New products

Chrome 2:1 exhaust header set features lake style 3" big diameter turn out end, full coverage chrome removeable heat shields and 1-3/4" header tubes.
Includes 18mm O2 sensor bungs.

*NOTE: Maximize your motorcycles performance and efficiency by complementing your new exhaust system with a fuel turner management system and or EFI remapping. Remapping is suggested to optimize performance while reducing the possibility of damage to your motor or new exhaust system.

*NOTE: The footboard spacer with lock pin may be required.

FLT 2007-2013

TC-88 lake style exhaust system with a tapered megaphone muffler end features a chrome finish. Billet tip cap finishes the end of the muffler chamber.
Includes mounting hardware and heat shields. Can be used with footboards. Megaphone end features a 45° angle and is baffled.

***NOTE: Cosmetic imperfections around oxygen sensor bungs, sensors not included.

FXST 2007-2016
FLT 2007-2017

Chrome lower triple tree without lock tab accepts 39mm fork tubes.

FXD 1991-2005

Chrome heat shield set, for the front and rear, features a plain design.

XL 2014-Up

Keep your motorcycle upright while not in use with this 11" chrome kickstand.

50006-89

1989-2003 XL

Rebuild kit rebuilds 5/8" bore front master cylinder for single disc models.

FXST 1985-1995
XL 1985-1995
FLST 1986-1995
FXD 1991-1995
FXR 1985-1995

Black 68 tooth pulley accepts 1-1/8" wide belts, indexing nut, seal and seal spacer as required.

XL 2004-2006

FXD 2:1 lake side pipe exhaust features a black finish.
Exhaust pipe features a 1-3/4" diameter at the cylinder head and a 2" diameter before collector.

*NOTE: Exhaust header set is painted black but has oxidation (rust) on the inside. The installer may have to re-paint the pipe set, inside and outside. We recommend using VT-41-0125. VHT Flame Proof 1350 Black, to coat the inner and outer surfaces of the header pipes.

**NOTE: Pipe has 18mm O2 sensors.

*NOTE: Unbaffled

*NOTE: Needs forward controls

FXD 2006-2017

FXD 2:1 lake side pipe exhaust features a black finish.
Exhaust pipe features a 1-3/4" diameter at the cylinder head and a 2" diameter before collector.

*NOTE: Unbaffled

*NOTE: Needs forward controls

FXD 1991-2005

Chrome 2" curvado exhaust drag pipe set is for XL models. Set includes removable oxygen sensor plugs. These pipes provide plenty of flow and a great sound. The unique shape will compliment any bike.
Mounting bracket included. Will work with forward controls. *NOTE: The longer pipe is 39". **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only.

XL 1986-2003

Chrome 1-1/4 handlebar features throttle by wire right side notches and has holes with a copper wire inside for pulling thru internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs.

2008-2014 FLTR

Black 2:1 exhaust header set features lake style 3" big diameter turn out ends that are baffled, full coverage chrome heat shields and 1-3/4" header tubes.
Turn out end is clamped on and will allow the installer to rotate into the desired position.

*NOTE: Maximize your motorcycles' performance and efficiency by complementing your new Wyatt Gatling exhaust system with a fuel turner management system and or EFI remapping. Remapping is suggested to optimize performance while reducing the possibility of damage to your motor or new exhaust system. Includes 10mm Delphi Sensor Bung.

**NOTE: Must order rear footpeg spacer separately.
**NOTE: End is lake type profiled oval. Tucks in close to saddlebag and side cover.
**NOTE: The footboard spacer with lock pin VT-31-1318 may be required.

Chrome groove style front axle spacer kit includes washers and studs. 1997-UP FLSTC

Chrome knurled primary cover screw kit includes 19 screws and 19 washers. 1999-2006 FLT

Flat top grease fitting adapter is designed for use with 0340 alemite grease fitting. Tapped 1/8 NPT to use with a standard grease gun. 1929-1938 WL 1930-1936 VL

Transmission bottom stud kit for side valve models. Can also be used on Big Twin 4-speed models for rigidity when a primary belt drive is installed. *NOTE: 2 sets are required for this application. 1929-1952 W 1929-1971 G

Upper and lower engine mount bolts with a zinc finish. 1984-1999 FXST 1986-1999 FLST

Parkerized transmission mount kit for side valve models. 1929-1973 G

Chrome rocker box screw kit without stud. 1977-1985 XL

Chrome rear brake disc bolts with a 3/8 x 16 x 1 thread size and features a round button head. 1992-2017 FXD 1992-UP FXST 1992-UP FLT 1992-UP XL 1992-UP FLST

Chrome rear disc to hub bolt and nut kit with 3/8 -16 x 1 threads. 1992-2017 FXD 1992-UP FXST 1992-UP FLST 1992-UP XL 1992-UP FLT

Chrome allen type knurled screw and washer set for primary cover. Includes 17 screws and 15 washers. 1994-2003 XL

Primary cover chrome allen type knurled screw kit. 1991-1993 XL

Allen type screw kit for the cam cover. 1986-UP XL