New products

1995-2016 FLT

Chrome straight fishtails are 32 long with a 1-7/8 diameter featuring scalloped ends. Utilizes welded on channel brackets. Sold in a quantity of 2. Scalloped fishtail end pipes do not have baffles! Order baffles and clamps separately. Fishtails have top brackets welded on. Extension pipes have channel mount brackets that are welded in place. Includes channel mount on top of the pipe to mount like the original. Use existing hardware and clamps for installation. Order replacement T-bolts separately if required. **CAUTION: These exhaust products are not legal for sale or use in C
30-0783" Black straight fishtails are 32 long with a 1-7/8 diameter featuring scalloped ends. Utilizes welded on channel brackets. Sold in a quantity of 2. Scalloped fishtail end pipes do not have baffles! Order baffles and clamps separately. Fishtails have top brackets welded on. Extension pipes have channel mount brackets that are welded in place. Incudes channel mount on top of the pipe to mount like the original. Use existing hardware and clamps for installation. Order replacement T-bolts separately if required. **CAUTION: These exhaust products are not legal for sale or use in Cal
30-0784" Chrome turn out muffler set features a 1-3/4 inlet diameter with a channel mount on the back side for right or left side mounting. The baffles are non-removable because they are welded in place which provides a solid core. 1995-2016 FLT

Black 2 into 1 exhaust lake style header pipes are designed to look like the hot rod side exhausts with 12mm oxygen sensor bungs. Includes heatshield and hardware. Fits forward controls only. The turn out end is 3 in diameter. Header pipes are 1-3/4 with 16 gauge steel construction. Features an 11 outlet. Accepts 12mm oxygen sensor units bungs may be plugged for earlier applications. Will also work on many Rigid Chopper and Bobber models with left side drive.

*NOTE: Does not have baffles.

**NOTE: These pipes will not work with floorboards.

2012-2017 FXST 2012-2017 FXDWG

Chrome 2 into 1 exhaust lake style header pipes are designed to look like the hot rod side exhausts with 12mm oxygen sensor bungs. Includes heatshield and hardware. The turn out end is 3 in diameter. Fits with controls only. Header pipes are 1-3/4 with 16 gauge steel construction. Accepts 12mm oxygen sensor units bungs may be plugged for earlier applications. Will also work on many Rigid Chopper and Bobber models with left side drive.

**NOTE: These pipes will not work with floorboards. Collector is not baffled.

2012-2017 FXST
2012-2017 FXDWG

Custom Application

Black 2 into 1 exhaust lake style header pipes are designed to look like the hot rod side exhausts with 18mm oxygen sensor bungs. Includes heat shield and hardware.
Header pipes are 1-3/4" in diameter. Kit will fit models listed with forward controls. The turn out end is 3" in diameter. Header pipes are 2" with 16 gauge steel construction. Features an 11" outlet. Accepts 18mm oxygen sensor units, bungs may be plugged for earlier applications. Will also work on many Rigid, Chopper, and Bobber models with left side drive.

*NOTE: Does not have baffles.

**NOTE: These pipes will not work with floorboards.

FXDWG 1991-2011
FXR 1986-1994
FXST 1986-2011

True dual crossover exhaust header and muffler kit features an independent crossover exhaust and black tip muffler. Header pipes feature oxygen sensor ports. **Caution: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. 2009-2009 FLT

Slash cut muffler set with black finish. Ends measure 3 in diameter. Mounts using the motorcycle's original hardware. Pipe ends are cut on a side slash. Features removable baffles. 2014-UP XL

Replica chrome front exhaust header pipe Replica exhaust system components are produced by V-Twin's own exclusive tooling. New fixtures and dies are used to manufacture all 4 pieces. Best fittingpipes in the industry period! Replica header pipes are produced with V-Twin's proprietary tooling. Exclusively through Tedd Cycle Inc. 1936-1940 EL 1941-1947 FL

Replica chrome exhaust Y pipe connector has a thickness of 0 .05 and is 15 long overall with a 1-3/4 outer diameter. The Y connector fitting has a 1-3/4 inner diameter. Features an accurate saddle for installing the exhaust system. The saddle of the Y pipe connector tube is attached by brazing. 1958-1964 FL 1958-1964 FLH

1936-1940 EL 1941-1947 FL

Chrome K muffler has a 2-1/2 body diameter 1-3/4 inlet diameter and is 21-1/2 long. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. 1952-1956 K 1952-1956 KH

Black drag exhaust straight pipe set with down draft style has 1-3/4 outer diameter construction for rear application Bracket included that connects the 2 header pipes together does not mount to frame. Pipes feature 18mm oxygen sensor bungs and includes caps if required for non EFI models. Order baffles and flange gaskets separately. Baffle set may require cutting to desired length. A cross bracket connects the front and rear pipe together for added support. *NOTE: 2011-up application will require the separate purchase of V-Twin #32-6578 O2 sensor adapter plugs. *Note: UPS may
30-0741" Chrome cover used on 4 outside diameter mufflers to dress up the stock bracket. 1986-UP XL

Ironhead LAF exhaust header set features a black finish. *NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. 1957-1985 XL

Ironhead LAF style header set features a chrome finish. *NOTE: Pipes attach to each other at the end. Additional mount bracket may be fabricated to mount set to frame. 1957-1985 XL

Wyatt's 2 down draft drag pipe set includes the bracket that connects the 2 header pipes together does not mount to frame. Features a black finish. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1970-1984 FX 1970-1984 FL

Wyatt's 2 down draft drag pipe set includes the bracket that connects the 2 header pipes together does not mount to frame. Features a chrome finish. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1970-1984 FX 1970-1984 FL

Wyatt's 1-3/4 down draft drag pipe set for shovelhead models features a chrome finish. Includes bracket to connect front and rear pipe together. Does not include bracket to attach to frame additional bracket may be fabricated and installed by the customer. Order baffles and flange gaskets separately. Baffle set may require cutting to desired length. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1970-1984 FX 1970-1984 FL

Air cleaner support bracket mount stud kit features zinc plated screws stud washers and nuts. 1966-1978 XL

Drag pipes features a goose style that is chrome finish and includes an oxygen sensor port. These pipes have a 1-3/4 diameter and measure 38 long These pipes may be used on 2004-2006 models if oxygen sensor bungs are capped with a oxygen sensor plug. Pipes mount to stock brackets. Sold in a quantity of 2.

**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only.

2007-2013 XL

Mini exhaust slip-on tip set features a chrome finish with slight turn out ends for a clean look. Can be baffled to act as a short muffler. Sold as a pair. *NOTE: Must order end clamps separately. Custom application

FLT shotgun tail pipe extension set features a black finish with black highlighted ball milled ends These 2-1/4 non-baffled pipes features a 18mm O2 sensor bung. *NOTE: 2012-UP applications will require separate purchase of O2 sensor bung adapter set V-Twin 32-6578. 1996-2016 FLT

FLT shotgun tail pipe extension set features a chrome finish with black highlighted ball milled ends These 2-1/4 non-baffled pipes features a 18mm O2 sensor bung. *NOTE: 2012-UP applications will require separate purchase of O2 sensor bung adapter set V-Twin 32-6578. 1995-2016 FLT

Tapered slip-on muffler set includes removable baffle set. One bolt for a quick removal. Features black finish. Install with stock header pipes. Set of two Superlow XL 883L mufflers will give you a horsepower increase straight out of the box. For performance quality and sound there is nothing else like a V-Twin slip-on muffler! Features dura-chrome processing and baffles wrapped in a high-tech mat designed to disperse heat and retain sound. Engineered through thousands of hours of development and real world application and independently dyno tested to guarantee you the best perf
30-0654" Chrome straight fishtails are 36 long with a 1-7/8 diameter with a flame end. Utilizes channel brackets. Fishtails have top brackets welded on. Sold in a quantity of 2. Extension pipes have channel mount brackets that are welded in place. Includes channel mount on top of the pipe to mount like the original. Use existing hardware and clamps for installation. Order baffles and clamps separately. 1980-2003 XL

Tapered slip-on muffler set includes removable baffle set. One bolt for a quick removal. Features chrome finish. Install with stock header pipes. Set of two superlow XO 883L mufflers will give you a horsepower increase straight out of the box. For performance quality and sound there is nothing else like a V-Twin slip-on muffler! Features dura-chrome processing and baffles wrapped in a high-tech mat designed to disperse heat and retain sound. Engineered through thousands of hours of development and real world application and independently dyno tested to guarantee you the best per
30-0648" Trumpet end muffler is 16 overall and features a black finish and a universal strap for mounting. Inner Diameter measures 1-3/4 . **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway use only. 1980-2003 XL

0-All models with 1-3/4 pipes"

Tapered muffler set with slotted track chrome end clamps and strap mounting features a black finish. Mufflers include embossed speed lines a Wyatt Gatling exclusive! **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for no
30-0642" Tapered muffler set with slotted track chrome end clamps and strap mounting features a chrome finish. Mufflers include embossed speed lines a Wyatt Gatling exclusive! **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for n
30-0643" Black 12 shorty slip on muffler has a 1-3/4 diameter. 0-All models with 1-3/4 pipes"

Chrome crossover exhaust header system for use with existing heat shields from OE system features removable baffles. The rear pipe goes under the frame as original. Header system features full true dual header set and 3.5 chrome mufflers. Kit includes taper valves valve seals and muffler clamps. For use with original heat shields. Order replacement T-bolts separately if required. 2010-2016 FLT

Chrome replica style exhaust header set for Solo WL and WLA models. Front pipe does not include welded tab bracket. Chrome 45 front header pipes shows indents due to tooling marks during production. 1937-1952 WL 1937-1973 G 1937-1952 WLA

V-slot baffle set is 14-1/16 long and features improved baffling and back pressure. Sold in a quantity of 2. Set is replacement for Screamin Eagle slip on mufflers. Installed on FXD FXST and XL models. *Baffle diameter denotes the size of the pipe into which it fits. 0-Replacement application

Smooth type torque tube baffle set features improved baffling and back pressure. Sold in a quantity of 2. Set is replacement for Screamin' Eagle slip on mufflers installed on FXD FXST and XL models.

*Baffle diameter denotes the size of the pipe into which it fits.

Replacement application

Chrome crossover exhaust header system with bracket included. Features removable baffles. Accepts oxygen sensor. For use with original heat shields. Order replacement T-bolts separately if required. 2009-2009 FLT

1984-2006 FXST

True dual crossover exhaust header pipes use original heat shields and clamps. Accepts 18mm oxygen sensors. Header pipes are used with 1-3/4 diameter mufflers and accepts 18mm oxygen sensors. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2009-FLT