New products

Petcock set is machined from brass and features a "Zicad" finish. The right is 1/8"-27 NPT and the left is 3/8"-18 NPT.

*NOTE: Disassemble petcock, remove cotter pin, and use fine compound to "lap in" taper for a non-leak seal.

*NOTE: Zicad is a dull shade of zinc similar to cadmium.

U 1937-1939
EL 1936-1939

Petcock set features a zicad finish. The right side is 1/8 -27 NPT and the left side is 3/8 -18 NPT. *NOTE: Zicad is a dull shade of zinc similar to cadmium. 1936-1939 UL 1936-1939 EL

Linkert M51L 1-1/4 carburetor hardware kit includes all parts except brass body and throttle arm. This is for 1-1/4 bore linkert carburetors. 1937-1952 WL 1937-1952 WLA 1937-1952 WLC 1937-1952 WLD 1941-1948 U 1941-1952 WR

Main nozzle for linkert carburetors. 1941-1952 Indian

Linkert carburetor idle passage plug for Indian models. 1941-1952 Indian

Linkert needle valve lever and screw kit is for 1 carburetors and includes the brass needle valve lever with the bolt and spring. Kit includes a 7/8 venturi Linkert Needle Valve for 1 carburetors with screw kit Nylon Bushing kit for the throttle shaft Float Arm Assembly which includes an unsinkable M float one piece cast brass float arm the bolt pivot cap and pin set for mounts. Lever fits all 1 Linkert carburetors on M-2 M-4 M-5 M-6 M-7 M-8 M-11 M-12 M-16 M-17 and M-18 models. 1930-1936 RL 1932-1956 G

M-16-18 Linkert hardware kit for 7/8 + 1 brass linkerts. 1930-1936 RL 1932-1956 G 1941-1965 FL 1936-1952 W

CV 3 bolt linkert adapter. 1941-1952 WL 1935-1952 Indian

CV carburetor kit includes a 40mm carburetor cable twist grip set flange adapter and turbo mesh air cleaner. 1970-1987 XL 1966-1984 FL

Natural finish 40mm CV carburetor is for 1340 models and is an accurate reproduction of the Venerable Keihin CV carburetor. Includes two manifold seals one spigot seal and a choke bracket to mount on top of the carburetor cover 1.6 main jet and 0.46 slow jet. Must order related components separately: cables manifold choke cable and air cleaner is not included. *NOTE: Order jet assortment separately. Carburetor includes bracket for dual push-pull throttle and idle cable installation. Early applications will allow use of a single pull throttle installation as the throttle idle
35-0612" CV master carburetor rebuild kit fits 1989-up models with CV carburetors. 1988-2006 XL 1200

Gas tank sender unit. 1997-2000 FLT 1997-2000 FLHT

Gas tank sender unit.

75071-95

1995-UP FLT EFI

Gas tank sender unit. 1988-1995 FLT

High speed carburetor needle valve with large head. 1940-1950 FL

Replica brass Linkert carburetor choke shaft has cam installed. Fits linkert carburetor M-18 M-41 M-42 M-51 M-52 M-54 and M-88. Shaft features 6/32 thread and includes 6/32 x 1/4 fillister head screws. Hole for choke lever screw may have to be enlarged for some applications. 1933-1948 UL 1937-1952 G 1941-1952 W

Air cleaner breather kit features a black finish and fits 1991-2017 Sportster models. 1991-2017 XL

1993-2017 FLT

Natural finish 40mm CV carburetor is for 1340 models and is an accurate reproduction of the Venerable Keihin CV carburetor.
Includes 1.9 main jet and a .046 slow jet installed. Must order related components separately: cables, manifold, choke cable and air cleaner is not included.

*NOTE: This CV carburetor is made with V-Twin MFG.'s exclusive tooling in Taiwan.

OEM Spec. 27492-96

FLH 1985-2007
FLST 1984-2006
XL 1986-2006
FXD 1991-2006
FLT 1988-2007
FXST 1986-2006

1965-1974 FL 1971-1974 FX 1955-1974 XL

3-1/2 Nylon petcock screen for use with male thread petcock. Screen measures 3-1/2 long. 1995-2001 FXST 1995-2001 FLST 1995-2001 FLT 1995-2001 FXD

Plug screw is for Linkert carburetor idle fuel passage constructed of stainless steel and comes in a pack of 5. 1941-1965 FL

Replica Linkert carburetor overhaul kit with 1 1/2 throttle shaft float bowl nut and float lever. 1933-1936 VL 1936-1940 EL 1941-1965 FL 1937-1948 UL 1933-1952 WL

Kit has a black nitrophyl float and a steel needle. Threads on this needle and seat assembly is 7/16 x 27. *NOTE: For the float arm installation the center prong of the float arm should have .003 of clearance in order for the arm and needle to move freely. 1933-1936 VL 1936-1940 EL 1941-1965 FL 1937-1948 UL 1933-1952 WL

Linkert carburetor bowl lock nut has a chrome finish. The nuts are 3/4 X 20 thread. 1941-1984 FL

Black Petcock with straight outlet features 3/8 National Pipe Thread. Includes nylon filter screen washer and reserve position. 1965-1974 FL 1971-1974 FX 1955-1974 XL

Retrofit fuel line kit includes a pre-formed 17 x 5/16 black fuel line needle and seat inlet assembly with 90° swivel fitting hose clamps and a float bowl gasket. Fuel line kit for use upgrading early S&S Super E and G carburetors with a 90° fuel hose. Custom application for S&S Super E and G carburetors

Three bolt style intake manifold featuring a nickel plated finish as the original baby butt style. Detailed casting has original number cast in. Manifold is the exact replica of the original Knucklehead manifold for 61 models. The number cast into the manifold is the casting number. Order nuts and brass seals separately. The brass measures 2-11/16 x 2-1/8 . 1936-1940 EL for 1-1/2 linkert carburetors"

Sifton carburetor idle speed knob features stainless construction with knurls for hand adjustment. Custom application

Linkert service and hardware kit includes a nitrophyl float zinc plated steel screw kit gaskets stainless steel needle and a brass seat. Made of hi-strength nylon. Press in with no reaming necessary. 1936-1952 EL 1941-1965 FL 1936-1956 G 1936-1952 W

Chrome carburetor throttle cable adapter ring directs cable on Tillotson carburetor. Custom application for Tillotson carburetor on Classic models Custom application for Tillotson carburetor on Big Twin models

Nylon bushings for Linkert carburetor throttle. Linkert throttle shaft bushings are constructed of high-strength nylon for ease of installation. Nylon Material: R108-118 N6. Set of 2. 1933-1934 VL 1936-1940 EL 1941-1965 FL 1937-1948 UL 1933-1952 WL

Hose clamp assortment set includes 50 clamps: 20 of 1/2 15 of 5/16 and 15 of 3/8 . Set is a spring type and is designed with a zinc finish. Assortment set includes sizes for oil line applications. Custom application

Power intake clamp set is heavy duty with a stainless steel finish and features a floating bridge . Clamps close the gap under the T bolt for total 360° wrap around seal. Includes O-ring seals. *NOTE: Clamp stud is 1/4 with 28 threads. 1971-1977 FX 1955-1977 FL 1957-1977 XL

CV adjustable choke cable eliminiator features full 360 brass construction. For use with CV Keihin carburetors. This unit will replace the original choke cable on CV Keihin carburetors. This unit features all metal construction body is machined brass. Evos and Big Twin cam installation will require manifold spacing to allow choke knob to clear fins. Overall length is 2 with choke knob extended. Includes new plunger and spring order spacer separately. Easy to install just thread in and go! 1993-UP FX 1993-UP FL 1993-2017 FXD