Vintage Oil Line Fittings

V-Twin Manufacturing SS Braided Hose 5-16x25 - Sold Each

This braided, stainless steel non reinforced hose is 5/16" x 25', and can be cut to length as needed. Be sure to use Econo seal ends, or hose clamps to attach to fitting.
Add some flare to your V-Twin by replacing your stock rubber hose lines with

V-Twin Manufacturing Braided Stainless Hose 3-8" x 25' - Sold Each

This braided, stainless steel reinforced hose is 3/8" x 25', and can be cut to length as needed. Be sure to use Econo seal ends or hose clamps to attach fitting.
*WARNING: Not for use in brake systems

Custom application

V-Twin Manufacturing 3-8 Chrome Smooth Hose End, 2 Peice - Set

The smooth 5/8" Econo seal hose end acts as a clamp and finished end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end. Fits 5/8" outer diameter hose.

Custom application for 3/8" f

V-Twin Manufacturing 1-4" Chrome Smooth Hose End, 2 Peice - Set

The smooth 1/4" Econo seal hose end acts as a clamp and finished end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end.

All models

V-Twin Manufacturing 3-8 Chrome Smooth Hose End, 6 Peice - Pack

The smooth 3/8" Econo seal hose end acts as a clamp and finished end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end.

Custom application for 3/8" fuel line

V-Twin Manufacturing Chrome Econo End,13-16" Id - Set

This 13/16" inner diameter Econo seal hose end acts as a clamp and finished end for stainless jacketed rubber hose. A micro clamp is hidden under the chrome end.

Custom application for 13/16" fuel line

V-Twin Manufacturing Pair,Chrome Econo Seal Hose End (3-8) - Set

This hex, 5/8" Econo seal hose end acts as a clamp and finished end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end. Fits 5/8" outer diameter hose.

Custom application for 3/8" fu

V-Twin Manufacturing 3-8" Chrome Hose Ends (6) - Pack

This hex, 3/8" Econo seal hose end acts as a clamp and finished end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end.

Custom application

V-Twin Manufacturing 1-4" Chrome Hose Ends (6) - Pack

This 1/4" hex Econo seal hose end acts as a clamp and finish end when the stainless jacket rubber hose is cut and attached. The micro clamp is hidden under the chrome end.

All models

V-Twin Manufacturing Braided Stainless Hose 3-8" x 10' - Sold Each

This braided, stainless steel, non reinforced hose is 3/8" x 10', and can be cut to length as needed. Be sure to use Econo seal ends, or hose clamps to attach to fitting.
*WARNING: Not for use in brake systems

Custom application

Measurement

V-Twin Manufacturing Braided SS Hose, 5-16" x 5' Length - Sold Each

This braided, stainless steel, non reinforced hose is 5/16" x 5', and can be cut to length as needed. Be sure to use Econo seal ends, or hose clamps to attach to fitting.
*WARNING: Not for use in brake systems.

All models

V-Twin Manufacturing Banjo Bolt Washer,Feed - Pack

Washer is for feed oil line banjo fitting bolt.

OEM: 3570-36B

G 1936-1973
WL 1936-1952

Measurements:

Front Width: 4"
Rear Width: 13-3/4"
Pad Thickness: 1"
Length: 16"

V-Twin Manufacturing Motorcycle Fuel-Oil Hose, reinforced, black fuel oil hose comes in a 1/2" x 25' - FT

This reinforced, black fuel oil hose comes in a 1/2" x 25' shop roll.

OEM: 63553-91

All models

V-Twin Manufacturing Fuel-Oil Line, Black, 3-8" x 25Ft Roll - Sold Each

This reinforced, black Thermoid brand fuel-oil hose comes in a 3/8" x 25' shop roll.

OEM: 63500-68

All models

V-Twin Manufacturing Black Fuel, Oil Line - Sold Each

This reinforced, black Thermoid brand fuel-oil hose comes in a 1/4" x 25' shop roll.

All models

V-Twin Manufacturing Black Fuel, Oil Line - Sold Each

This reinforced, black Thermoid brand fuel-oil hose comes in a 3/16" x 25' shop roll.

OEM: -68

All models

V-Twin Manufacturing Copper Motorcycle Oil Tank Drain Washer, FL 1941-1964 - Pack

Oil tank drain washer has a copper finish.

FL 1941-1964

V-Twin Manufacturing 1-8 NPT WG Leg & XL Oil Precision Machine Plug XL - Pack

Drain plug is 1/8" National Pipe Thread, and can be used on a variety of applications.
Plug can be used on lower fork sliders for FLH models and rocker arm covers, crank case, gear case, and oil pump on XL models.
OEM: 45830-48

FLH 1949-19

V-Twin Manufacturing SS Hose Clamp 5-8'-3-4' - Pack

Stainless steel oil line hose clamp is 5/8", and is worm gear type.

Custom application

V-Twin Manufacturing SS Hose Clamp 7-32-5-8 - Pack

Stainless steel fuel line hose clamp is 7/32" - 5/8" and worm gear type.

All models

V-Twin Manufacturing Radii Hose End Set, 5-16 - PR

Radii 5/16" fuel hose lock set is polished stainless steel. These are compression fittings that replace conventional hose clamps, and feature a cleaner appearance and superior sealing performance. Fits S&S Super "E" carburetor fitting.

Custo

V-Twin Manufacturing Radii Hose End Set, 5-16 - PR

Radii 5/16" fuel hose lock set is polished stainless steel. These are compression fittings that replace conventional hose clamps, and feature a cleaner appearance and superior sealing performance.

All models

V-Twin Manufacturing Oil Hose Support Bracket, Zinc - Sold Each

This zinc oil hose support bracket is a stock replacement.

OEM: 63549-65

Custom application

V-Twin Manufacturing Brake "T" Plug 1/8inNPT(Pk) - Pack
(F)Male Plugs.Size 1/8 NPT, Chrome

V-Twin Manufacturing Transmission Drain Washer, Brass - Pack

Brass drain plug washer is for transmission and engine case.

OEM: 62702-52

XL 1957-1986
FL 1941-1984
FX 1971-1984
K 1952-1956

V-Twin Manufacturing Male Female Fittings, Chrome, Straight 1-8 x 1-8 NPT - Pack

Chrome, straight oil fitting has 1/8" NPT male x 1/8" NPT female thread.

EL 1936-1940
FL 1941-1984
FLT 1979-1998
FXR 1982-1994
FXST 1984-1998
FLST 1986-1998
FXD 1991-1998