Motorcycle Frames - Rigid XL

KRAFT TECH INC. Rigid Style Frame, specific application, Harley 04 - 13 XL

• Utilizes the OEM 04-13 XL powertrain system for easy and precise engine mounting
• Constructed of 11/4" thick wall, DOM steel tubing
• 30 degree rake with a 0" stretch
• Frames are MIG and TIG welded for maximum strength
• Includes axle
• Oil tank and bracket sold separately
• Requires custom mounting of tank, seat and rear fender
• Accepts up to a 150 mm rear tire
• Made in the U.S.A.

200 XL rigid frame features a 40° rake with a 3" stretch in front legs to accept a 1.125" belt with 200 series tire.

Frame has kick stand tab and battery box mount welded in place. Accepts a right side drive transmission and is disc brake type.

For use on 1957-1985 XL model.

Manufacturer's Statement of Origin is supplied for the frame.
200 XL rigid frame features a 40A, rake with a 3" stretch in front legs to accept a 1.125" belt with 200 series tire. Frame has kick stand tab and battery box mount welded in place. Accepts a right sid

**NOTE: All frames are shipped to the lower 48 states by common carrier truck only.

200 XL rigid frame features a 40° rake with a 3" stretch.
Frame will accept 1" neck cups, Wide Glide fork assembly, oil tank, battery box which must be ordered separately. Includes mounts for stock gas tank. Frame also features a 16 digit serial number stamped onto the frame.

Accepts right side drive transmission and is disc brake type. For use on 1986-2003 XL model.

*NOTE: Suggested to use weld tank mounts to top frame tube. Do not drill frame tube.

XL 1986-2003

KRAFT TECH INC. Rigid Frame For With 180/200 Rear Tire, Harley 86 - 03 XL

• Constructed of 11/4" thick wall, DOM steel tubing with 11/2" backbones
• 30 rake and 0" stretch
• Frames are TIG-MIG welded and accept 86-03 XL engines
• Mid-control mounts; no forward control mounts
• 3/4" rear axle kit included with 180/200 frames, 130 frame will require a custom 3/4" x 117/8" rear axle
• PART #0501-0069 is engineered for 130/140 tire
• PART #0501-0070 is engineered for 180 tire with 11/2" belt or 200 tire with chain
• Made in the U.S.A.

KRAFT TECH INC. Rigid Frame With 130/140 Rear Tire, Harley 86 - 03 XL

• Constructed of 11/4" thick wall, DOM steel tubing with 11/2" backbones
• 30 rake and 0" stretch
• Frames are TIG-MIG welded and accept 86-03 XL engines
• Mid-control mounts; no forward control mounts
• 3/4" rear axle kit included with 180/200 frames, 130 frame will require a custom 3/4" x 117/8" rear axle
• PART #0501-0069 is engineered for 130/140 tire
• PART #0501-0070 is engineered for 180 tire with 11/2" belt or 200 tire with chain
• Made in the U.S.A.

Ironhead Sportster Rigid Frame 30 Deg Rake,No Stretch Uw 180 Mm Tire K15161

• 1 1/4 thick wall DOM steel tubing with 1 1/2 backbones
• Wide tire frames accept 180 series tire with chain drive
• Stock frame accepts 140 tire with chain
• rames must be used with our part 26036 front lower motor mounts

Note: As with any frame-up custom build project, it is common shop practive to pre-assemble the entire motorcycle prior to any paint work for compatibility verification of all parts used. Kraft Tech
30° Rake
0 Downtube Stretch
0 Backbone Stretch
180 Tire

Ironhead Sportster Rigid Frame 30 Deg Rake,2" Stretch Uw 140 Mm Tire K15152

• 1 1/4 thick wall DOM steel tubing with 1 1/2 backbones
• Stock frame accepts 140 tire with chain
• Frames must be used with our part MID-26036 front lower motor mounts

Note: As with any frame-up custom build project, it is common shop practice to pre-assemble the entire motorcycle prior to any paint work for compatibility verification of all parts used.

Kraft Tech
30° Rake
+2 Downtube Stretch
+2 Backbone Stretch
130/140 Tire

V-Twin Manufacturing Weld on Type Frame Hardtail fits XL 1982-2003 - Sold Each
Weld on Type Frame Hardtail Weld on hardtail with weld on bracket is for stock frames with disc brake. Utilizes 1-1/4 tubing. This hardtail accepts a 14-1/2" long axle with a 3/4" outer diameter and stock rear wheel. DIY hardtailing is eas

Weld on hardtail with weld on bracket for stock frames with 2000-UP disc brake.
The adjuster blocks are on the outside of the rear axle plate and are threaded to accept the axle adjuster kit. This hardtail accepts 3/4" axle. Top seat plate is included but must be welded on by customer or fabricator. DIY hardtail is easy to install as the alignment is accomplished by the mount design provided. Custom application on 1979-1981 XL. Order battery carrier, rear belt, axle, 2000-up caliper, caliper mount, exhaust bracket and hardware separately. Welding should be performed by a skilled welding technician. The axle's width ranges from 11-1/4" - 11-3/4". Installer may spread or compress to necessary width.

Tubing Diameter: 1.023"

Thickness Of Tubing: 0.182"

Width Between Axle: 10-3/4

V-Twin Manufacturing Bolt On Hardtail XL - Sold Each

Frame hardtail is bolt on type. Accepts drum style brakes on a rigid frame.
Unit should be aligned for chain clearance prior to final welding. The distance between the inside to inside of the axle plates is 9-5/16". Custom application on 1952-1978 X