V-Twin Manufacturing

V-Twin Manufacturing 7" Headlamp Ring Rim Contoured Style Chrome, 1983-Up, 69604-03 - Sold Each

Chrome contoured rim is used on 7" diameter shells.

OEM: 69604-03

FLT 1983-UP
FLHR 1994-UP

V-Twin Manufacturing Velva-Ride Engine Stabilizers Chrome - Sold Each

Chrome Velva Ride engine stabilizer features a steel body with plunger and urethane dampener that creates a mini shock absorber.

FLT 1979-2008
FXD 1991-UP
FXR 1982-1994

Measurements:

Between Eyelets: 4-1/2"
Eyelet Diameter

V-Twin Manufacturing Rubber Mount Bushing-Swing Arm Rebuild, FLT-FXR, 1987-02 - Sold Each

Swingarm rubber mount bushing

OEM: 47564-86B

FLT 1987-2008
FXR 1987-1994

V-Twin Manufacturing Slash Style Tips for 3-1/2" Muffler, 65067-01 - PR

Chrome billet slash style end caps fit stock 3-1/2" outside diameter mufflers.
Sold in a quantity of 2.
OEM: 65067-01

Replacement application for custom pipes

Tech Note:

Suggested to use with #30-0600 muffler set.

V-Twin Manufacturing Dash, Chrome, Rubber Trim Strip, 1982-83 FXR, 1984-87 FXRS, FXRT, 1986 FXRD, 1987-92 FXR, FXRT, FXRS-SP, FXRS-CON - Sold Each

Rubber dash trim strip.

OEM: 61117-86

FXR 1982-1983

V-Twin Manufacturing Footpeg Support Extension Kit, Chrome, 2 - Set

Chrome 2-3/4" long passenger yoke set with pins have an unthreaded 3/8" inner diameter frame mount hole and accepts 5/16" footpeg mount hole.
Use with 3/8" allen cap bolt.
OEM: 51039-05

Custom application utilizes a 3/8" mounting hole

V-Twin Manufacturing Adjustable Kickstand Chrome with Hidden Spring, FXR 1982-1994 - Sold Each
Adjustable Kickstand Chrome with Hidden Spring Chrome adjustable kickstand with hidden spring. Mount holes are 4-1/8" center to center and kickstand adjusts from 8" to 9-3/4". This kickstand has a adjustable length and features a heavy dut

V-Twin Manufacturing Brake Plunger Rod, Chrome, 92-02 FXDWG - Sold Each

Chrome rear brake rod is 22-1/2" long.

OEM: 41955-93

FXDWG 1992-2002

V-Twin Manufacturing Dura Soft Orangeanic Disc Brake Pad Set, Performance Machine, 125x4S - Set

Dura soft brake pad set of 4.

Special application for GMA Model "F" Caliper
Special application for Jaybrake Small 2-Piston Caliper
Special application for Performance Machine 125 x 2 Caliper
Special application for Perfor

V-Twin Manufacturing Mid Shifter Lever Retainer Chrome - Pack
Mid Shifter Lever Retainer Chrome Chrome retainer will secure inner primary shift lever when installing forward controls. Fits: Custom application for forward controls UOM: 10 - PK Country of Origin: Imported

V-Twin Manufacturing Heel Toe Shift Lever, 1986-up FLT - Sold Each
FLST-FLT Heel Toe Shift Lever.

V-Twin Manufacturing 91-05 FXD forward Control Shift Rod Kit , Standard - Kit
Shift rod for forward control (standard length) fits 1991-05 FXD.

V-Twin Manufacturing BT Final Belt Drive Tool - Sold Each
Final Drive Tool fits final drive pulley, so the nut can be properly set to torque specifications. Type: BT

V-Twin Manufacturing Timken Bearing Sleeve, 34822-08 - Sold Each
OEM No: 34822-08 Converts 2003-up TC-88 models from a roller bearing to a Timken tapered bearing. Bearing is sold separately. Fits: FXST 2003-UP FLST 2003-UP FLT 2003-UP FXD 2003-UP UOM: 1 - EA Coun

V-Twin Manufacturing Amp Socket Wiring Housing 4 Position, OEM 73154-96BK - Set
Amp Socket Wiring Housing 4 Position OEM No: 73154-96BK Amp socket wiring housing is 4 position type. Fits Harley-Davidson models: All models UOM: 1 - SET Country of Origin: USA

17" X 4.5" Replica rear wheel features a chrome rim, 40 chrome spokes and a chrome hub.
FXR applications must use seal spacers. Uses a center metal valve inner tube **NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation.
17" X 4.5" Replica rear wheel features a chrome rim, 40 chrome spokes and a chrome hub. FXR applications must use seal spacers. Uses a center metal valve inner tube **NOTE: All spokes on wheel need to be ins

FXR 1986-1996
FLST 1986-1996
FXDG 1991-1996
FXRS 1986-1996
FXSTC 1986-1996
FXST 1986-1996

V-Twin Manufacturing Front Engine Bar, 1 , 1984-94 FXR - Sold Each

Engine bar features 1-1/4" tubing.
WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to provide protectio

V-Twin Manufacturing Front Engine Bar 1 ", 1991-05 FXD Dyna - Sold Each

Engine bar features 1-1/4" tubing.
Not for use with forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped,

V-Twin Manufacturing Rigid Bob Fender Brace Chrome. - Sold Each

Rigid bobbed fender mount brace is chrome with preformed bends of heavy 1/4" steel. For use with a 5" or 6" fender.

Custom application for bobbed fender.

Measurements:

Top Width: 5-7/16

Width: 9-1/4"

Bottom Width: 9-1/4"

Bottom Mounts O.D.: 10-5/8"

Bottom Mounts I.D.: 10-1/8"

Bar: 1"

Top of Bar O.D.: 6"

Top of Bar I.D.: 5-9/16"

Top Width: 5-7/16
Width: 9-1/4"

Strutless rear fender is 2mm thick and has a width of 12.75" and constructed of steel. Fender will cover 280-300 series tire.
Let V-TWIN help you with that wide tire conversion. These strutless rear fenders will fit over the new tire and attach to the stock width frame. Fender will bolt to frames 11" wide where strut mounts. The width of the inside of the fender where it ataches to the frame measures 12-1/4". The stock strut supports must be removed from the frame. We suggest pre fitting the fender prior to painting. Position cut drill mount holes as required.

Strut Outer Width: 13-3/4"

Fender Inner Width: 12-1/2"

Fender Outer Width: 13-1/8"

Strut Inner Width: 13"

Strut Outer Width: 13-3/4"

Left side black plastic saddlebag lid with round hole cutout for the lock.
Lid is Pre-drilled and pre-fit for ease of installation. The process of injection creates smooth inside and outside surfaces. All pieces are constructed of black fiberglass and reinforced FRP plastic, ready for primer and paint. FRP is made up of polyphenylene oxide/polyamide alloy. Order gasket and hinge set separately.
OEM No: 90757-85 Left side saddlebag lid has a primed finish, ready for paint . Lid has a round hole cut out for the lock. Order gasket and hinge set separately. Pre-drilled and pre-fit for ease of instal

FLT 1985-1992

V-Twin Manufacturing Oil Tank Decals H Bar(Adhesive) - 5 Pack

This adhesive type oil tank decal is "H" long style.

OEM: 62535-65

All models

Measurements:

Length: 3-1/4"
Width: 1"

V-Twin Manufacturing Rear Drum Bearing Kit, 1991-99 XL - Kit

Rear wheel hub bearing kit includes two bearings, center spacer and spacers.
Rear double row fit wheel bearing kits for models with bearings to eliminate wheel play. Use with a stock 3/4" axle. Bearing has an outer diameter of 1.782", and inner diam

V-Twin Manufacturing Swing Arm Kit, FXR-FLT, 1982-02 - Kit

Kit includes two bushing assemblies, spacers, plastic retain er rings, plastic dust covers, rubber isolators, and one piv ot shaft with locknut and sleeve.
Includes all parts to mount transmission and swingarm to pivot block.

FXR 1982-1994

V-Twin Manufacturing Rear Axle Adjuster 3/4" Inner Diameter fits FXR 1984-1991 - Set
Rear Axle Adjuster 3/4" Inner Diameter Rear axle adjuster has a 3/4" inner diameter and includes heavy pull blocks and two 1/4"-20 x 2" full thread allen cap screws. Fits Harley Davidson models: FXR 1984-1991 Rear Fitment

V-Twin Manufacturing Chrome Outer Primary Cover fits FXD 2006-UP,60764-06 - Sold Each
Chrome Outer Primary Cover OEM No: 60764-06 Chrome outer primary cover. Order screw kit separately. Fits Harley-Davidson models: FXD 2006-UP UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing Chrome Outer Primary Cover fits XL 2004-2006, 25460-04 - Sold Each
Chrome Outer Primary Cover OEM No: 25460-04 Chrome outer primary cover Fits: XL 2004-2006 UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing 4"x7" License Plate Frame Chrome Billet, LED Top Lamp - Sold Each

Chrome billet frame with mini LED top lamp. Unit is a brake and tail lamp combo with 3 wires.

Custom application for 4" x 7" license plates

V-Twin Manufacturing Chrome, Flame, Inspection, Cover - Sold Each
Chrome flame inspection cover. Screws included. Fits: Harley Davidson Models FL 1999-UP FX 1999-UP UOM: 1 - EA Country of Origin: Imported

V-Twin Manufacturing Bobbed Dash, Switch Name Plate, 1994-up ST - Sold Each

Dash cover switch name plate.

OEM: 71302-93A

FXST 1994-UP
FLST 1994-UP