New products

Solo seat mount kit includes the nose bracket springs rear brackets and hardware. 1965-1984 FL 1971-1984 FX

Rear engine mount ISO kit. 2004-2016 XL

This kit includes the black T shock and adapater clevis. The mini shock seat post replaces the stock post. Seat tee kit includes mini shock which will support a total weight of 650lbs. **NOTE: Requires 5/16 bolt for T mounts. Clevis must be drilled out to fit later models with 3/8 bolt of shock body. 1936-1952 W 1936-1964 G 1941-1964 FL

This kit includes the black T with 5/16 hole and rubber booted 6-1/2 single shock. Shock has external black spring. 1941-1980 FL 1936-1952 W 1936-1973 G

1941-1980 FL 1936-1952 W 1936-1973 G

Solo seat mount pan is the direct bolt on type so the solo seats will mount directly to the frame and features a textured black powder coat finish. The springs and studs are not included. The rear tab mounts to 1/4 -20 threaded insert on the rear fender. *NOTE: Electronics may have to be relocated on some models. *NOTE: For 2007-2009 models the power module under the seat must be relocated. *NOTE: Fits 1986-2003 + 2004-up XL models provisions for both front mounting. For mounting on 1986-2003 models you may cut off tabs. The 2004-up applications has several hole patterns but
31-1761" This kit includes the black T with 5/16 hole and rubber booted 4 single shock. Shock has external black spring. *NOTE: Weight capacity is for 1 rider under 300lbs. 1986-UP XL

Black oil cooler bracket. *NOTE: For the Sifton oil cooler Horizontal Mount Style. 1982-UP XL

Front seat mount bracket kit includes a polished stainless steel nose bracket kit with a raw weld on pivot block. 0-All models

Black oil tank bracket set fits round tanks Custom application for round tanks

Mini solo seat shock kit includes 4 shocks and two 1 clamps and springs. For use on frames with a 1 cross member on the rear part of the frame. Shock has an alloy body and adjuster ring with a black three piece spring clamp. Peg mount clamp set features a chrome finish. Additional hardware may be required for some applications. *NOTE: Weight capacity is for 1 rider under 300lbs. 1941-1957 FL for rigid frames 1958-1984 FL for swingarm frames

Mini solo seat shock kit includes two 4 shocks frame clamps for 1 bars and springs. For use on frames with a 1 cross member on the rear part of the frame. Shock has an alloy body and adjuster ring. Additonal hardware may be required for some applications. NOTE: Must order 1 clamps separately. *NOTE: Weight capacity is for 1 rider under 300lbs. 1941-1957 FL for rigid frames 1958-1984 FL for swingarm frames

Air shock for solo seat mounting with a single 5/16 x 24 thread on the top and 5/8 coarse on the bottom. The extended length is 3-1/2 and it's 2 long fully compressed. *WARNING: Always use teflon tape or PTFE thread sealant on air fittings to prevent leaks. Max torque for: 5/16 bolt 50in/lbs 5/8 stud 25ft/lbs max inflation: 75psi. 1941-1957 FL

Dual air shock solo seat mount kit for use on rigid frames. Includes (2) solo seat air cushions. Includes black plate. *NOTE: Maximum weight is 175 lbs. *NOTE: Lower raw bracket must be welded to frame cross bar. Upper top plate is back finished for solo seat mounting. 0-All models

Horseshoe oil tank base features a black finish and is for use on short oil tanks with electric start. Oil tank base fits horseshoe oil tanks that have the raised inner bracket to allow room for electric start motors. Supplied black finish without hardware. Base is for electric York start applications. Support rods for mini batteries must be fabricated by builder. Electric start systems available. *NOTE: The oil tank mount base plate allows more space on the underside for the electrical starter. 1941-1957 FL

Docking hardware kit is for detachable racks and side plates. 2009-2017 FXD

Chrome docking hardware kit is for the installation of detachable racks sissy bars and side plates. Includes docking points fender mounting brackets and required mounting hardware. 2010-2017 FXDWG

Chrome exhaust clamp kit is for front pipes on 2017-up FLT M8 models. 2017-UP FLT

Solo seat single air cushion includes a weld-on type rear mount and a single air bag for riders up to 175 pounds. Includes black plate. *WARNING: Always use teflon tape or PTFE thread sealant on air fittings to prevent leaks. Max torque for: 5/16 bolt 50in/lbs 5/8 stud 25ft/lbs max inflation: 75psi. *NOTE: Lower raw bracket must be welded to frame cross bar. Upper top plate is back finished for solo seat mounting. 0-All models

Replica OEM style tombstone lamp license plate bracket attaches with 3/16 diameter rivets. Constructed from stamped steel and painted gloss black. Excellent reproduction of the OE 68150-49 Guide R-H5 bracket. For use on aftermarket tombstone tail light bracket. This is the later style bracket which was riveted on for the 1949-54 taillights. Holes measure 7/8 center-to-center and are not countersunk the spacing between the holes is different than that of the 1947 and 1948 versions. *NOTE: Bracket only! Must order mounting hardware separately. 1949-1954 FL 1949-1954 W

Shifter fork cam shaft lock screw and oil seal kit. 1938-1952 W 1938-1973 G

Solo seat hinge kit includes polished stainless steel nose bracket and a cast steel frame pivot to be welded on. Pivot block curved to fit 1-1/4 frame tube. 0-All models

Universal solo seat hinge kit requires weld on installation of front pivot and rear station. Heavy duty 2.5 hair pin springs are included. Bolts and other required hardware must be provided by the installer. Custom application

Black saddlebag supports are designed to fit the contour of the fender struts and protect your bags from brake caliper and swingarm. Supports are 2 bolt type. 1971-1984 FX 1971-1984 FXE

Servi-car upper shock bracket set is for the top of the shock and features a parkerized finish. 1951-1973 G

Solo seat nose bracket is laser cut from shot peen investment cast stainless steel with a natural finish and features the dropped design which allows the mount of the seat pan nose to be closer. *NOTE: Must order nose pivot mount separately. Custom application

Ignition coil mount strip set is zinc plated. 1936-1946 EL 1941-1946 FL 1930-1936 VL 1937-1952 W 1937-1947 G

Solo seat spring mount kit features black components with chrome hair pin springs. Springs mounting brackets frame cover and hardware included. For use with OE style solo seats. *NOTE: Will fit 2007-2009 models if the regulator is relocated. 2004-2006 XL 2010-UP XL

Solo seat solid mount kit will rigid mount solo seats on without springs on Sportster models and features a black finish. Mounting brackets and hardware included. For use with OE style solo seats. 2010-UP XL

Hanger strap features a parkerized finish. Custom application

Ignition coil and switch bracket mounts the coil and universal key switch in the one-piece bracket. *NOTE: Mount hardware not included. 1958-1984 FL

Black heavy duty top motor mount features a convenient spot to relocate your ignition switch and the option of a CV carburetor choke mounting slot. Includes coil mount. 2004-2018 XL

Chrome headlamp mount bracket fits under tin covers. Custom Application