New products

These spark plugs are for the antique motorcycle enthusiast who enjoy riding. Spark plugs are air cooled with a heat range #3. Includes the brass top nuts which are used with earlier style terminals or hood style and sealing gaskets. Exact duplicates of the globe 18mm spark plugs of 1937. Harley Davidson fought with Champion Spark Plug over the construction of this air cooled plug so Harley contracted with Globe for this year. Terminal nut is removable. Plug set requires a round feeler gauge. Globe style plug has no markings except heat range #3. Spark plugs have a 1-1/8 he
49-0981" Polished stainless steel offset top triple tree cover with pin for Spring Fork front ends. 1936-1947 EL 1941-1947 FL 1937-1947 UL

Parkerized brake lever screw set 1937-1940 UL 1928-1929 JD 1930-1936 VL

Hubcap if for the left side brake plate and is held in place by the seal spring and washer. 1941-1948 FL 1936-1948 UL 1941-1957 G

Black rear frame stand for rigid models acts as a frame stand for removing rear wheel for service. Order stand catch and mounting hardware separately. **NOTE: Not to be used for a ride off stand. 1937-1940 EL 1941-1957 FL

Replica chrome old style luggage rack contours all rear fenders 1934-up. This luggage rack is great for attaching thro-over saddlebags. Does not interfere with post mounted buddy or police solo seats. Order tapered screws separately. Rack is designed for loads of ten pounds or less.
Mount holes measure 12-1/8" in length and 4-5/16" in width center-to-center.

1941-1957 FL
1936-1940 EL

Mirror stem is stamped steel and is riveted contruction with a black oxide finish. Billet 6 single slot girder style style stem for right or left side. Order hardware and mirror head separately. 1936-1940 EL 1941-1945 FL 1934-1936 VL 1934-1952 WL 1934-1957 G 1937-1948 UL

Zinc cable ends have 1/4 x 24 threads. 1947-1973 G 1947-1952 W

Complete outer brake backing plate kit for 45 models features a chrome finish. Kit includes a chrome backing plate chrome arm cam parkerized pivot stud pivot plate and parkerized speedometer drive with clip. Check speedometer drive fit before final assembly. Order rear brake shoes and springs separately. 1941-1952 W

Saddlebag hardware kit includes all necessary tethers hardware seals and hinges. Includes saddlebag lock and key set. Comprehensive saddlebag lid latch kits are great for aftermarket custom saddlebags and are a direct replacement for OEM latch kits. All saddlebags and lids are constructed of FRP reinforced plastic readyy for primer and paint. FRP is made up of polyphenylene oxide/polyamide alloy. 1993-UP FLT

Standard type chrome Spring Fork handlebar with inline with 1 bar ends for external fast throttle applications. The forged triple tree is welded in place. For use on stock style original type Spring Forks with an inline stem. *NOTE: Center forging surface is not polished before painting or plating **NOTE: Forged tree has holes on each side for wiring or cables. ***Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1936-1946 EL 1941-1945 FL 1936-1952 W 1941-1957 G 1938-1945 UL

Standard type black Spring Fork handlebar with offset with 1 bar ends for external fast throttle applications. The forged triple tree is welded in place. For use on stock style Spring Forks with an offset stem. *NOTE: Center forging surface is not polished before painting or plating **NOTE: Forged tree has holes on each side for wiring or cables. ***Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1946-1948 FL 1946-1948 UL

1936-1939 EL 1937-1939 UL

Tour-Pak black replacement latch kit includes front and rear latches and mounting hardware for installation. Comes with catch and spacer plate plus screws. These die-cast latches make access to the tour pack more convenient than ever! New secure and release design will open or close by simply pressing down on the top of the lid the self-aligning mechanism will position the lid and a simple push of a button releases the lock and pops the lid back open. Latches feature hidden hardware and the front latch will wrap around the original tour pack lock. One set required for each tou
49-0891" Side valve clutch bearing spacer. 2006-2013 FLT

Saddlebag support kit has a chrome finish and flexible corners that adjusts to fit on all swingarm FXST and FLST models. Custom application

Top straps for saddlebag. Includes 8 screws. Includes qty 4 pieces 12-16x5/8 self tapping screws (OEM #3596) and 4 pieces 8-32x1/2 stainless truss head screws (OEM #3592). 1993-UP FLT

Stainless steel wear plates are for the saddlebag lid. Plates come in a set of four and require installation with adhesive. 1993-UP FLT

Stainless steel reinforcing back plates are for the saddlebag lid latch. Plates come in a two piece set. 1993-UP FLT

1909-1915 F 1930-1936 VL 1930-1936 RL 1937-1948 UL 1917-1926 JD

These spark plugs are for the antique motorcycle enthusiast who enjoy riding. Spark plugs are air cooled with a heat range #3. Includes the brass top nuts which are used with earlier style terminals. Includes top ventilated brass collars for cooling as original Doering design! Terminal nut is removable. Plug set has a round feeler gauge. Spark plugs have a 18mm thread and the large hex measures 1-3/8 which is perfect for early restoration and riding. Set is for use with 1924 Harley models that require 7/8 thread spark plug. *NOTE: Sold as a pair. *NOTE: Air cooled spark plug
49-0880" Replica air cooled spark plug with 7/8 thread for early model motors and includes sealing washers sealing gaskets brass terminal and brass removeable terminal nuts. Fits all 7/8 applications. Includes top ventilated brass collar for cooling as original Doering design! Terminal nut is removable. Original globe design of the 1930's. Features a #3 heat range. Packaged in a gift box. *NOTE: 7/8 spark plugs fit 1923 and ealier singles and twins 1924-1947 use 18mm plugs. Best for Pre-1925 JD & F models. Doering plugs feature a nickel plated base with cooling holes as original de
49-0882" Set includes four plastic rub bars installed and right and left side latches for saddlebag. 1930-1936 VL 1930-1936 RL 1926-1929 J 1937-1947 W 1937-1948 U 1936-1947 G 1924-1930 JD

Set includes four bail head studs four washers four grommets four receptacles and four mounts for the left and right side. Includes torx head hardware. 1995-2013 FLT

Chrome spring fork rocker set includes right and left sides for use on 16 wheels. 1997-2005 FLSTS

45 scavenger oil pump assembly with the welch plug installed features a parkerized finish. Includes studs and nuts. *NOTE: Cover has no outlet for rear chain oiler. 1937-1948 U 1937-1952 W

Spring Fork windshield clamp kit features a complete zinc finish and is for use with 1 handlebars. Kit includes four U-straps two eye bolts two collars two nuts and two lock washers. 1936-1948 U 1936-1952 W 1936-1940 EL 1941-1949 FL

Chrome face plate set is for the right and left sides of the saddlebag latch with indent and includes an OE replacement reflector set. . 1993-2013 FLT

Spring Fork damper bracket with cadmium finish. 1941-1945 UL 1941-1945 EL

Parkerized 18mm Spark plug socket. 1936-1947 W 1936-1947 EL

Chrome Hollywood style handlebars with cross bar for inline forks. handlebars are without internals. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1940-1952 WL 45"
49-0860" 1940 1952 G 45"
49-0860" 1937 1946 EL1941-1946 FL To early 1946 -74"
49-0861" 1936 1940 EL

Chrome Hollywood style handlebars with cross bar for offset spring forks. Handlebars are without internals. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1946-1948 UL From late 1946 1946-1948 EL From late 1946 1946-1948 FL From late 1946

Chrome steel push type handlebar spiral set is for the left and right side on Spring Fork models. Both spark and throttle sleeves are push type with chrome collar installed. The direction of the internal spiral is clockwise. Sold as a pair. 1936-1948 EL 1936-1948 UL 1936-1948 G 1936-1948 W