New products

Bull neck cast extension can be welded to 1947 bull neck frames or to the frame forging. *NOTE: Must be welded in place. 1947-1947 EL 1947-1947 FL

Raw rigid rear fender tab set is the OE type to replace right and left sides on fender brace. Must be riveted in place. *NOTE: Rivets not included. 1936-1952 EL 1941-1957 FL

Raw steel frame forging hallmark plate is an accurate investment for reconstruction and restoration of 1936-1957 rigid frames includes various forging logos and numbers. Investment cast steel in one sheet cut numbers out as desired. Frame may be milled or ground down to accept numbers and forging marks. The numbers when cut from the plate may be ground down for specific application. *NOTE: Must be welded in place. *NOTE: The plate is 2.5 - 2.8mm thick. 1936-1957 Custom Application

Speedometer mount frame casting must be welded. Features provision for steering damper pin. 1948-1984 FL

Replaces the lower fairing support brackets when the engine bar is removed. Includes mounting hardware. 1998-2003 FLTR

Replaces the lower fairing support brackets when the engine bar is removed. Includes mounting hardware. 2004-2008 FLTR

Replaces the lower fairing support brackets when the engine bar is removed. Includes mounting hardware. 2010-2013 FLTRX

Replaces the lower fairing support brackets when the engine bar is removed. Includes mounting hardware. 2009-FLTR

Black bracket for mounting the front fenders on models with 21 wheels. 2014-UP FLT

Chrome bracket for mounting the front fenders on models with 21 wheels. 2014-UP FLT

Chrome front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2004-UP XL

Black front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2006-2017 FXD

Chrome front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2006-2017 FXD

Black front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2000-2017 FLST

Chrome front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2000-2017 FLST

Black front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2009-UP FLT

Chrome front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2009-UP FLT

Black front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1997-2008 FLT

Chrome front turn signal highway bar features built in amber LED lights to work as turn signals. **WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped very low speed slide). They are not made nor intended to provide protection from bodily injury in a collision with an automobile or any other object. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1997-2008 FLT

***NOTE: NY Warehouse Pick-Up Only*** 500w fat tire e-bike features a low type orange frame wheel and handlebar without the front lamp. The saddle is the city soft type. The max speed is 15.5 mph (15 km/h) with a 48V battery. The large LCD display is the power indicator only with the ability for 3.7 mph (6km/h) cruise control. Features a rust resistant chain and disc front and rear brakes. The city style tires are 26 x 4.0. The range is 15.5m (25km) when using electric only and 31m (50km) with the pedal assistant. Custom application

Luggage rack is fender mounted for loads of 10 pounds or less. 2006-2017 FXD

Rear fender is constructed of steel and has a raw finish. Fender is smooth formed and not drilled for builders application. Fender measures 12-3/4 wide X 38 long tip to tip. May require fender spacing. We suggest pre-fitting fender prior to painting. Custom application for 250 and 300 Tire

4 point docking hardware kit is required for installing detachable sissy bars luggage rack or tour pak. 2009-2013 FLHR 2009-2013 FLTR 2009-2013 FLHX

This complete kit contains the docking hardware necessary to install detachable sissy bars and luggage racks. 2018-UP FLFB 2018-UP FLFBS 2018-UP FXBR 2018-UP FXBRS

This complete kit contains the docking hardware necessary to install detachable sissy bars and luggage racks. 2018-UP FLFB 2018-UP FLFBS 2018-UP FXBR 2018-UP FXBRS

Standard height detachable sissy bar features a chrome finish and is 14-1/2 tall. *NOTE: Installation requires the separate purchase of the docking hardware kit. 2018-UP FLFB 2018-UP FLFBS 2018-UP FXBR 2018-UP FXBRS

Replica Panhead luggage rack feature the 3 channel design. Replica luggage rack replaces OEM #53403-52. Requires OEM #53457-52 Panhead luggage rack stud nuts for installation. The fender must first be drilled for installation. Luggage rack fits on 1949-1957 FL Panhead models with smooth rear fenders however can be retro fitted to other fenders with that share the same width. *NOTE: Muse order hardware separately. *NOTE: This will need modification to fit over chrome saddlebag mount plates. **HINT: Loosen connector rods between the bars mount to struts then re-tighten connecto
50-1667" Servi-car fender features oiled raw steel finish and measures 8 wide. Fender may be cut to length for different applications. Fender is for use on side cars and servi car models. There are 5 holes in the rear for tail lamp mounting. 1948-1952 EL 1948-1957 FL

Luggage rack mounting kit for use with detachable type luggage rack includes the docking hardware and rotary latch kit. 2004-UP XL

Detachable docking hardware kit features a chrome finish and includes all components required for the installation of detachable passenger backrest or saddlebags. 2013-2017 FXSB 2013-2017 FXSBSE 2016-2017 FXSE

Chrome side plate docking hardware kit for detachable side plates. Order side plates separately. 1993-2001 FXDWG

Chrome solid sissy bar kit includes a 20 sissy bar back and a set of non-detachable side plates. Rigid sissy bar side plates mount to the inside of the fender struts between the fender and struts. 2004-UP XL

Chrome grab rail kit includes 6-1/4 high x 7-1/2 wide sissy bar detachable side plates and hardware. Detachable sissy bar side straps mount to the outside of the fender struts. 2004-UP XL

Chrome grab rail kit includes 6-1/4 high x 7-1/2 wide sissy bar and non-detachable side plates. Rigid sissy bar side plates mount to the inside of the fender struts between the fender and struts. 2004-UP XL

Chrome sissy bar kit includes a 11 sissy bar back and a set of detachable side plates. Detachable sissy bar side straps mount to the outside of the fender struts. 2004-UP XL