V-Twin Manufacturing

V-Twin Manufacturing Brake Plunger Rod, Chrome, 92-02 FXDWG - Sold Each

Chrome rear brake rod is 22-1/2" long.

OEM: 41955-93

FXDWG 1992-2002

V-Twin Manufacturing Dura Soft Orangeanic Disc Brake Pad Set, Performance Machine, 125x4S - Set

Dura soft brake pad set of 4.

Special application for GMA Model "F" Caliper
Special application for Jaybrake Small 2-Piston Caliper
Special application for Performance Machine 125 x 2 Caliper
Special application for Perfor

V-Twin Manufacturing Mid Shifter Lever Retainer Chrome - Pack
Mid Shifter Lever Retainer Chrome Chrome retainer will secure inner primary shift lever when installing forward controls. Fits: Custom application for forward controls UOM: 10 - PK Country of Origin: Imported

V-Twin Manufacturing Heel Toe Shift Lever, 1986-up FLT - Sold Each
FLST-FLT Heel Toe Shift Lever.

V-Twin Manufacturing 91-05 FXD forward Control Shift Rod Kit , Standard - Kit
Shift rod for forward control (standard length) fits 1991-05 FXD.

V-Twin Manufacturing BT Final Belt Drive Tool - Sold Each
Final Drive Tool fits final drive pulley, so the nut can be properly set to torque specifications. Type: BT

V-Twin Manufacturing Timken Bearing Sleeve, 34822-08 - Sold Each
OEM No: 34822-08 Converts 2003-up TC-88 models from a roller bearing to a Timken tapered bearing. Bearing is sold separately. Fits: FXST 2003-UP FLST 2003-UP FLT 2003-UP FXD 2003-UP UOM: 1 - EA Coun

45" WL frame and fork kit includes a replica 45" W rigid frame, a black 28" inline Spring Fork assembly and a zinc fork neck cup set.
The stock replica Spring Fork assembly accepts all original style components and accessories for a detailed restoration look. The 45 rockers are mounted in board of the fork legs and accepts a 3/8" diameter axle. The replica 45 W stock style rigid frame with brazed joints features a raw finish. There's no Manufacturer's Statement of Origin, only a Bill of Sale. Don't forget the pre-assembly procedure! Before primer and paint, the frame will require de-greasing. Frame accepts 3 bolt transmission case. Top frame tube has threaded inserts to attach center tank panels. Threads are for bolt set. Assembly includes inner and outer springs, front and rear legs, spring rod with bushings and internal brake wheel with all studs and bearings. Top clamp, neck races and cone nut are not included. *Note: UPS may consider this part as packaged "oversize" for shipment, as compared to the actual weight, which will result in higher shipping costs.

Fits:

WL 1936-1952

Black rear 16 X 5 wheel rim. Our spoke set with 20 short and 20 long shank spokes can be used. This rim has a small center valve stem hole to accept metal stems.
Requires the separate purchase of a spoke set VT-45-0946.

2009-UP FLT

This guard offers a slim low profile design that retains function while delivering unique styling. 1-1/4 diameter features a slightly forward sweep that provides plenty of room around the brake and shift lever. Fits 2014-up Touring models except Road Glide and models equipped with fairing lowers. Requires separate purchase of additional mounting hardware not included with bar. 2014-UP FLT 2014-UP FLHT

Touring battery side cover pin screws into original side covers. 1997-UP FL

10 Pack

Indian Scout solo seat includes a black leather seat and a solo seat mount kit with chrome finished springs and black components *NOTE: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2015-UP Scout 0-All solo seats

Chrome steel with black mesh 3 hole outer primary derby cover. 1970-1984 FL 1971-1984 FX 1984-1984 FXST 1985-1998 FXST 1986-1998 FLST 1984-1984 FLT 1985-1998 FLT 1991-1998 FXD 1984-1984 FXR 1985-1994 FXR

Set of chrome die cast Electra Glide emblems for the right and left side of the front fender. Order mount clips separately. 1965-1984 FL

Black petcock adapter fitting for Sportster tanks with a petcock mount allows the use of EFI fuel tanks on carbureted models or allows the conversion of EFI models to be able to install carburetors. Easily replaces the EFI fuel pump mount in gas tank comes ready to install with seal CNC machined mount plate and threaded petcock bung included. 2007-UP XL

Flanders linkert carburetor bracket. Order spring and shaft activator separately. 1948-1965 FL

Velocity air cleaner stud set. 0-Replacement application for velocity air cleaner

This black visor style trim rings recesses the headlamp into the housing and adds a traditional eyebrow design to the headlamp shell. Stretches the profile of the bike for a long lean appearance. 2004-UP XL 883/883L/883N/883R/1200L/1200N/1200R/1200T/1200X/1200XS 2016-UP XL 1200CX 1994-2017 FXD 1994-2015 FXLR 1994-2015 FXST 1994-2015 FXSTB 2008-2017 FLSTSB 2008-2017 FXS 2016-2017 FXSE 1994-1999 FXSTC

Baffle pipe set fits inside drag pipes. 1-1/2 denotes the size of the pipe into which the baffle fit. Baffle is 8 long and the baffle outer diameter is 1.37 . Set comes in fiberglass packing Custom

Grenade muffler set features a 1-3/4 inner diameter inlet with a black finish. Has a channel mount to accept T bolts for mounting. Sold as a pair. *NOTE: Order bolt set separately. Custom application

Chrome Wyatt Gatling 1-3/4 2 into 1 exhaust header set is a one piece design featuring a turn out collector and form fitted heat shield set. The turn out end is 3 in diameter. Has 12mm oxygen sensor bungs but may be capped off if not required. Pipe set does not have baffles. 2014-UP XL

Black 1-1/4 handlebar features throttle by wire right side notches and has holes with a copper wire inside for pulling thru internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2014 FLTR

This kit positions the feet 1 closer to the rider then the stock FXD forward control position placing the rider's boot at a comfortable pivot point for improvised support and leverage. FXD application requires separate purchase of the forward control kit. *NOTE: Fits 2006-17 Dyna models equipped with forward controls. 2006-2017 FXD forward controls 2006-2017 FXDWG

Stainless steel heel toe shifter lever is a one piece design for 5-speed models with mid controls. Includes 2 rubbers. 1982-1994 FXR

Solo high torque 32 tooth solid steel compensator kit is spring less much quieter than stock or diaphragm spring style compensators. Eliminates the need for a complete compensator assembly. Kit includes solid compensator spacers center bolt and chain tensioner shoe. *NOTE: The stock 34 tooth chain tensioner shoe will not work with the 32 tooth kit it requires a custom tensioner shoe so we have included the custom chain adjuster shoe and center bolt in the kit for easier installation. 2006-2006 FXD 2007-2016 FLT 2007-2017 FLST 2007-2017 FXST

Jims camshaft needle bearing remover and installer tool is required for correct and accurate replacement of the camshaft inner needle bearing for M8 models. This tool holds tighter tolerances which allows for a more precise installation depth. *NOTE: This remover uses the Jims Style remover collet as well as Jims fine threaded installation driver. A new removal holes works as a window to let you see what you're doing while using the tool. 2017-UP FLT 2018-UP FLST 2018-UP FXST

V-Twin Manufacturing Amp Socket Wiring Housing 4 Position, OEM 73154-96BK - Set
Amp Socket Wiring Housing 4 Position OEM No: 73154-96BK Amp socket wiring housing is 4 position type. Fits Harley-Davidson models: All models UOM: 1 - SET Country of Origin: USA

17" X 4.5" Replica rear wheel features a chrome rim, 40 chrome spokes and a chrome hub.
FXR applications must use seal spacers. Uses a center metal valve inner tube **NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation.
17" X 4.5" Replica rear wheel features a chrome rim, 40 chrome spokes and a chrome hub. FXR applications must use seal spacers. Uses a center metal valve inner tube **NOTE: All spokes on wheel need to be ins

FXR 1986-1996
FLST 1986-1996
FXDG 1991-1996
FXRS 1986-1996
FXSTC 1986-1996
FXST 1986-1996

V-Twin Manufacturing Front Engine Bar, 1 , 1984-94 FXR - Sold Each

Engine bar features 1-1/4" tubing.
WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped, very low speed slide). They are not made nor intended to provide protectio

V-Twin Manufacturing Front Engine Bar 1 ", 1991-05 FXD Dyna - Sold Each

Engine bar features 1-1/4" tubing.
Not for use with forward controls. WARNING: This engine/frame bar may provide limited leg and cosmetic vehicle protection under unique circumstances (fall over while stopped,

V-Twin Manufacturing Rigid Bob Fender Brace Chrome. - Sold Each

Rigid bobbed fender mount brace is chrome with preformed bends of heavy 1/4" steel. For use with a 5" or 6" fender.

Custom application for bobbed fender.

Measurements:

Top Width: 5-7/16

Width: 9-1/4"

Bottom Width: 9-1/4"

Bottom Mounts O.D.: 10-5/8"

Bottom Mounts I.D.: 10-1/8"

Bar: 1"

Top of Bar O.D.: 6"

Top of Bar I.D.: 5-9/16"

Top Width: 5-7/16
Width: 9-1/4"

Strutless rear fender is 2mm thick and has a width of 12.75" and constructed of steel. Fender will cover 280-300 series tire.
Let V-TWIN help you with that wide tire conversion. These strutless rear fenders will fit over the new tire and attach to the stock width frame. Fender will bolt to frames 11" wide where strut mounts. The width of the inside of the fender where it ataches to the frame measures 12-1/4". The stock strut supports must be removed from the frame. We suggest pre fitting the fender prior to painting. Position cut drill mount holes as required.

Strut Outer Width: 13-3/4"

Fender Inner Width: 12-1/2"

Fender Outer Width: 13-1/8"

Strut Inner Width: 13"

Strut Outer Width: 13-3/4"

Left side black plastic saddlebag lid with round hole cutout for the lock.
Lid is Pre-drilled and pre-fit for ease of installation. The process of injection creates smooth inside and outside surfaces. All pieces are constructed of black fiberglass and reinforced FRP plastic, ready for primer and paint. FRP is made up of polyphenylene oxide/polyamide alloy. Order gasket and hinge set separately.
OEM No: 90757-85 Left side saddlebag lid has a primed finish, ready for paint . Lid has a round hole cut out for the lock. Order gasket and hinge set separately. Pre-drilled and pre-fit for ease of instal

FLT 1985-1992