Motorcycle Handlebars by Todd's Cycles

Replica chrome 1" handlebar for stock replacement with a 2" knurled center spacing and indents for wiring.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• 11/4" handlebars with 1" clamping area (unless noted)
• Notched for electronic throttle control (except for FXSTS/FLSTS models)
• Polished welds
• Slotted for internal or external wiring
• Compatible with hydraulic clutch
• Work with heated grips
• Offer a clean line of sight to the stock mirrors
• Made in the U.S.A.

• Designed for use with the batwing fairing
• Notched for throttle-by-wire
• Large laser-cut, burr-free wiring slots
• Allow the use of the factory heated grips and stock controls
• 8" and 10" Apes will work with the stock hydraulic clutch and brake lines
• Made in the U.S.A.

• Designed for use with the batwing fairing
• Notched for throttle-by-wire
• Large laser-cut, burr-free wiring slots
• Allow the use of the factory heated grips and stock controls
• 8" and 10" Apes will work with the stock hydraulic clutch and brake lines
• Made in the U.S.A.

• Designed for use with the batwing fairing
• Notched for throttle-by-wire
• Large laser-cut, burr-free wiring slots
• Allow the use of the factory heated grips and stock controls
• 8" and 10" Apes will work with the stock hydraulic clutch and brake lines
• Made in the U.S.A.

• Designed for use with the batwing fairing
• Notched for throttle-by-wire
• Large laser-cut, burr-free wiring slots
• Allow the use of the factory heated grips and stock controls
• 8" and 10" Apes will work with the stock hydraulic clutch and brake lines
• Made in the U.S.A.

• Designed for use with the batwing fairing
• Notched for throttle-by-wire
• Large laser-cut, burr-free wiring slots
• Allow the use of the factory heated grips and stock controls
• 8" and 10" Apes will work with the stock hydraulic clutch and brake lines
• Made in the U.S.A.

• This is the "Stripper" handlebar found on many of Todd's Cycle's custom bikes
• Made from thick-wall steel
• Feature polished welds
• Slotted for internal wiring
• No knurling or electronic throttle control notch
• Made in the U.S.A.

• This is the "Stripper" handlebar found on many of Todd's Cycle's custom bikes
• Made from thick-wall steel
• Feature polished welds
• Slotted for internal wiring
• No knurling or electronic throttle control notch
• Made in the U.S.A.

• Handlebars mount using stock hardware
• Slotted for internal wiring
• Made in the U.S.A.

• This is the "Stripper" handlebar found on many of Todd's Cycle's custom bikes
• Made from thick-wall steel
• Feature polished welds
• Slotted for internal wiring
• No knurling or electronic throttle control notch
• Made in the U.S.A.

• This is the "Stripper" handlebar found on many of Todd's Cycle's custom bikes
• Made from thick-wall steel
• Feature polished welds
• Slotted for internal wiring
• No knurling or electronic throttle control notch
• Made in the U.S.A.

• This is the "Stripper" handlebar found on many of Todd's Cycle's custom bikes
• Made from thick-wall steel
• Feature polished welds
• Slotted for internal wiring
• No knurling or electronic throttle control notch
• Made in the U.S.A.

• This is the "Stripper" handlebar found on many of Todd's Cycle's custom bikes
• Made from thick-wall steel
• Feature polished welds
• Slotted for internal wiring
• No knurling or electronic throttle control notch
• Made in the U.S.A.

• This is the "Stripper" handlebar found on many of Todd's Cycle's custom bikes
• Made from thick-wall steel
• Feature polished welds
• Slotted for internal wiring
• No knurling or electronic throttle control notch
• Made in the U.S.A.

• This is the "Stripper" handlebar found on many of Todd's Cycle's custom bikes
• Made from thick-wall steel
• Feature polished welds
• Slotted for internal wiring
• No knurling or electronic throttle control notch
• Made in the U.S.A.