V-Twin Manufacturing

Black 2 into 1 exhaust lake style header pipes are designed to look like the hot rod side exhausts with 18mm oxygen sensor bungs. Includes heat shield and hardware.
Header pipes are 1-3/4" in diameter. Kit will fit models listed with forward controls. The turn out end is 3" in diameter. Header pipes are 2" with 16 gauge steel construction. Features an 11" outlet. Accepts 18mm oxygen sensor units, bungs may be plugged for earlier applications. Will also work on many Rigid, Chopper, and Bobber models with left side drive.

*NOTE: Does not have baffles.

**NOTE: These pipes will not work with floorboards.

FXDWG 1991-2011
FXR 1986-1994
FXST 1986-2011

Black drag exhaust straight pipe set with down draft style has 1-3/4 outer diameter construction for rear application Bracket included that connects the 2 header pipes together does not mount to frame. Pipes feature 18mm oxygen sensor bungs and includes caps if required for non EFI models. Order baffles and flange gaskets separately. Baffle set may require cutting to desired length. A cross bracket connects the front and rear pipe together for added support. *NOTE: 2011-up application will require the separate purchase of V-Twin #32-6578 O2 sensor adapter plugs. *Note: UPS may
30-0741" Chrome cover used on 4 outside diameter mufflers to dress up the stock bracket. 1986-UP XL

Wyatt's 2 down draft drag pipe set includes the bracket that connects the 2 header pipes together does not mount to frame. Features a black finish. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1970-1984 FX 1970-1984 FL

Drag pipes features a goose style that is chrome finish and includes an oxygen sensor port. These pipes have a 1-3/4 diameter and measure 38 long These pipes may be used on 2004-2006 models if oxygen sensor bungs are capped with a oxygen sensor plug. Pipes mount to stock brackets. Sold in a quantity of 2.

**CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only.

2007-2013 XL

Chrome Monster drag exhaust pipe set features straight cut ends. Pipes have a 2-1/4 outer diameter and mount to stock brackets. Sold in a quantity of 2. Order baffles and hardware separately. Wyatt Gatling exhaust set features Quad finishing which includes triple dura nickel and chrome as the final finish. After chrome plating pipes are normalized and dried at 572° fahrenheit for the final finish process. *NOTE: Does not work with floorboards. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intend
30-0552" Chrome Monster drag exhaust pipe set features down slash shorty ends. Pipes have a 2-1/4 outer diameter and mounts to stock brackets. Sold in a quantity of 2. Hardware is included. Order baffles and mounting bracket separately. Radii exhaust set features Quad finishing which includes triple dura nickel and chrome as the final finish. After chrome plating pipes are normalized and dried at 572° fahrenheit for the final finish process. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-
30-0556" Chrome Monster drag exhaust pipe set features side cut ends. Pipes have a 2-1/4 outer diameter and mounts to included stock brackets. 1984-2006 FXST

1948-1965 FL

Chrome 24 Flash Gordon fishtail baffled muffler with 2-1/2 diameter to fit 1-3/4 pipes. **CAUTION: These exhaust products are not legal for sale or use in California on pollution controlled vehicles. These products are intended for non-highway only. Custom application for 1-3/4 exhaust pipes"

Grenade muffler set features a 1-3/4 inner diameter inlet with a chrome finish. Has a channel mount to accept T bolts for mounting. Sold as a pair. *NOTE: Order bolt set separately. Custom application

Curved radius 2 drag pipe set features a black finish and slash cut ends This 2 drag pipe set features 8mm O2 sensor bungs. *NOTE: 2011-2017 applications will require the separate purchase of V-Twin #32-6578 O2 sensor adapter plugs. 2007-2017 FXST

Radius exhaust header set features a black finish and a 2 diameter 2007-UP XL

Black Wyatt Gatling 1-3/4 2 into 1 exhaust header set is a one piece design featuring a turn out collector and includes form fitting heat shield set. The turn out end is 3 in diameter. Has 12mm oxygen sensor bungs but may be capped off if not required. Pipe set does not have baffles. 2014-UP XL

1986-UP XL

FLT 2:1 lake style exhaust system with a tapered megaphone muffler end features a chrome finish. Billet tip cap finishes the end of the muffler chamber Includes mounting hardware and can be used with footboards. Megaphone end is at a 45° angle and is baffled. ***NOTE: Pipes are without oxygen sensor bungs. *NOTE: Header pipes do not includes heat shields and are not available for purchase. 1995-2006 FLT

Valve is a replacement for mag style tubeless tire rims. Use as required by factory number. Valve is Chrome angle type. Custom application for mag style tubeless tire rims

3 piece rubber clutch and brake pad set includes one for brake rod two for the rocker clutch assembly. 1936-1952 EL 1941-1951 FL

Replica of the original Beck hard plastic grips are black with ribbed design. This longer version is 5-1/4 and may be cut down for shorter control spirals. For use on Harley or Indian models. Grips are 5-1/2 long with a 1-1/8 inner diameter. There is a line at 4-1/4 to shorten if required. Grips will install on 1936-52 Indian Chiefs! 1915-1935 J 1936-1948 W 1941-1948 FL 1936-1948 EL

Throttle by wire amber flame style grip set with chrome ends. Sold as a pair. 2008-UP FLT 2016-UP FXST 2016-UP FLST

Rear shock dust boot set features rubber accordion type construction. Sold as a pair. 1997-2012 FLT

Black rubber brake pedal pad with FLH logo has a molded slot which allows it to slide onto the steel pedal. 1936-1940 EL 1941-1984 FL

Bolt and o-ring for fork tube. 1984-2001 FLT

Billet aluminum large diameter female mount footpeg set with four groove design features a sliver anodized finish. Set of two. 0-All models with male mounting block

Billet aluminum large diameter male mount footpeg set with four groove design features a sliver anodized finish. Set of two. *NOTE: These will not fit passenger on 2018-up Softail models. 0-All models with female mounting block

This kit repositions the footpegs and foot controls up and back by 2 and positions the controls closer to the rider for added comfort with black mounting plates and brake rod. This kit is easy to install and comes with heavy duty steel mounts and shortened brake rod. Kit reuses original control supports and brake/shift levers. The reduced reach forward control kit places the rider's boot at the proper pivot point for improved leverage while maintaining the foot forward riding profile.
The shift rod length is 13-5/16" including threads.

*NOTE: Provides additional leg clearance around the chassis and air cleaner by moving the footpegs outward 1.5" (left) and 0.5" (right).

2004-UP XL

Chrome passenger footboard support kit. For use with OEM type passenger footboards. *NOTE: Cannot be installed with shotgun exhaust. 2008-2017 FLST 2008-2017 FXST

Black passenger footpeg mount bracket set adjusts to 3 height positions. Replaces stock rear footboards. Order male pegs separately. 1993-UP FLT

M8 passenger footpeg set is made of billet aluminum and features a chrome finish. 2018-UP FLT M8 models

Replica black chain guard is FLH style and is for swingarm frames. 1958-1962 FL

Handlebar lever set with a black finish. 2014-2016 FLT

Speed freak handlebar riser set features a gloss black finish and is 1-3/4 tall for 1 handlebars. Uses 1/2 -13 mounting bolts. *NOTE: Bolts not included. Custom application for 1 handlebars"

Chrome allen head screws have a smooth head to replace the original fasteners on S&S Super E and G carburetors. 0-Replacement application for Super E" and "G" Carburetors"

Clutch hub nut kit. 1941-1984 FL

Chrome 1 handlebar with 10 rise. These bars are slotted and drilled for internal wiring and is notched for throttle by wire application. A thin guide wire is included to assist with guiding the wires through the handlebars. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs.

1982-1984 FL 1982-1984 FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-1994 FXR 1991-2017 FXD

1 black handlebars are made from heavy steel tubing with 2 knurl spacing. These are drilled for wire clips and have indents for external wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1982-UP XL 1984-2017 FXST 1986-2017 FLST 1982-1994 FXR 1991-2017 FXD 1982-2007 FLT

1 black handlebars are made from heavy steel tubing with knurl spacing 2 inches apart. These have wire holes but are not drilled for internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-1994 FXR 1991-2015 FXD 1982-2007 FLT