Vintage Magneto

V-Twin Manufacturing Magneto Coil fits 1958-1969 XLCH 29524-55A - Sold Each

This magneto coil fits Fairbanks Morse and most aftermarket units. Coil is 12 volt and has high output.
**NOTE:Check the coil primary resistance requirements from the manufacturers of the ignition being used.
OEM: 29524-55A

XLCH 1958-1969

V-Twin Manufacturing Ignition Points and Condenser Kit 1958-1969 XLCH - Kit

Ignition points and condenser kit does not include replacement spark plugs.
Replacement spark plugs are not included.

XLCH 1958-1969 with magneto installed

V-Twin Manufacturing Magneto Coil Contact Springs, 10 pk - Pack

Magneto coil contact springs fit Fairbanks Morse and most after market units.

OEM: 29560-55

XLCH 1958-1969

V-Twin Manufacturing Regulator Cover, Chrome, Module Type, 1980-up - Sold Each

Regulator cover for module with chrome finish.

FL 1980-1984
FX 1980-1984
XL 1980-1981
FXST 1984-1999
FXR 1982-1994
FLST 1986-1999

V-Twin Manufacturing Large Ignition Capacitor fits 1958-1970 XLCH - Sold Each
Motorcycle Replica Horn Capacitor OEM No: 32727-63 Large 500 MFD, 25 VDC ignition capacitor regulates light intensity. It has a positive wire lead and the case is grounded. The case measures 1" in diameter x 2-1/4" long with mounting screw

V-Twin Manufacturing Joe Hunt H4 Automatic Advance Magneto, 1970-92 Natural - Sold Each

Automatic advance vertical magneto features H-4 automatic advance for easier starting and hotter spark, natural aluminum cam cover, and rare earth magnets that never need to be recharged.
No frame, pipe or brake pedal modifications are required. Cam

V-Twin Manufacturing Joe Hunt H4 Automatic Advance Magneto, 1970-92 Polished - Sold Each

Automatic advance vertical magneto features H-4 automatic advance for easier starting and hotter spark, polished aluminum cam cover, and rare earth magnets that never need to be recharged.
No frame, pipe or brake pedal modifications are required.

V-Twin Manufacturing Magneto Adapter Plate fits 1962-1970 XL - Sold Each

Magneto base adapter plate is for Fairbanks Morse, Joe Hunt, and Morris magnetos. Plate bolts directly to cast base.
Plate includes two screws.
OEM: 29600-62

XLCH 1958-1964

V-Twin Manufacturing Magneto Black Top Cover 1958-1969 XLCH - Sold Each

Magneto black top cover.
Top cover fits Fairbanks Morse and most aftermarket units. Gasket and hardware sold separately.
OEM: 29530-55A

XLCH 1958-1969

V-Twin Manufacturing Clear Magneto Top Cover w/Gasket/Screw, #B - Kit

Magneto clear top cover includes gasket and screws.
Top cover fits Fairbanks Morse and most aftermarket units.

XLCH 1958-1969

V-Twin Manufacturing Cadmium Magneto Lower Adapter Plate, 1965-1970 XL - Sold Each

Magneto lower adapter plate features zinc finish. Adapter plate fits Morris Fairbanks-Morse or Joe Hunt units.
Adjuster screws not included.
OEM: 29604-65

XL 1957-1970

V-Twin Manufacturing Magneto Upper Adapter Plate, 1965-1970 XL - Sold Each

Magneto base adapter plate fits Morris, Joe Hunt, or Fairbanks Morse magnetos. Adapter is zinc plated.

OEM: 29600-65C

XLCH 1965-1969

V-Twin Manufacturing Magneto Zinc Control Arm Fits: XLCH 1965-1970 - Sold Each

Zinc magneto control arm is for Fairbanks Morse and most aftermarket units.

OEM: 29607-65

XLCH 1965-1969

V-Twin Manufacturing James Magneto Cap Top Gasket - Pack
IGNITION Cover/DISTRIBUTOR BASE Fits: Magneto Cap

V-Twin Manufacturing Magneto Cap Gaskets 10Pk - Pack

Magneto cap paper gaskets

OEM: 29550-55

XLCH 1958-1969