Manifolds

Filter

    Filter

    Brand

    Collection

    clear
    Motorcycle Manifolds from K and G Cycles!
    11 products

    11 products

    Sifton Intake Manifold, XL, 1986-Up
    V-Twin Manufacturing
    $66.35
    S&S CYCLE Manifold Conversion Kit, Natural, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 87 - 94 XL
    S&S Cycle
    $249.95
    S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 5.550"
    S&S Cycle
    $149.95
    S&S CYCLE Flange-Mount Intake Manifold, Natural, Harley 84-00 FX 84-99 FL 87 - 94 XL
    S&S Cycle
    $129.95
    S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 4.9365", engine size 88"-95"
    S&S Cycle
    $149.95
    S&S CYCLE Flange-Mount Intake Manifold, No MAP Sensor Port., Harley 84-00 FX 84-99 FL 87 - 94 XL
    S&S Cycle
    $159.95
    S&S CYCLE Flange-Mount Intake Manifold, Harley 99-06 FX 99-06 FL
    S&S Cycle
    $159.95
    V-Twin Manufacturing OE 90-99 BT-Ev-Intake Manifold
    V-Twin Manufacturing
    $69.70
    V-Twin Manufacturing Manifold S&S Manifold for Evolution XL
    V-Twin Manufacturing
    $144.20
    V-Twin Manufacturing Stock Intake Manifolds, Origal type, 1999-up TC-88
    V-Twin Manufacturing
    $61.50
    V-Twin Manufacturing Thunder Jet EFI Manifold w 4.975-4.980'' Long Cylinders, 117'' Kit
    V-Twin Manufacturing
    $66.55
    Sifton Intake Manifold, XL, 1986-Up Harley V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    Sifton Intake Manifold, XL, 1986-Up

    VT-35-8033

    $66.35

    In Stock

    Save $-66.35
    /
    Shipping calculated at checkout.
    Sifton Intake Manifold, XL, 1986-Up

    Intake manifold for Evolution models converts stock rubber compliance fittings to a more rigid mount system. Manifold will accept S&S CV or other aftermarket carburetor.
    Order flange kit separately.
    Fits:
    XL 1986-UP
    UOM: 1 - EA
    Country of Origin: Imported

    S&S CYCLE Manifold Conversion Kit, Natural, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 87 - 94 XL Harley S&S Cycle - K and G Cycles
    S&S Cycle

    S&S CYCLE Manifold Conversion Kit, Natural, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 87 - 94 XL

    DS-10500296

    $249.95

    In Stock

    Save $-249.95
    /
    Shipping calculated at checkout.
    S&S CYCLE Manifold Conversion Kit, Natural, made in the usa, Each, specific application, Harley 84-00 FX 84-99 FL 87 - 94 XL
    • Kit converts stock 80" Evolution manifold to a more rigid-mount system
    • Eliminates cracking and leaking problems associated with the stock rubber compliance fittings
    • Includes an S&S Performance manifold, mounting flanges, two specially molded O-rings and two .350" spacers for spacing out the stock air cleaner or carb mount bracket
    • Fits 84-99 80" models if flange-type carburetor or adapter is used
    • Replacement flange seals also available
    • Made in the U.S.A.
    S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 5.550" Harley S&S Cycle - K and G Cycles
    S&S Cycle

    S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 5.550"

    DS-10500294

    $149.95

    In Stock

    Save $-149.95
    /
    Shipping calculated at checkout.
    S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 5.550"
    • Used to install a stock CV carburetor on S&S 3.625", 4" and 4.125" bore motors
    • Will also fit S&S Hot Setup and Super Stock head kits
    • PART #1050-0295 is used to install 48 mm CV or Mikuni carburetor on Twin Cam 88", 95" bore motors
    • Made in the U.S.A.
    S&S CYCLE Flange-Mount Intake Manifold, Natural, Harley 84-00 FX 84-99 FL 87 - 94 XL Harley S&S Cycle - K and G Cycles
    S&S Cycle

    S&S CYCLE Flange-Mount Intake Manifold, Natural, Harley 84-00 FX 84-99 FL 87 - 94 XL

    DS-10500293

    $129.95

    In Stock

    Save $-129.95
    /
    Shipping calculated at checkout.
    S&S CYCLE Flange-Mount Intake Manifold, Natural, Harley 84-00 FX 84-99 FL 87 - 94 XL
    • Can be used to replace stock "compliance fitting" manifold on 84-89 and stock rigid-mount manifold from 90-99
    • Use with stock or S&S cylinder heads
    • For use with stock 5.5550" length cylinders
    • Requires the use of S&S intake seals and flanges (sold separately)
    • Made in the U.S.A.
    S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 4.9365", engine size 88"-95" Harley S&S Cycle - K and G Cycles
    S&S Cycle

    S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 4.9365", engine size 88"-95"

    DS-10500292

    $149.95

    In Stock

    Save $-149.95
    /
    Shipping calculated at checkout.
    S&S CYCLE Spigot-Mount Intake Manifold For S&S Heads, cylinder length 4.9365", engine size 88"-95"
    • Used to install a stock CV carburetor on S&S 3.625", 4" and 4.125" bore motors
    • Will also fit S&S Hot Setup and Super Stock head kits
    • PART #1050-0295 is used to install 48 mm CV or Mikuni carburetor on Twin Cam 88", 95" bore motors
    • Made in the U.S.A.
    S&S CYCLE Flange-Mount Intake Manifold, No MAP Sensor Port., Harley 84-00 FX 84-99 FL 87 - 94 XL Harley S&S Cycle - K and G Cycles
    S&S Cycle

    S&S CYCLE Flange-Mount Intake Manifold, No MAP Sensor Port., Harley 84-00 FX 84-99 FL 87 - 94 XL

    DS-10500110

    $159.95

    In Stock

    Save $-159.95
    /
    Shipping calculated at checkout.
    S&S CYCLE Flange-Mount Intake Manifold, No MAP Sensor Port., Harley 84-00 FX 84-99 FL 87 - 94 XL
    • Can be used to replace stock "compliance fitting" manifold on 84-89 and stock rigid-mount manifold from 90-99
    • Use with stock or S&S cylinder heads
    • For use with stock 5.5550" length cylinders
    • Requires the use of S&S intake seals and flanges (sold separately)
    • Made in the U.S.A.
    S&S CYCLE Flange-Mount Intake Manifold, Harley 99-06 FX 99-06 FL Harley S&S Cycle - K and G Cycles
    S&S Cycle

    S&S CYCLE Flange-Mount Intake Manifold, Harley 99-06 FX 99-06 FL

    DS-10500046

    $159.95

    In Stock

    Save $-159.95
    /
    Shipping calculated at checkout.
    S&S CYCLE Flange-Mount Intake Manifold, Harley 99-06 FX 99-06 FL
    • For mounting an S&S E and G series carburetor or flange mount carburetor on a 99-06 Twin Cam motor with S&S or stock cylinder heads
    • Will also fit a 84-99 80" Evolution that requires a manifold with a map sensor port
    • Come with a map sensor port and match OEM intake ports
    • Made in the U.S.A.
    V-Twin Manufacturing OE 90-99 BT-Ev-Intake Manifold Harley V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing OE 90-99 BT-Ev-Intake Manifold

    VT-35-9169

    $69.70

    In Stock

    Save $-69.70
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing OE 90-99 BT-Ev-Intake Manifold - Sold Each

    Intake manifolds are of cast alloy spigot type.

    OEM: 27019-89A


    FXST 1990-1999
    FLST 1990-1999
    FLT 1990-1999
    FXR 1990-1994
    FXD 1991-1999
    V-Twin Manufacturing Manifold S&S Manifold for Evolution XL Harley V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing Manifold S&S Manifold for Evolution XL

    VT-35-8021

    $144.20

    In Stock

    Save $-144.20
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing Manifold S&S Manifold for Evolution XL - Sold Each

    S&S intake manifold for Evolution models converts stock rubber compliance fittings to a more rigid mount system.
    The outer diameter of this manifold measures 1.88". Order flange kit separately.


    XL 1986-UP

    Tech Note:

    Suggested to

    V-Twin Manufacturing Stock Intake Manifolds, Origal type, 1999-up TC-88 Harley V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing Stock Intake Manifolds, Origal type, 1999-up TC-88

    VT-35-0652

    $61.50

    In Stock

    Save $-61.50
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing Stock Intake Manifolds, Origal type, 1999-up TC-88 - Sold Each

    Intake manifold are of cast alloy and spigot type.

    OEM: 27613-99


    FXST 1999-UP
    FLST 1999-UP
    FXD 1999-UP
    FLT 1999-UP
    V-Twin Manufacturing Thunder Jet EFI Manifold w 4.975-4.980'' Long Cylinders, 117'' Kit Harley V-Twin Manufacturing - K and G Cycles
    V-Twin Manufacturing

    V-Twin Manufacturing Thunder Jet EFI Manifold w 4.975-4.980'' Long Cylinders, 117'' Kit

    VT-35-0154

    $66.55

    In Stock

    Save $-66.55
    /
    Shipping calculated at checkout.
    V-Twin Manufacturing Thunder Jet EFI Manifold w 4.975-4.980'' Long Cylinders, 117'' Kit - Sold Each

    ThunderJet EFI Intake Manifold for 4.975-4.980" long cylinders.
    For use with 117" kit or 120" Axtell engine with S&S flywheels


    Custom application