New products

Replica jiffy stand leg only features a black finish. 1936-1952 WL 1932-1935 WL

Rear spring fork legs only features a chrome finish and is for use on FXST models. Fork stem is oxidized due to the plating process. 1988-2006 FXSTS

Chrome clutch lever bracket accepts rocker clutch pedal assembly and mounts left footboard. 1939-1952 WL 1941-1973 G

Chrome jiffy kickstand leg kit includes chrome leg chrome spring parkerized bushing and spring plate. This is a 4 piece kit. 1930-1952 W

Right side parkerized brake pedal strap has a riveted brake pedal mount and holes for mounting the footboard. For use on solo or Servi-Car models. 1938-1973 G 1939-1957 WL

Left side parkerized clutch pedal strap supports the clutch pedal and footboard. Requires use of jockey pedal as used on Servi-Cars VTNO. 49-1956 1947-1973 G

Push type handlebar throttle spiral for the left and right side on Spring Fork models. Spiral has a 0.010 oversized inner diameter. 1935-1948 FL 1936-1940 EL 1935-1936 VL 1935-1948 WL 1935-1948 G

Parkerized clutch lever bracket accepts rocker clutch pedal assembly and mounts left footboard. 1939-1952 WL 1941-1973 G

Kickstand bushing featuring a parkerized finish 1941-1952 W

New Old Stock Rear side car bracket with stud. *NOTE: Some discoloration and scratches. 1973-1979 FL

Replica style jockey clutch pedal has a chrome finish. 1947-1973 G

This original style jockey clutch pedal has a parkerized finish. 1947-1973 G

Chrome kick starter arm for side valve models are taller than the servi-car type. 1937-1945 WL 1937-1962 G

Hellings & Stellings style riser set will accept 1 handlebars and will fit with an original spring fork handlebar cut down from stock. Set is natural finish cast stainless steel. The Stellings and Hellings riser set are reproduced accurately from investment cast stainless steel. Riser mounting will require a stock set of handlebars to be cut down so there is a short stub remaining to accept the risers the bar stub will be 1 . The riser set is offset to mount to the bar end studs to make the riser stems parallel when installed. V-Twin offers a top tree with stubs as an alternative.
49-1929" Chrome seat post is assembled with springs and hardware. Seat post diameter is 1.180 . Order top clevis pin and bottom nut separately. 1936-1948 UL 1941-1948 FL 1936-1942 EL 1936-1957 G 1936-1952 W

Replica parkerized seat post kits are assembled with heavy duty spring set installed. Seat post is 1.060 in diameter and uses the 14-3/4 spring rod. These seat posts are equipped with the heavy duty spring set installed! Order lever nut kit separately. 1929-1952 W 1933-1973 G 1930-1934 VL

Brake pedal pad is nickel plated with two set screws. 1941-1984 FL 1936-1940 EL 1937-1948 UL

Chrome rear kickstand catch. 1936-1952 WL

VL Spring Fork end set features cast pieces with a 1/2 hole for repairing Spring Fork legs. The inner diameter for the tube is 1 . *NOTE: Must be brazed in place. 1930-1936 VL 1930-1937 RL

Backing plate assembly includes a black backing plate parkerized arm shoes springs parkerized speedometer drive pivot stud and cam completely assembled. Updated new production. Check speedometer drive fit before final assembly. Order drum and axle kit separately. 1941-1952 W

Knucklehead rocker box retaining rings features a parkerized finish. 1936-1940 EL

Knucklehead rocker box fitting features a brass finish. Machined of brass should be cadmium plated by customer for exact/correct restoration. 1936-1937 EL

Natural brass cap includes a screw-in fitting for front rocker boxes for only 1936 61 Knuckleheads. Machined of brass should be cadmium plated for accurate reproduction. *NOTE: SEt includes brass fitting and cap one of each. 1936-1937 EL

Spring Fork damper knob cover kit features a chrome ribbed design as designed from the 1940's accessory. Acorn nut included. *NOTE: Covers flat nut under fork damper lever on Spring Forks. 1936-1952 W 1936-1957 G 1936-1948 EL 1941-1948 FL

Touring battery side cover pin screws into original side covers. 1997-UP FL

10 Pack

New Old StocK army 45 oil cap. 1937-1952 W

Headlamp features a black housing with script Guide logo and clear lens. Includes a chrome rim reflector and factory style riveting. Bulb is 6 volt 25 watt Headlamp is reproduced under license that is issued by General Motors Restoration owner of Guide Cycle Ray trade marks and Delco Remy trade marks. *NOTE: Center stud is 7/16 -20 fine thread. *NOTE: Has 12-24 thread rim screw. terminal block threads are 4mm. 1936-1940 EL 1941-1948 FL 1936-1957 G 1936-1952 WL

45 steel gas tank panel is used as a filler strip for WR type split tanks. *NOTE: Panel will have to be hand fit to frame to elongate the slot of the front bolt. 1941-1952 WR

Raw forged steel Spring Fork shock bracket set is for repairing OEM or replica shock brackets. Must be welded on with low heat. 1936-1948 EL 1936-1952 W 1941-1948 FL 1941-1957 G

1936-1952 W 1936-1940 G with inside rockers 1941-1957 G 1937-1952 Chief

Black spring fork assembly is completely assembled with inner springs. Fork has a 7/8 non removable stem. *NOTE: Rocker set not included must order separately as required. For 45 Solo applications rockers with 3/8 axle holes are mounted on the inside of the fork legs using 7/16 threaded stud. For 1941-57 Servi-Car applications offset rockers are mounted on the outside ofthe fork with a bolt on 5-bolt lug star hub wheel and studs that are 1/2 . Rocker mount holes are drilled to 7/16 but must be enlarged to 1/2 for offset rockers. The distance between the rockers measure 6.5 .
49-1763" Chrome spring fork assembly is completely assembled with inner springs. Fork has a 7/8 non removable stem. *NOTE: Rocker set not included must order separately as required. For 45 Solo applications rockers with 3/8 axle holes are mounted on the inside of the fork legs using 7/16 threaded stud. For 1941-57 Servi-Car applications offset rockers are mounted on the outside ofthe fork with a bolt on 5-bolt lug star hub wheel and studs that are 1/2 . Rocker mount holes are drilled to 7/16 but must be enlarged to 1/2 for offset rockers. The distance between the rockers measures 6.5
49-1773" Rear brake shoe set is for use with Indian Chief models with linings installed. 1936-1952 W 1936-1940 G with inside rockers 1941-1957 G