Hardbags and Extensions

Left side black plastic saddlebag lid with round hole cutout for the lock.
Lid is Pre-drilled and pre-fit for ease of installation. The process of injection creates smooth inside and outside surfaces. All pieces are constructed of black fiberglass and reinforced FRP plastic, ready for primer and paint. FRP is made up of polyphenylene oxide/polyamide alloy. Order gasket and hinge set separately.
OEM No: 90757-85 Left side saddlebag lid has a primed finish, ready for paint . Lid has a round hole cut out for the lock. Order gasket and hinge set separately. Pre-drilled and pre-fit for ease of instal

FLT 1985-1992

• Accent the line of your fender and hide clutter for a custom look
• Steel construction with E-coating, ready to color match paint
• Upper fillers mate up to the stock fender/lower filler on Street Glides
• Requires removal of stock license plate mount bar
• Two versions - smooth for models with or without detachable backrests; slotted for models with detachable TourPak
• Must remove stock license plate mount bar
• Made in the U.S.A.

Set includes right and left side lids without speaker cutouts.
Pre-drilled and pre-fit for ease of installation. The process of injection created smooth inside and outside surfaces. All pieces are constructed of black fiberglass and reinforced FRP plastic, ready for primer and paint. FRP is made up of poluphenylene oxide/polyamide alloy. *NOTE: Lids are shipped in raw ABS material and must be primed before being painted. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.
OEM No: 90756-93 Set includes right and left side lid for your saddlebag. Lids are plastic with a primed finish, ready for paint. Pre-drilled and pre-fit for ease of installation. Ready for your custo

Fits:

FLT 1993-2013
FLHT 1993-2013

• Injection-molded ABS bags provide superior strength and rigidity
• Angled-cut design gives the ultimate custom look and provides maximum cornering clearance
• Saddlebags are stretched 5" longer than stock to cover the muffler front to back and give that stretched look
• Bags have cutouts for dual exhaust applications; block-off plates available separately for single or shorty exhaust applications
• Accept OEM lids and hardware (sold separately)
• Right- and left-side bags and block-off plates sold separately

• Designed specifically for Drag Specialties extended saddlebags, PART #s 3501-0832 and 3501-0833, when adding a custom exhaust system or mufflers
• Precision formed to match the exhaust cutouts in the saddlebags
• Manufactured from the same material as the Drag Specialties saddlebags
• Must be professionally bonded to saddlebags and requires some bodywork before painting
• Available for right- or left-side applications
• Sold each

• Designed specifically for Drag Specialties extended saddlebags, PART #s 3501-0832 and 3501-0833, when adding a custom exhaust system or mufflers
• Precision formed to match the exhaust cutouts in the saddlebags
• Manufactured from the same material as the Drag Specialties saddlebags
• Must be professionally bonded to saddlebags and requires some bodywork before painting
• Available for right- or left-side applications
• Sold each

• Fit FLST models when used with Bagger-Tail's brackets
• Made from 16-gauge cold-rolled steel
• Available in raw or chrome finish
• Sold in pairs
• Made in the U.S.A.

• Constructed from 16-gauge steel and E-coated for rust and corrosion resistance and are designed to fill the void between the lower fender and saddlebags; a minor detail that makes a major impact!
• The only steel fillers designed to be used with or without detachables
• Detachable style is for use with OEM detachable accessories (available separately)
• Great to use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area
• Fillers are available in Standard for stock bags; Extended and Extended Plus for use with Klock Werks Benchmark rear fenders and OEM or Klock Werks saddlebags extensions (and rolled bottom fillers match the look of the bags and serve to line up the fullback bag extensions and Klock Werks stretched fender)
• All are sold in pairs and include all necessary hardware and instructions to install them
• Made in the U.S.A.

• Constructed from 16-gauge steel and E-coated for rust and corrosion resistance and are designed to fill the void between the lower fender and saddlebags; a minor detail that makes a major impact!
• The only steel fillers designed to be used with or without detachables
• Detachable style is for use with OEM detachable accessories (available separately)
• Great to use in conjunction with Klock Werks Curvaceous Upper Fillers to smooth out that entire area
• Fillers are available in Standard for stock bags; Extended and Extended Plus for use with Klock Werks Benchmark rear fenders and OEM or Klock Werks saddlebags extensions (and rolled bottom fillers match the look of the bags and serve to line up the fullback bag extensions and Klock Werks stretched fender)
• All are sold in pairs and include all necessary hardware and instructions to install them
• Made in the U.S.A.

• Accent the line of your fender and hide clutter for a custom look
• Steel construction with E-coating, ready to color match paint
• Upper fillers mate up to the stock fender/lower filler on Street Glides
• Requires removal of stock license plate mount bar
• Two versions - smooth for models with or without detachable backrests; slotted for models with detachable TourPak
• Must remove stock license plate mount bar
• Made in the U.S.A.

• Fit FLST models when used with Bagger-Tail's brackets
• Made from 16-gauge cold-rolled steel
• Available in raw or chrome finish
• Sold in pairs
• Made in the U.S.A.

Right side saddlebag lid has a plastic primed finish ready for paint.
Order gasket set and hinge set separately.
OEM: 90756-93

Tech Note:

Suggested to use with #15-0580 or #15-0581 gasket set
Suggested to use

Saddlebag filler cover set comes in a raw finish.
Not suitable for detached tour packs.

Chrome saddlebag filler cover set.
Not suitable for detached tour packs.