLS-Style Drag Bar 1" Handlebars, center width 4.75", Gloss, overall width 27.25"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome Heritage 1 1/4" Handlebars, Natural, Harley 96-16 FX 96-16 FL 96 - 16 XL

• Tough, 11/4"-diameter steel handlebars with chrome plating or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring and notched for electronic throttle control
• Knurled 31/2" on-center to prevent slippage
• Clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard controls and grips
• May require ETC wire extensions on some models
• Made in the U.S.A.

KHROME WERKS Chrome 16" Ape Hanger 1" Handlebars, center width 8", Natural, drilled, end rise rise height 13.75", overall width 35.25", Harley 84-16 FX 84-16 FL 86 - 16 XL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, center width 8", Natural, drilled, end rise rise height 10.25", Harley 84-16 FX 84-16 FL 86 - 16 XL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, Natural, drilled, end rise rise height 10", Harley 86-13 FL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Fat Ape Hanger 1 1/4" Handlebars, Natural, overall width 35", Harley 08-13 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome Drag Bar 1" Handlebars, center width 8.25", Natural, end rise rise height 0"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome Low-Rise Drag Bar 1" Handlebars, center width 6.5", Natural, end rise rise height 2.75", overall width 26.5", pullback sweep 5.5"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 16" Fat Ape Hanger 1 1/4" Handlebars, Natural, center width 7.5", overall width 35", pullback sweep 7.75", Harley 08-16 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Fat Ape Hanger 1 1/4" Handlebars, Natural, center width 7.5", overall width 34.5", Harley 08-16 FL

• 11/4"-diameter formed steel handlebars with duplex nickel chrome-plated or gloss black finish
• 1" center mounting section and 1" grip mounts
• Pre-drilled for internal wiring; notched for electronic throttle control
• 31/2" on-center knurling; clamping width is 5.5" to accommodate one-piece top riser clamps
• Work with standard 96-16 style controls and grips
• Do not fit with hydraulic c6utch
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome Bad Boy 1" Handlebars, center width 10"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

Finish	Chrome
Features	Knurled Center
Type/Bend	Bad Boy
Style	Dimpled
Rise	6"
End Rise	6"
Width	31-1/4"
Center Width	3-1/2"
Pullback/Sweep	4-1/4"
Height	6"
Handlebar Diameter	1"
Controls Diameter	1"
Clamping Diameter	1"
Material	Steel

KHROME WERKS Chrome OEM Replacement 1" Handlebars, Dimpled, Super Glide-style, center width 4.75", overall width 27.25", specific application, Harley 87-91 FX 83 - 08 XL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome OEM Replacement 1" Handlebars, Dimpled, Heritage Style, center width 7.5", Natural, end rise rise height 11.5", overall width 31.5", pullback sweep 5.25", specific application, Harley 87-07 FL

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 18" Ape Hanger 1" Handlebars, Natural, end rise rise height 15.5", overall width 35.25", pullback sweep 6.75"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 16" Ape Hanger 1" Handlebars, center width 8", Natural, end rise rise height 13.75", overall width 35.25", pullback sweep 6.75"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, center width 8", Natural, end rise rise height 10.25"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, center width 8", Natural, end rise rise height 10.25"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.

KHROME WERKS Chrome 12" Ape Hanger 1" Handlebars, center width 8", Natural, end rise rise height 10.25"

• 14-gauge steel tubing
• Diamond knurled for OEM risers to prevent slippage, unless noted
• Available in OEM and custom bends
• Bars are not drilled or dimpled unless noted
• Available in polished chrome or gloss black finish
• Made in the U.S.A.