All

DRAG SPECIALTIES Chrome 530 Chain Conversion Rear Sprocket, Harley 00-16 FX 00-16 FL 00 - 16 XL

• Convert rear drive belt to 530 chain
• Steel with chrome finish
• Available in flat or dished

DRAG SPECIALTIES Chrome Aluminum Outer Primary Cover, Natural, Harley 99-06 FL

• Die-cast outer primary covers
• Standard eight-hole application, but location is marked for drilling ninth hole to allow nine-hole installation (PART #DS-375623)
• Available in chrome and satin black finishes
• Hardware and bushing not included

DRAG SPECIALTIES Chrome Axle Caps, Smooth, Front, Harley 08-15 FX 08-15 FL 08 - 15 XL 13 - 13 VR

• Die-cast aluminum construction
• Held in place by setscrews
• Sold in pairs

DRAG SPECIALTIES Chrome Ball-Milled Saddlebag Latch Inserts, Natural, Harley 93-13 FL

• Aluminum construction with chrome-plated or re-machined black finish
• Comes with a ball-milled or dimpled design that adds to the custom touch
• Replaces red reflectors on stock latches
• Sold in pairs

DRAG SPECIALTIES Chrome Banjo Bolt, 10mm x 1.25mm

• Top-quality clear-coated stainless steel-braided or black vinyl-coated stainless steel/braided brake lines, banjo bolts, brake line fittings and crush washers provide consistent, reliable performance
• Lines are available in 9" through 80" lengths
• Feature chrome-plated AN-3 ends
• Meet DOT MVSS-106 specifications
• Banjo bolts and fittings are chrome-plated steel and sold separately
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Banjo Bolt, Brake Light, Straight, size 3/8"-24

• Top-quality clear-coated stainless steel-braided or black vinyl-coated stainless steel/braided brake lines, banjo bolts, brake line fittings and crush washers provide consistent, reliable performance
• Lines are available in 9" through 80" lengths
• Feature chrome-plated AN-3 ends
• Meet DOT MVSS-106 specifications
• Banjo bolts and fittings are chrome-plated steel and sold separately
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Banjo Bolt, size 3/8"-7/16"-24

• Top-quality clear-coated stainless steel-braided or black vinyl-coated stainless steel/braided brake lines, banjo bolts, brake line fittings and crush washers provide consistent, reliable performance
• Lines are available in 9" through 80" lengths
• Feature chrome-plated AN-3 ends
• Meet DOT MVSS-106 specifications
• Banjo bolts and fittings are chrome-plated steel and sold separately
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Beach Bar 1" Touring Handlebars, center width 7.75", Natural, end rise rise height 4.5", overall width 36", pullback sweep 14.25", Harley 08-16 FL

• Notched for electronic throttle control
• Seamless steel tubing with a chrome-plated or gloss black finish
• Drilled for internal wiring
• Available in smooth unknurled style unless noted
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Billet Rear Axle Caps, Natural, Harley 13 - 16 XL

• Precision machined from aluminum for the perfect fit
• Firmly attach to the axle head and nut with high quality setscrews
• Available in chrome or black finish
• Sold in pairs
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Billet Teardrop Mirror, Left

• Chrome machined aluminum
• Unique design; sculptured stem
• Teardrop mirror heads measure 55/8" x 31/2" with 51/2" stems
• Mounting hardware supplied
• Sold each

DRAG SPECIALTIES Chrome Billet Teardrop Mirror, Right

• Chrome machined aluminum
• Unique design; sculptured stem
• Teardrop mirror heads measure 55/8" x 31/2" with 51/2" stems
• Mounting hardware supplied
• Sold each

DRAG SPECIALTIES Chrome Bobtail Luggage Rack, 9 1/4" L x 5 1/2" W, Harley 02-05 FX

• Chrome racks follow the contours of bobtail fenders
• Positive attaching points for bungee straps on front loops and back panel
• 00-05 FXST models require seat mounting bracket PART #0820-0027; sold separately

DRAG SPECIALTIES Chrome Bolt Cover, Socket Head, size 5/16"

• Beautifully designed pieces to cover the raw OEM bolt heads on your engine, transmission, primary and more
• Easy to install with included detailed installation instructions
• Made from ABS material, fasten with silicone; sold separately
• Available in chrome or black finishes
• Engine kits include motor bolt covers only
• Deluxe kits include motor/transmission/primary and select chassis bolt covers
• Standard kits include motor/transmission/primary bolt covers
• Individual covers are available for a wide variety of bolt and nut styles

DRAG SPECIALTIES Chrome Bolt In Valve Stem, dimensions .24", Pair

• Feature a metal bottom and rubber seal
• Available in chrome for wheels with .30" and .24" holes
• Sold in pairs

DRAG SPECIALTIES Chrome Bolt In Valve Stem, dimensions .30", Pair

• Feature a metal bottom and rubber seal
• Available in chrome for wheels with .30" and .24" holes
• Sold in pairs

DRAG SPECIALTIES Chrome Brake Pedal Cover, Aluminum, Rubber, Black, Natural, Harley 83-13 FX

• Billet aluminum construction
• Attaches to the existing OEM brake pedal
• PART #s 1610-0133 and 1610-0195 measure 25/8" x 43/4"
• PART #s 1610-0134 and 1610-0196 measure 2" x 31/8"
• Includes mounting hardware
• Matching shift pegs and grips available separately

DRAG SPECIALTIES Chrome Brake Pedal, Harley 04 - 13 XL

• Chrome-plated or black anodized aluminum forward controls
• Replace OEM forward controls or convert from mid-controls
• Include rubber insert footpegs, shift peg and mounting hardware; use stock brake master cylinder

DRAG SPECIALTIES Chrome Brake/Hydraulic Clutch Control Kit, clamping diameter 1", Natural, Dual disc, Aluminum, Each, specific application, Harley 14-16 FL

• Feature chrome brake and clutch controls
• Die-cast aluminum switch housings have radiused edges, OEM-style clamps, smooth tops and a chrome finish for a clean look
• Accept OEM style switches and wiring
• Switches available separately, see page XXX
• Brake/clutch controls and switch housings with OEM style clamps sold separately
• Chrome switch clamps available separately
• Master cylinders accept OEM-style rebuild kits and have clearance for all 11/4" handlebars

DRAG SPECIALTIES Chrome Brake/Mechanical Clutch Control Kit, brake master cylinder bore diameter 11/16", Natural, Dual disc, Aluminum, Each, specific application, Harley 96-07 FL

• Feature chrome brake and clutch controls
• Die-cast aluminum switch housings have radiused edges, OEM-style clamps, smooth tops and a chrome finish for a clean look
• Accept OEM style switches and wiring
• Switches available separately, see page XXX
• Brake/clutch controls and switch housings with OEM style clamps sold separately
• Chrome switch clamps available separately
• Master cylinders accept OEM-style rebuild kits and have clearance for all 11/4" handlebars

DRAG SPECIALTIES Chrome Buffalo 1-1/4" Springer Beach Bars, Natural, end rise rise height 3", overall width 39.5"

• The ultimate 1-1/4" diameter handlebar, designed for maximum comfort
• 1" diameter in clamping area
• Springer-style bars have 4-3/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Made in the U.S.A.
• Not for use with electronic throttle control or heated grips
  

DRAG SPECIALTIES Chrome Buffalo Bagger-Style Ape Hanger 1 1/4" Handlebars, Natural, pullback sweep 8"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls

Rise	9"
Width	34-1/2"
Pullback/Sweep	8"
Height	9-1/2"
Handlebar Diameter	1-1/4"
Controls Diameter	1"

DRAG SPECIALTIES Chrome Buffalo Beach Bar 1 1/4" Touring Bars, center width 9.5", Natural, end rise rise height 3", overall width 35.5", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Buffalo Risers, pullback sweep 1", rise height 9"

• Risers are machined from billet aluminum
• Fit any handlebars that have a 1" diameter in the clamping area, and have 11/4" riser diameter to compliment the style of 11/4" diameter handlebars
• Accepts Buffalo handlebar clamps or OEM-style handlebar clamps with offset mounting holes
• Pullback risers have 1" of pullback
• All risers use 1/2"-13 riser bolts; available separately
• Made in the U.S.A.

DRAG SPECIALTIES Chrome Bullet Style Spotlight, Universal, Steel

• Shell is steel construction with a chrome finish
• Bullet-style shape with a deep-dish trim ring
• Installs on included chrome mounting block
• Includes H4 55/60W bulb
• Features high- and low-beam functions
• ECE compliant (not DOT compliant)
• Sold each

DRAG SPECIALTIES Chrome Bullet-Style Rear Turn Signal Kit, 1156, Incandescent, White, DOT, Single function, Amber, Each, specific application, Harley 86-16 FL

• Kit features a narrow-profile chrome mounting bar and chrome bullet-style rear turn signals with amber lenses
• Replaces the stock turn signals and mounting bar
• Include 1156-style bulbs