Drag Specialties

• Machined from two pieces of billet aluminum to create a cutting-edge see-through design
• Adds exceptional style and comfort to your bike
• Available in chrome or black anodized finish; black anodized features machined accents on the top, bottom and side of the floorboard
• Includes all mounting hardware
• Matching passenger boards available (sold separately)
• Driver floorboards: 16" L x 6" W x .75" thick; Passenger floorboards: 7" L x 4" W x 1" thick

• Specially designed paddles provide increased straight-line traction and stability
• Paddles wrap around the shoulder for increased traction and maximum pulling power on steep inclines
• Advanced natural rubber compound runs cooler with increased abrasion resistance
• Available in six-, eight- and 10-paddle versions for sand applications only
• Tube type (TT)

• Aerodynamic shell design constructed using advanced poly-alloy plastic for light weight and strength
• Hypo allergenic and antimicrobial nylon liner and cheek pads are removable and washable
• Ear cavity space for speakers
• Removable screw-on vented visor
• Fully molded eye port trim with incorporated goggle grabber
• Eleven points of ventilation with chin, side, rear and forehead vents
• Clear-coat finish to protect paint and graphics
• Square D-ring style retention system
• For replacement parts and accessories, see page ???
• See helmet size guide on page ??? before ordering
• DOT and ECE-22.05 certified (except sizes 3X and 4X, which are DOT certified only)

• CNC-machined from billet aluminum
• Unique design and features make these controls a must-have upgrade for your stock or custom motorcycle
• Has a 5/8" bore master cylinder
• Made in the U.S.A.

• Feature the revolutionary Power Chamber design; a unique cross-over system that increases horsepower and torque
• Armed with full-coverage 21/2" heat shields that are essentially blue-proof for long-lasting style
• Like all Vance & Hines systems, these feature a superior fit and an unrivaled finish in either chrome or race-quality matte black ceramic coat
• Flat plane mounting panel for the 12mm oxygen sensors now featured across the 12-16 Softail/Dyna model lines; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM
• Meticulously finished billet end caps
• Removable baffles and all mounting hardware included
• Made in the U.S.A.

• Specially designed paddles provide increased straight-line traction and stability


• Paddles wrap around the shoulder for increased traction and maximum pulling power on steep inclines


• Advanced natural rubber compound runs cooler with increased abrasion resistance


• 6 Paddles


• Tube type (TT)

• (PRO SHIELDS/PIVOT KITS)Pro shields fit all current generation Icon helmets fitted with the Icon Prolock shield locking system and side plate kits, except Variant, Airmada and Airframe Pro
• Pro shields will not work on other brand helmets with pin locks
• (STANDARD SHIELDS/PIVOT KITS)Standard Icon shields fit all Icon helmets that do not feature the Prolock shield locking system and do not feature side plate kits
• (OPTICS SHIELDS/PIVOT KITS)Optics shields fit Airmada/Airframe Pro helmets fitted with the Icon Prolock shield locking system and side plate kits
• (TRACK SHIELDS)Track shields fit Airmada/Airframe Pro helmets fitted with Icon prolock shield-locking system and side plate kits
• Include posts for attaching removable dust tear-offs

• Cheek pads, liners, and other accessories for Icon helmets

• Clean design makes these assemblies a great choice for custom applications
• CNC-machined
• Assemblies fit most 1" diameter handlebars (except dimpled bars)
• Include mounting clamps and levers
• Hydraulic and cable clutch assemblies available
• Available with or without switch kit
• Switch kit includes three momentary switches with chrome or gloss black buttons and switch housing
• Switches can be wired internally or externally
• Sold each
• Made in the U.S.A.

• These air cleaners look great and work even better
• Outstanding performance on stock or mildly modified engines up to 90 horsepower
• Available with a standard (smooth) trap door or our Blood Groove design
• Chrome-plated or gloss black body and trapdoor with either chrome or black butterflies
• Provide excellent legroom for comfort while riding
• Include Kryakyn's breather where applicable

• Long-lasting street-oriented tread design built for the Kawasaki Mule that is used at the municipalities, school districts, warehouses, etc.
• Protective rim guard to save your rim when rubbing up against a curb
• Radial casing provides a smooth ride
• DOT for limited road use

• Oversized heat-treated and case-hardened frame arms for maximum durability
• Sliding and rotating upper arm allows for perfect indexing on any 7-21" wheel
• Kit includes Posi-Clamps, mount/demount bar, one spare demount tip, tire lube, spray bottle, tool collar with spoon bar attachment, two 16" spoon bars and scratch-proof bead breaker
• Yellow Thing's rubberized coating and special design prevents the tire bead from creeping when mounting the top bead
• The XtraHand is a hands-free clamp that holds the tire bead below the rim flange for fast, scratch-free tire mounting
• Portable Roll-On Base, PART #0365-0078, available separately
• SpoonBars with built-in rim protectors were designed to install tires with ease and protection
• Tire mounting pastes also available, see page ???

• High-quality moped and small cc motorcycle tires
• Front or rear application, unless noted
• Blackwall
• Tube type (TT)
• L-rated for speeds up to 74 mph, P-rated for speeds up to 93 mph or S-rated for speeds up to 112 mph

Hogtunes Bluetooth Wireless Controller For Harley Touring / Trike

The Hogtunes BTS-AA adds Bluetooth technology to your bike VIA your factory radio AUX input. It replaces the factory ambient air temperature gauge, which was usually inaccurate, and only told you what you already knew. It's tomorrow's technology - today - for yesterday's bikes.

Features:

• Easy plug and play installation with instructions


• Additional input for satellite radio / GPS etc


• Ability to pair with up to 9 wireless devices


• H-D accessory chrome rings fit perfectly


• Works with any radio that has 1/8" input


• Backlights for easy viewing at night


• Wireless range of up to 30 feet

• Memphis Shades Metric Adjustable Fork Clamps For 48mm-55mm Forks, Sold in pairs

• Bolts and nuts sold in packs of five sets of two each
• Vent tube is 750mm long; fits all Yuasa batteries; sold in packs of five

• Cheek pads, liners, and other accessories for Icon helmets

• Comfortable in all types of weather
• 100% polyester construction is wind-resistant, breathable and wicks away moisture
• Lightweight, machine washable and dries in minutes
• Wearable as a bandanna, scarf, beanie, balaclava, headband, wristband, helmet-liner, muffler, dust screen and more
• One size fits most adults

• High brightness readout with automatic nighttime dimming
• 0-199 mph adjustable speedometer
• Quick-response bar graph or digital tachometer
• Odometer with two resettable trip meters
• Oil pressure display with settable warning point
• Voltmeter with low voltage warning
• Digital motorcycle tachometer 12-hour clock
• Gear position display
• Fuel level display with sender learn routine
• Turn signal, high beam, neutral, low oil and service engine/wait to start indicators
• Performs calculations and displays high speed/rpm recall, 0-60 timer and 1/4-mile time and speed
• Available with several housing styles
• Sending units, adapters and mounting brackets available separately for use with either electronic or cable drive systems; handlebar clamp mounts for American IronHorse motorcycles allow gauges to be mounted above or below handlebars and include wiring harness that plugs directly into stock wiring
• Dakota Digital 7000 gauges and mounts available with chrome or black-anodized finish

• Bolts to the fender underneath the passenger seat
• Accepts Kryakyn's Low sissy bar (available separately)
• Assembly comes pre-drilled to fit stock H-D fenders
• Does not include hardware

• Puller Plate for DS-196056

• Long-lasting street-oriented tread design built for the Kawasaki Mule that is used at the municipalities, school districts, warehouses, etc.
• Protective rim guard to save your rim when rubbing up against a curb
• Radial casing provides a smooth ride
• DOT for limited road use

• Dual-purpose tread pattern features aggressive lines for traction on the street and off-road
• Stable central blocks with large grooves for outstanding water dispersion
• A proven compound yields outstanding traction and low tread wear
• Tubeless (TL)
• J-rated for speeds up to 62 mph

• Highest-quality motorcycle tubes meet or exceed OEM quality and performance
• Butyl construction
• For Valve Stem Types see page ???

• Specially designed paddles provide increased straight-line traction and stability
• Paddles wrap around the shoulder for increased traction and maximum pulling power on steep inclines
• Advanced natural rubber compound runs cooler with increased abrasion resistance
• Available in six-, eight- and 10-paddle versions for sand applications only
• Tube type (TT)

• Oversized heat-treated and case-hardened frame arms for maximum durability
• Sliding and rotating upper arm allows for perfect indexing on any 7-21" wheel
• Kit includes Posi-Clamps, mount/demount bar, one spare demount tip, tire lube, spray bottle, tool collar with spoon bar attachment, two 16" spoon bars and scratch-proof bead breaker
• Yellow Thing's rubberized coating and special design prevents the tire bead from creeping when mounting the top bead
• The XtraHand is a hands-free clamp that holds the tire bead below the rim flange for fast, scratch-free tire mounting
• Portable Roll-On Base, PART #0365-0078, available separately
• SpoonBars with built-in rim protectors were designed to install tires with ease and protection
• Tire mounting pastes also available, see page ???

• Replace lost or damaged exhaust parts
• Listed by exhaust PART #
• 2 meter max inserts allow a 2 dB noise level reduction in Akrapovic exhausts for MX and Enduro motorcycles
• Sold each

• Meet or exceed OEM-quality standards
• Built with the highest-quality paper, rubber and metal

• Brass carburetor jets are high-precision and flow-calibrated for extremely accurate fuel flow rate
• Available in a range of sizes
• High-quality replacements; NOT original Mikuni jets
• Sold to dealers in 4-packs; sold to consumers as each
• Fit all VM, TM and TMS/TMX carburetors
• 13.5mm long
• Sold to dealer in 4-pack; sold to consumer as each
• Fit all RS, HS and HSR carburetors
• 28.1mm long
• Sold to dealer as 4-pack; sold to consumer as each
• Fit late-model OEM BS CV carburetors
• 14mm long
• Sold to dealer as 4-pack; sold to consumer as each
• Fit Kawasaki, Suzuki and Yamaha OEM BS CV carburetors
• 14mm long
• Sold to dealer as 4-pack; sold to consumer as each
• Fit early-style TMS/TMX, TMX36, TMX38 and BSR CV carburetors
• 27.8mm long
• Sold to dealer as 4-pack; sold to consumer as each

MIKUNI RD VM22/210 PILOT JETS

A-BAX PILOT JETS FOR MIKUNI VM28/486

MIKUNI RD N151.067 PILOT JETS (NON-BLEED TYPE)

MIKUNI RD BS30/96 PILOT JETS (BLEED TYPE)

MIKUNI RD N224.103 PILOT JETS

• Cheek pads, liners, and other accessories for Icon helmets

• (PRO SHIELDS/PIVOT KITS)Pro shields fit all current generation Icon helmets fitted with the Icon Prolock shield locking system and side plate kits, except Variant, Airmada and Airframe Pro
• Pro shields will not work on other brand helmets with pin locks
• (STANDARD SHIELDS/PIVOT KITS)Standard Icon shields fit all Icon helmets that do not feature the Prolock shield locking system and do not feature side plate kits
• (OPTICS SHIELDS/PIVOT KITS)Optics shields fit Airmada/Airframe Pro helmets fitted with the Icon Prolock shield locking system and side plate kits
• (TRACK SHIELDS)Track shields fit Airmada/Airframe Pro helmets fitted with Icon prolock shield-locking system and side plate kits
• Include posts for attaching removable dust tear-offs

• Made from 100% neoprene
• Include permanent mouth and eye vents
• Eye opening large enough to accommodate goggles or sunglasses
• Hook-and-loop closure for custom fit
• Patterned masks reverse to solid black
• Oversize masks are made to fit larger heads; small masks are perfect for smaller heads
• Available in full-face and half-mask styles