All

DRAG SPECIALTIES Gloss Black 18" Buffalo Ape Hanger 1 1/4" Touring Bars, overall width 40", Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 20" Buffalo Ape Hanger 1 1/4" Touring Bars, Harley 08-16 FL

• Chrome or gloss black finish handlebars
• Diamond-knurled and machined for internal wiring
• Accept stock controls and handlebar clamp
• Designed specifically for electronic throttle control applications
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black 8" Buffalo Straight-Riser 1 1/4" T-Bars, center width 8.5", pullback sweep 5.875"

• The ultimate 11/4" diameter handlebar, designed for maximum comfort
• Dimpled and drilled for internal wires; works with standard controls
• Available with a show chrome or gloss black finish
• Standard bars have 31/2" on-center knurling to prevent movement (except T-Bars)
• Springer-style bars have 43/4" center diamond knurling for a smooth finished look; work with the OEM Springer risers and handlebar clamps
• Optional 11/4" thick Buffalo risers are also available to complete the look
• Optional handlebar clamps cover all of the center area that is sized down to one inch
• Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section
• See pages ???-??? for handlebar clamps and risers
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Beach Bar 1" Touring Handlebars, center width 7.75", drilled, end rise rise height 4.5", overall width 36", pullback sweep 14.25", specific application, Harley 08-16 FL

• Steel tubing with a chrome-plated or gloss black finish
• Wide variety of bends so you get that just-right fit and feel
• Available with dimples in a smooth, unknurled style unless noted
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Buffalo Risers, pullback sweep 1", rise height 9.5"

• Risers are machined from billet aluminum
• Fit any handlebars that have a 1" diameter in the clamping area, and have 11/4" riser diameter to compliment the style of 11/4" diameter handlebars
• Accepts Buffalo handlebar clamps or OEM-style handlebar clamps with offset mounting holes
• Pullback risers have 1" of pullback
• All risers use 1/2"-13 riser bolts; available separately
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Buffalo Risers, rise height 1.5"

• Risers are machined from billet aluminum
• Fit any handlebars that have a 1" diameter in the clamping area, and have 11/4" riser diameter to compliment the style of 11/4" diameter handlebars
• Accepts Buffalo handlebar clamps or OEM-style handlebar clamps with offset mounting holes
• Pullback risers have 1" of pullback
• All risers use 1/2"-13 riser bolts; available separately
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Buffalo Risers, rise height 10"

• Risers are machined from billet aluminum
• Fit any handlebars that have a 1" diameter in the clamping area, and have 11/4" riser diameter to compliment the style of 11/4" diameter handlebars
• Accepts Buffalo handlebar clamps or OEM-style handlebar clamps with offset mounting holes
• Pullback risers have 1" of pullback
• All risers use 1/2"-13 riser bolts; available separately
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Buffalo Risers, rise height 12"

• Risers are machined from billet aluminum
• Fit any handlebars that have a 1" diameter in the clamping area, and have 11/4" riser diameter to compliment the style of 11/4" diameter handlebars
• Accepts Buffalo handlebar clamps or OEM-style handlebar clamps with offset mounting holes
• Pullback risers have 1" of pullback
• All risers use 1/2"-13 riser bolts; available separately
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Buffalo Risers, rise height 3"

• Risers are machined from billet aluminum
• Fit any handlebars that have a 1" diameter in the clamping area, and have 11/4" riser diameter to compliment the style of 11/4" diameter handlebars
• Accepts Buffalo handlebar clamps or OEM-style handlebar clamps with offset mounting holes
• Pullback risers have 1" of pullback
• All risers use 1/2"-13 riser bolts; available separately
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Buffalo Risers, rise height 6"

• Risers are machined from billet aluminum
• Fit any handlebars that have a 1" diameter in the clamping area, and have 11/4" riser diameter to compliment the style of 11/4" diameter handlebars
• Accepts Buffalo handlebar clamps or OEM-style handlebar clamps with offset mounting holes
• Pullback risers have 1" of pullback
• All risers use 1/2"-13 riser bolts; available separately
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Cable Clamp, Brake, Idle, Throttle, size 1 1/2"

Sumax spark plug wire set is pre-cut and have the plug, coil boots and terminals already installed.
Spark plug wire kits are designed for electronic ignitions but work great on point type ignitions. Wire kit is purple 8mm type.

FXST 2000-UP

DRAG SPECIALTIES Gloss Black Cable Clamp, Brake, Idle, Throttle, size 1 1/4"

Sumax spark plug wire set are pre-cut and have the plug, coil boots and terminals already installed.
Spark plug wire set are designed for electronic ignitions but work great on point type ignitions. Wire kit is black 8mm type.

FLT 1999-UP

DRAG SPECIALTIES Gloss Black Cable Clamp, Clutch, size 1 1/2"

Splitfire dual mag 7mm spark plug wire set incorporates two premium magnetic suppression core conductors, which are protected by a layer of braided fiberglass and a 100% pure silicone outer jacket.

XL 1985-1998

DRAG SPECIALTIES Gloss Black Cable Clamp, Clutch, size 1 1/4"

This extreme duty battery cable set features #2 gauge wires which are very fat and flexible. The battery cables will transfer more cranking power with the very lease amount of voltage drop.
Over 2000 bare strands of copper are covered with special v

DRAG SPECIALTIES Gloss Black Cable Clamp, Clutch, size 1 1/8"

Sumax spark plug wire set is pre-cut and have the plug, coil boots and terminals already installed.
Spark plug wire kits are designed for electronic ignitions but work great on point type ignitions. Wire kit is red 8mm type.

FXST 2000-UP
F

DRAG SPECIALTIES Gloss Black Cable Clamp, Idle, Single Cable, Throttle, size 1 1/2"

Sumax spark plug wire set is pre-cut and have the plug, coil boots and terminals already installed.
Spark plug wire set is designed for electronic ignitions but work great on point type ignitions. Wire kit is blue 8mm type.

FXST 2000-UP
FL

DRAG SPECIALTIES Gloss Black Cable Clamp, Idle, Throttle, size 1 1/2"

Sumax spark plug wire set is pre-cut and have the plug, coil boots and terminals already installed.
Spark plug wire kits are designed for electronic ignitions but work great on point type ignitions. Wire kit is yellow 8mm type.

FXST 2000-UP

DRAG SPECIALTIES Gloss Black Cable Clamp, Idle, Throttle, size 1 1/4"

This extreme duty battery cable set features #2 gauge wires which are very fat and flexible. The battery cables will transfer more cranking power with the very least amount of voltage drop.
Over 2000 bare strands of copper are covered with special v

DRAG SPECIALTIES Gloss Black Cable Clamp, Idle, Throttle, size 1"

Set features a spiral wound coated core that is a blend of copper and nickel bonded by a latex cover which reinforces and assists in holding core resistance to 50 ohms.
The fat 10.4mm (.409) wires also feature three layers of pure zimplex silicone,

DRAG SPECIALTIES Gloss Black Clutch Cable Adjuster Cover, Harley 87-16 FX 86-16 FL 87 - 16 XL

• Replaces the rubber boot found on most clutch cables
• Two-piece design is easy to install or remove when clutch needs adjusting
• Fits 87-16 5- and 6-speed clutch cables

DRAG SPECIALTIES Gloss Black Domed Derby Cover, High-Sheen, Harley 04 - 16 XL

• Die-cast construction with a domed design
• Available in multiple finishes
• Includes mounting hardware

DRAG SPECIALTIES Gloss Black Fender-To-Fork Adapter For 21" Wheel, Harley 84-13 FL

• Aluminum adapters allow custom front fender installation
• Designed to work with most 51/2" wide undrilled fenders for 3" x 21" wheels
• 14-16 styles have 5/16" diameter, 33/16" on-center blind fender mounting holes with 31/2" on-center, 5/16" fork leg mount holes
• 84-13 styles have 1/4" diameter, 21/2" on-center blind hole fender mounts and 5/16" diameter, 3" on-center fork leg mount holes
• Measure 1.250" thick
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Fender-To-Fork Adapter For 21" Wheel, Harley 86-15 FL

• Adapters lift stock front fender to fit 21" wheel
• Sold in pairs
• Machined from billet aluminum
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Fender-To-Fork Adapter, Aluminum, Harley 80-13 FL

• Adapt FLSTF front fender to any 84-16 FLT or FLHT style fork using a stock wheel only
• Work with FLSTF fender PART #1401-0043
• Can also be used in many custom applications
• 14-16 style adapters measure 4" L x 21/8" T, with 3/8" thickness
• 14-16 style top holes are 5/16" with 2 3/4" on-centers; bottom holes are also 5/16" with 3"1/4" on-centers
• 84-13 style adapters measure 311/16" L x 111/16" T, with 3/4" thickness
• 84-13 style top holes are 5/16" with 2 3/4" centers, bottom holes are also 5/16" with 3" centers
• Sold in pairs
• Made in the U.S.A.

DRAG SPECIALTIES Gloss Black Fork Tins, Smooth, 3-Pack, Harley 86-15 FL

• High-quality reproduction fork tins
• Available in a smooth or ribbed styles in chrome or gloss black finish
• Slider covers can also be purchased separately

DRAG SPECIALTIES Gloss Black Front Turn Signal

• Die-cast, chrome-plated, matte black or gloss black finish with 23/8" diameter lenses
• Signals come with clear and smoke lenses
• Use a 1157-style bulb
• Front signals use solid 5/16" bolt and separate wire exit
• Rear signals mount with 5/16" hollow bolt and hidden wiring
• Sold each
• Use stock Deuce-style replacement lenses, bulbs available separately, see page XXX

DRAG SPECIALTIES Gloss Black Half-Moon Floorboards With Vibration Inserts, Harley 80-15 FL

• Classic style that looks great on all bikes
• Chrome or gloss-black powdercoat finish available
• Available with vibration-isolation inserts or plain for a low-profile look
• Install in stock location
• Use OEM brackets and hardware
• Sold in pairs

DRAG SPECIALTIES Gloss Black Horn Cover Kit, Harley 93-16 FL

• Fit the OEM horn
• Available with a chrome or gloss black powdercoat finish
• Cover and mounting bracket
• Sold separately

DRAG SPECIALTIES Gloss Black Kickstand Spring, Powder-coat, length 3.4", Harley 02-15 FX 12-15 FL

• Available for a wide selection of Big Twin and XL models
• Available in chrome or E-coated primer with a powder-coated gloss black finish
• Springs are measured from hook to hook; sold each

DRAG SPECIALTIES Gloss Black Kickstand Spring, Powder-coat, length 3.4", Harley 71-90 FX 41-90 FL 57 - 90 XL

• Available for a wide selection of Big Twin and XL models
• Available in chrome or E-coated primer with a powder-coated gloss black finish
• Springs are measured from hook to hook; sold each

DRAG SPECIALTIES Gloss Black Kickstand Spring, Powder-coat, length 3.4", Harley 91-01 FX

• Available for a wide selection of Big Twin and XL models
• Available in chrome or E-coated primer with a powder-coated gloss black finish
• Springs are measured from hook to hook; sold each

DRAG SPECIALTIES Gloss Black Kickstand Spring, Powder-coat, length 3.7", Harley 91-09 FX 91-07 FL 91 - 15 XL Buell 87-06

• Available for a wide selection of Big Twin and XL models
• Available in chrome or E-coated primer with a powder-coated gloss black finish
• Springs are measured from hook to hook; sold each

DRAG SPECIALTIES Gloss Black Kickstand Spring, Powder-coat, length 3.9", Harley 84 - 90 XL

• Available for a wide selection of Big Twin and XL models
• Available in chrome or E-coated primer with a powder-coated gloss black finish
• Springs are measured from hook to hook; sold each