New products

Black pop-up gas cap is vented. Cap features a wrinkled look. 1999-UP FXST 1999-UP FLST 1999-2017 FXD

1996-1999 FXST 1996-1999 FLST

Bobbed two piece, 5 gallon gas tank features a left side petcock fitting to accept a late petcock fitting with nut. Features 1963-1965 emblem mounts.
Tank set will accept: stock dash, stock speedometer and gas caps. Features welded on emblem mounts which are 1/2" lower than on replica tanks to accept 1966-72 style emblems. Mounts measure 6-5/8" center to center.
*All tanks or tank sets will require hand fitting for correct dash alignment and fuel line fitment.
*Dash will need to be shimmed to achieve correct height during installation.

It is suggested to clean inside, pressure test, and use a tank sealer. We suggest using a Kreem gas tank combo kit to clean, condition and seal in order to prevent leaking and corrosion. Order gas cap set and petcock 

*Note: Carefully check the tank for flaws and fit before painting! Do not grind or sand the joints.

FL 1947-1984
FX 1971-1974

Suggested to use VT-38-6682 emblem set.
Suggested to use VT-37-8825 emblem mount screws.
Suggested to use with VT-35-9190 Petcock Straight Outlet with Nut Alloy.
Suggested to use with VT-38-0312 Stock Style Gas Cap Set Vented and Non-Vented.

2004-UP XL 883R, 883N and 1200N with EFI

Bobbed gas tank set accepts stock dash and speedometer. Tank has a 5.0 gallon fuel capacity. Tank features left side petcock hole. Petcock hole is 3/8 NPT to accept a male petcock. The tank is equipped with a bayonet style bung. Bayonet style cap set can be used. The tank accepts a 1966-1971 emblem set with installation of emblem mounts. Tank requires sanding and primer before painting. The petcock fitting should be masked or plugged during painting for easy installation of petcock. Order cap set and petcock separately. It is suggested to pressure test the tank and use a tank sea
38-0543" Gas tank set with right side forward petcock fitting has a fuel capacity of 5.0 gallons. Petcock hole is 3/8 NPT to accept male petcock. Tank set is exact replica for 1966 FL. Accepts right and left bayonet cap set. Requires sanding and primer before painting. Petcock fitting should be masked or plugged for easy installation. It is suggested to pressure test tank and use a tank sealer. We suggest using Kreem gas tank combo kit to clean condition and seal to help stop leaks and prevent corrosion. Uses male style petcock on right side forward. Set is equipped with 1966-1972 emble
38-0544" This 2.4 gallon gas tank is raised 2 in the front with forward cap. This allows more room for wires to be tucked underneath the tank. 1947-1984 FL

Features smooth black vented and non-vented gas caps. Vented cap fits the right side of dual or single cap tanks. Non-Vented fits the left side of bobbed tanks. will not fit screw in type tanks. 1973-1982 FL 1979-1982 FXS

Vented gas cap fits FL type bobbed tanks. The gas cap is for the right hand side of a dual or single cap tank. This cap features a black finish. Will not fit screw in type tanks. It is advisable to order caps in sets as they may not match the existing cap brand or style. 1973-1982 FL 1973-1982 FX 1973-1982 XL

This black steel gas cap set is ratcheting style. The right cap is vented and the left side is non-vented. Caps are screw in type. Cap set features low pressure relief vent recessed in cap to clear the filler neck vent tube. We suggest to use this cap set on bobbed and quickbob tanks. All tanks or tank sets will require hand fitting to give correct alignment for dash and fuel line fitment. Dash will also have to be shimmed when installed to achieve correct height. 1984-1995 FXST 1986-1995 FLST 1983-1984 FL 1983-1984 FX 1983-1994 FXR 1983-1995 FLT

Chrome replica eaton style vented gas cap set. 1965-1981 XL 1936-1952 EL 1941-1964 FL

Stock vented gas cap fits FL type bobbed tanks. The gas cap is for the right hand side of a dual or single cap tank. Features a black finish. 1971-1982 XL 1970-1982 FX 1940-1972 FL 1938-1948 UL 1936-1940 EL

Tourist Trophy gas tank set with brackets is 2.8 gallons without the dash cutout featuring a raw metal finish constructed of steel. For use with bayonet type gas caps. Top is smooth type without dash base cutout. Use for either 2 side of gas or 1 side oil on the right. The right side has two front 3/8 NPT and one 1/8 NPT male fittings for use as an oil tank. The left side accepts metric nut type petcock. Order hardware separately fittings and plugs not included. *NOTE: The rear mount bar has 5/16 x 24 threads which mounts to the seat T tab on the frame. *NOTE
38-0532" Replica FXBB gas tank features a raw finish and accepts a stock gas cap mount hardware and fuel injection units. 1941-1984 FL 1936-1952 EL 1970-1984 FX

LED fuel gauge features a chrome finish. 2008-UP FLST 2008-UP FXST 2008-UP FLHR 2009-UP FXDWG

Raw steel emblem/trim mount strip set is specifically for 1936-1946 models but can be attached by spot welding to any 3-1/2 gallon fat bob tank set Sold as a set of four. *NOTE: Order trim and emblems separately. 1936-1946 EL 1941-1946 FL 1937-1946 U 1937-1946 W 1937-1946 G

WR narrow type 45 2.5 gallon gas tank set features a raw finish. Tank has 2-3/8 NPT fittings on each side the left 1-1/4 gallon for the gas and the right 1-1/4 gallon for the oil. Tank uses two vented gas caps which are not included. Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas if oil tank is under seat ares but can be refitted to use gas on the left and oil on the right. Order required oil feed vent and return lines and oil return pipe kit mount kit 1936-46 shift gate plugs and caps separately. Right side
38-0497" WR narrow type 45 2.5 gallon gas tank set holds gas on both sides and features raw finish. Tank set has 2 3/8 NPT fittings on each side for gas and oil lines. Tank uses two vented gas caps which are not included. Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas but can be refitted to use gas on the left and oil on the right. This application required oil feed vent and return lines and oil return pipe kit available separately. Right side for oil will require oil a stand pipe with 3/8 NPT outside and 1/4 NPT inside
38-0498" Vented billet Krome Kap kit only features two caps. 1936-1952 W 1941-1952 WR

WR narrow type 45" 2.5 gallon gas tank set holds gas on both sides and features raw finish. Tank set has 2 3/8" NPT fittings on each side, for gas and oil lines. Tank uses two vented gas caps, which are not included.
Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas but can be refitted to use gas on the left and oil on the right. This application required oil feed, vent and return lines and oil return pipe kit available separately. Right side for oil will require oil a stand pipe with 3/8" NPT outside and 1/4" NPT inside thread. Pipe extension must be within 1/2" top of the tank. The nipples on the tank measure 3/8" Fittings in the bottom of the tank are 1/8" NPT, for use with gas petcocks or fittings. *NOTE: Order mount kit, 1936-46 shift gate, and related plugs and caps separately. Before installation or painting, check gas tank for any flaws. Do not grind or sand seams or welded joints. Clean the inside of the tank and pressure test. Check petcock openings, ensuring petcock can be easily installed. Use proper hardware for the installation process. Please install tank with fittings in frame with motor installed before painting.

WR 1941-1952
W 1936-1952

Fuel tank console door features a black finish with chrome eagle spirit accents. 2008-UP FLT

Air flow gas cap set features a black finish with screw in type caps. Set includes one vented and one non-vented with a raised center portion with machined reliefs. 1996-1999 FXST 1996-1999 FLST

1996-1999 FXST 1996-1999 FLST

WR narrow type 45 3 gallon gas tank set holds gas on both sides features raw finish. Tank set has 2 3/8 NPT fittings on each side for gas/oil lines. Tank uses two vented gas caps which are not included. Does not accept reserve fuel shut off rod or instrument dash panel assemblies. Both sides are intended for gas but can be refitted to use gas on the left and oil on the right. This application requires oil feed vent and return lines and oil return pipe kit available separately. Right side for oil will require oil a stand pipe with 3/8 NPT outside and 1/4 NPT inside thread. P
38-0493" Air flow gas cap set features a chrome finish with screw in type caps. Set includes one vented and one non-vented with a raised center portion with machined reliefs. 1936-1952 W 1941-1952 WR

Air flow style vented screw-in type gas cap features a black finish. 1999-UP FXST 1996-UP FLST 1996-UP XL 1996-2017 FXD

Legacy style 3.8 gallon gas tank with stock screw bung gives functional styling and improves rider comfort. Fully pressure tested will accept late model 2007 and up OEM fuel pump and fittings. Replaces stock tanks #61348-07 and #61405-07. Order gas cap separately. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2007-UP XL EFI models

1936-1952 W

One piece gas tank with 7.0 gallon fuel capacity for Touring models. Stretch style with steel construction.
Features curved bottom and dash. Includes hardware and rear mounting brackets. The use of the stock tank filler assembly is required. Requires a custom seat to be fitted, and accepts the stock OEM fuel pumps. When re-installing the fuel injection pump, check for clearance between the pump and tank bottom. The internal bracket tabs may have to be removed if more clearance for the pump installation is required.

**NOTE: Check the tank for flaws and fit before painting. Do not grind or sand the seams or joints. Clean the inside of the tank. It is suggested to pressure test and use a tank sealer. We suggest using Kreem gas tank combo kit to clean, condition, and seal to help stop leaks and prevent corrosion.

**NOTE: Suggested to use VT-39-0221 chrome dash extension panel if needed for FLT models with shorter seat to cover exposed frame.

2003-2007 FLT EFI

Kit features complete shut off rod with viton tip. Has bright cadmium plated seat fitting with a left tank reserve features chrome knob. 1950-1965 FL

Kit features complete shut off rod with viton tip. Has bright cadmium plated seat fitting with a left tank reserve features chrome knob. 1941-1948 UL 1941-1949 E 1941-1949 FL 1941-1949 W 1941-1949 G

Techno style gas cap set for the right and left side. Set is constructed of light weight metal and is chrome plated. 1996-1999 FXST 1996-1999 FLST

Chrome techno style gas cap set for the right and left side. 1996-1999 FXST 1996-1999 FLST

Chrome button head hexagon style vented and non-vented gas cap set for the right and left side. 1996-1999 FXST 1996-1999 FLST

Chrome hexagon style gas cap set for the right and left side. 1996-1999 FXST 1996-1999 FLST

Fuel tank console door features a black finish which is powder coated black. 2008-UP FLT

Fuel tank console door features a chrome finish. 2008-UP FL

Replica Eaton style restoration quality bayonet type gas cap by V-Twin MFG. Our exclusive tooling has produced accurate reproductions including the Eaton Mark inside. The caps are the exact replica of the Original Eaton styles. The cap shell is stamped steel assembled to cap seal and insides. These are the correct weight as they are not die cast. Sold as a pair. 1953-1964 FL 1959-1969 XL

Chrome plated replica gas cap is vented Eaton style with 10mm wide knurl. Restoration quality by V-Twin MFG. Our exclusive tooling has produced accurate reproductions including the Eaton Mark inside. The caps are the exact replica of the Original Eaton styles. The cap shell is stamped steel assembled to the cap seal and insides. These are the correct weight as they are not die cast. Gas cap features the period custom embossed ring on the top dome. 1941-1952 FL 1941-1952 EL 1941-1948 U

FLT fuel door release kit features chrome push button design. 1992-UP FLT