Motorcycle Chaincase Gaskets for Kawasaki from K and G Cycles!
13 products
13 products
COMETIC STREET GASKET, Fiber, Set, thickness .039", Kawasaki 81-83
DS-C8468
Regular price $24.95In Stock
/
Shipping calculated at checkout.
COMETIC STREET GASKET, Fiber, Set, thickness .039", Kawasaki 81-83
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC STREET GASKET, Fiber, Set, thickness .047", Kawasaki 73-80
DS-C8263X
Regular price $24.95In Stock
/
Shipping calculated at checkout.
COMETIC STREET GASKET, Fiber, Set, thickness .047"
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Clutch Cover Gasket,, Each, Kawasaki 03-08
DS-09344042
Regular price $22.95In Stock
/
Shipping calculated at checkout.
COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Clutch Cover Gasket,, Each, Kawasaki 11-15
DS-09344011
Regular price $30.95In Stock
/
Shipping calculated at checkout.
COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Clutch Cover Gasket,, Each, Kawasaki 07-12
DS-09344004
Regular price $30.95In Stock
/
Shipping calculated at checkout.
COMETIC CLUTCH COVER GASKET, made in the usa, Each, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Clutch Cover Gasket, Kawasaki 06-10
DS-09343997
Regular price $30.95In Stock
/
Shipping calculated at checkout.
COMETIC Clutch Cover Gasket, made in the usa, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Clutch Cover Gasket, Kawasaki 06-14 ZX-14 Ninja
DS-09343995
Regular price $24.95In Stock
/
Shipping calculated at checkout.
COMETIC Clutch Cover Gasket, made in the usa, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Clutch Cover Gasket, Kawasaki 86-12
DS-09343993
Regular price $23.95In Stock
/
Shipping calculated at checkout.
COMETIC Clutch Cover Gasket, made in the usa, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Clutch Cover Gasket, Kawasaki 95-02
DS-09343985
Regular price $8.95In Stock
/
Shipping calculated at checkout.
COMETIC Clutch Cover Gasket, made in the usa, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Clutch Cover Gasket, Kawasaki 90-05
DS-09343984
Regular price $8.95In Stock
/
Shipping calculated at checkout.
COMETIC Clutch Cover Gasket, made in the usa, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC Clutch Cover Gasket, Each, Gasket, OEM Kawasaki 73-83
DS-09343970
Regular price $7.95In Stock
/
Shipping calculated at checkout.
COMETIC Clutch Cover Gasket, made in the usa, Each, specific application, Gasket, OEM Replacement
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC LOWER END GASKET KIT, Kawasaki 03-08
DS-09343813
Regular price $68.95In Stock
/
Shipping calculated at checkout.
COMETIC LOWER END GASKET KIT, made in the usa, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
COMETIC LOWER END GASKET KIT, Kawasaki 04-05
DS-09343810
Regular price $49.95In Stock
/
Shipping calculated at checkout.
COMETIC LOWER END GASKET KIT, made in the usa, specific application
- Gaskets and gasket sets used by professionals in high-performance machines and as OE replacements worldwide
- Materials may vary depending on what is correct and engineered for specified application
- Each PART # contains the proper amount of gaskets for one application
- Made in the U.S.A.
HEAD AND BASE GASKETS
- Quality materials developed for maximum performance tolerances and longevity; available in several thicknesses and materials
- Sold each
- Center or shim layer is uncoated stainless steel, which can be varied to accommodate multiple thickness requirements
- Outer layers are embossed and coated on both sides with Viton to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes
- MLS (Mutli-Layer Steel) head gaskets promote an even torque load across the gasket sealing surface utilizing LCE (Load Control Embossments), providing less bore distortion and better piston ring seal for more power
LOWER END KITS
- Contains all gaskets and seals needed
STATOR AND CLUTCH COVER GASKETS
- AFM is a compounded nitrile synthetic rubber bonded to an aluminum core with a high temperature resistance of more than 250 F; it has an 85% recovery while maintaining a strong torque retention
- Made from AFM material for longevity
- No gasket sealants or silicon bead is required, re-torque is also not required
- Sold each
VALVE COVER GASKETS
- Made from AFM or thick fiber material depending on application
- Sold each
EXHAUST GASKETS
- Sold as a set per application
- Exhaust gaskets are made for extreme temperatures
