New products

Zinc plated steel bracket used to adapt one piece FXDF front fenders to fit FLH forks on 1949-up 41mm models. Set of two. Bracket is formed from laser cut steel. The zinc finish acts as a good base for primer and paint and can be painted to customers specifications. 1949-UP FL 1949-1984 FLH 1980-UP FLT

Rear fender rail trim has a V design. 2009-UP FLT

Raw fender has a thickness of 1mm. Will fit 2004-up XLH model. This chopped rear fender is shorter then the bobbed style and is reccommended that a side mount tail lamp be used. A stock tail lamp will not fit with this fender. We suggest pre fitting the fender prior to painting. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2010-UP XL 1200N 2010-UP XL 883N

Fender has edge rolled on front and is drilled. This fender is for use on the Model 48 . The brackets are not included. We suggest pre fitting the fender prior to painting. Use with brace 24-1036 2011-UP XL Forty-Eight Model

Rectangle tool box has a raw finish and includes keys. Order mount hardware separately. Item is shipped in raw finish. Item is shipped raw oil steel. You can make em' rusty! Like barn fresh... or apply patina processes as desired! 1936-1939 EL 1938-1939 UL

Saddlebag rear filler strip set with a flat black finish. Right and left included in kit. 1993-2008 FLT

Chrome front fender tip. Tips attach by 2 stud on each tip. Installation requires drilling of holes in fenders. Order side rails separately. *NOTE: Tips are constructed of stamped steel and chrome plated. 1935-1936 VL 1936-1940 EL 1937-1948 UL 1941-1948 FL

Rigid tool box includes chrome tool box bracket and mount kit for rigid hardtail frames. The kit is to mount on the right side lower rear frame tube. Includes Tedd Cycle patch. Bracket must be welded on. 1941-1957 FL

Chrome 13 sissy bar is constructed of 5/8 round solid stock featuring the original poor boy style. The side plates are the non-detachable type. The rear wheel must be removed for installation. The top is screwed to the side plates by 2 allen screws on each side. *NOTE: Bar height is measured from the first bend to top. 1986-2003 XL

Bobbed style rear fender constructed of steel. Will not fit stock fender struts. Fender may require trimming and finishing for chain relief. We suggest pre fitting the fendor prior to painting. Note: All fenders are shipped raw. Fenders have tooling marks on the rolled or beaded ends from the manufacturing process. Note: Preparation is required before priming and painting after fender is test fit for ease of installation. *Note: UPS may consider this part as packaged ov ersize for shipment as compared to the actual weight which will result in higher shipping costs. 1957-1978 XL

Bobbed rear fender features steel construction.
Order tail lamp, bracket, license plate, and hardware separately.

XL 1982-1993

Width: 8"

Replica smooth rear fender. For use with custom tail lamp. Tail lamp hole must be cut out. Fender is not equipped with indents for signals. We suggest pre-fitting the fender prior to painting.

*Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs.

1986-1999 FLST

Bobbed rear fender kit includes steel fender chrome struts chrome tail lamp bracket and "cateye" tail lamp. We suggest pre-fitting the fender prior to painting. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation!

Custom application

Front fairing outer shell black unpainted ABS finish. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2014-UP FLHT

Raw front fender is a glide style fender with wide Spring Fork braces to fit servi-cars with an offset rocker Spring Fork and a star hub wheel. Axle plate mounts are 11-1/2 wide between the inside surfaces. Brackets included with this fender are secured in place by rivets. Front fender tip trim holes must be drilled if needed. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! *Note: UPS may consider this part as packaged o
50-0742" Replica glide front fender with a raw finish with correct early type bracket set riveted on. Fender is without trim holes. Before priming or painting fit the fender body braces and mounting points in place. Fender rivets hinge and brackets will have to be tweaked for final fitment. Patience is required for proper installation! *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1950-1957 G

Black hand rail fits behind driver seat area and mounts as stock. 2014-UP FLT

Chrome hand rail fits passenger seat area and mounts as stock. 2014-UP FLT

Black windshield deflectors mount onto fork brackets. 1986-2017 FLST

Chrome windshield deflectors mount onto fork brackets. 1986-2017 FLST

Front fender chrome mount kit attaches fender to forks using original style components. Order fender separately. Kit includes two screws two pivot shafts two washers two lock nuts two rubber spacers two bushings two pivot links with bearings installed and two fender inserts. 1993-2006 FXSTS

Front fender tip is construced of ABS plastic and features a chrome finish. 2014-UP FLT

Tour-Pak luggage hinge kit has smooth style look with no exposed hardware features a black gloss finish. Upgrade the appearance of you tour pack with this premium hinge kit styled to compliment the OE latches! Complete with two hinges and necessary hardware. Drill may be required to remove factory installed rivets. 1988-2013 FLT

Replica rear fender strut set features a chrome finish. 2008-2017 FLST

Brackets are 7/8 wide with slots at the end featuring a raw steel construction. Set of two. 1947-1955 FL

This stylish black tie down bracket kit mounts to the front fork cover to connect tie down straps. This kit is for 2014- up Touring modes except Road Glide Road King and Trike models. Moving the tie down point form the handlebar to the triple tree area reduces wear on the handlebar bushings and ensures a consistent easy to access mounting point. Includes mounting hardware. 2014-UP FLHT 2014-UP FLHTCU 2014-UP FLHTK 2014-UP FLHX

This stylish chrome tie down bracket kit mounts to the front fork cover to connect tie down straps. This kit is for 2014- up Touring models except Road Glide Road King and Trike models. Moving the tie down point form the handlebar to the triple tree area reduces wear on the handlebar bushings and ensures a consistent easy to access mounting point. Includes mounting hardware. 2014-UP FLHT 2014-UP FLHTCU 2014-UP FLHTK 2014-UP FLHX

Rigid tool box includes black tool box bracket and mount kit for rigid hardtail frames. The kit is to mount on the right side lower rear frame tube. Includes Tedd Cycle patch. Bracket must be welded on. 1941-1957 FL

Replica raw right side oval tool box includes keys. Item is shipped raw oil steel. You can make em' rusty! Like barn fresh... or apply Patina processes as desired! 1940-1957 FL 1940-1948 UL

7 Round custom smooth rear fender has beaded edge and end and raw finish. Fender has a thickness of 1.05mm.

Note: All fenders are shipped raw. Fenders have tooling marks on the rolled or beaded ends from the manufacturing process. Note: Preparation is required before priming and painting after fender is test fit for ease of installation.

Custom application

Contoured luggage rack featuring a chrome finish. 1979-UP FLT with king, chopped, and razor luggage systems

Alloy adapter mount bracket allows installation of narrower Fat Kid FLST style front fender on FLT-FLHT with 16 front wheels. 1980-1999 FLT with rigid or detachable side plates. 1980-1999 FLHT with rigid or detachable side plates.

Rear fender end with hinge features a raw finish. The brace measures 5/8 wide. Set includes stay bars. We suggest pre fitting the fender prior to painting. Order mount bolt kit separately. 1949-1957 FL 1936-1945 EL