All

DRIVEN RACING Red Bar End V2, Anodized, made in the usa, Aluminum, Pair, Replacement, Handlebar End

• Constructed on a 7-axis lathe to allow for precision machining of every complex contour in one simple operation
• Reduce vibration and arm pump while riding
• Stealth expansion sleeve design hides all visible hardware after installation is complete
• Available in five anodized colors
• Adapters are available and sold separately
• Made in the U.S.A.

DRIVEN RACING Red Bar End Weights, made in the usa, Pair, Handlebar

• Reduce bar vibration, arm pump and add a custom look
• Center section is 6061 billet aluminum, end caps are stainless steel
• All hardware is concealed after installation for a clean look
• Sold in pairs

DRIVEN RACING Red D-Axis Bar End Mirror, Anodized, Teardrop, glass width 1.5mm, made in the usa, Aluminum, Each, Slotted, Bar End Mount, Custom Replacement

• Anodized 6161 billet aerospace grade aluminum construction
• Mirror face uses 1.5mm convex glass for a wide viewing area
• Has a full 180 range of adjustability
• Optional bar end adapter available separately
• Sold each
• Made in the U.S.A.

DRIVEN RACING Red D3 Grip Replacement Material For 7/8" Bars, grip length 4.84", made in the usa, Pair, Grip Material

• Comfortable and attractive grips
• 2-ply designed to reduce vibration, arm pump and hand fatigue
• Manufactured from PVC-coated Kraton gel with alloy collars (black grip material with colored collars)
• Fit 7/8" bars with 4.84" inside length
• Grips are black with collar material available in black, blue, red, gold, silver, gray or clear
• Replacement grip material is available in black, blue, gray, red, white or clear; sold as a pair
• Driven bar ends on page ???

DRIVEN RACING Red Grippy Grips For 7/8" Bars, Blue, grip length 4.92", made in the usa, Pair

• 2-ply grip to reduce vibration, arm pump and hand fatigue
• Made from an outer ply of PVC, designed to stabilize grip surface, surrounding a second layer of Kraton gel to absorb vibrations
• Open end design fits 7/8" bars and features special no-slip pattern and two safety wire grooves
• Grippy Thin Grip has a very thin design for added control when competing and is available in black, measuring 4.72" inside length
• Grippy Grips are available in black, red or blue and measure 4.92" inside length
• Sold in pairs
• Driven bar ends on page ???

DRIVEN RACING Red Halo Fuel Cap, made in the usa, Each, Custom, Gas Tank Cap

• Halo symbolizes a new approach built on over 10 years of experience and growth making high-end motorcycle parts
• Halo is part philosophy, part technology - a synergy of the two infused together to create the most advanced and beautifully designed jewels for your bike
• Lower surface area
• 30% weight reduction
• Self-contained venting system (no hose)
• Clean lines to match modern sport bikes
• Black mounting screws
• Cap and base sold separately

DRIVEN RACING Red Halo Stainless Steel Bar Ends, made in the usa, Pair, Replacement, Handlebar End

• Feature an elegant mix of aluminum and turned steel that create a clean finishing touch to the bars on your bike
• Fit most bikes with hollow bars
• Available in five different color options

DRIVEN RACING Red Left D-Axis Lever Guard, Anodized, made in the usa, Aluminum, Lever Protector

• Machined from 6061 billet aluminum
• Curved body for safe dismounting
• 45mm of adjustment and up to 171mm in total length
• Feature a break-away tip to help avoid bikes and riders from becoming attached after collision
• Kit designed to properly fit most OEM bars as well as after-market handlebars and clip-ons, five separate mounting options included in each kit

DRIVEN RACING Red Right D-Axis Lever Guard, Anodized, made in the usa, Aluminum, Lever Protector

• Machined from 6061 billet aluminum
• Curved body for safe dismounting
• 45mm of adjustment and up to 171mm in total length
• Feature a break-away tip to help avoid bikes and riders from becoming attached after collision
• Kit designed to properly fit most OEM bars as well as after-market handlebars and clip-ons, five separate mounting options included in each kit

DRIVEN RACING Red SBK Street Grips For 7/8" Bars, grip length 4.92", made in the usa, Pair

• 2-ply grip constructed of PVC and designed to stabilize the surface of the grip
• Second layer is constructed of Kraton Gel to absorb vibration and impact
• Designed to reduce arm soreness, arm pump, hand fatigue
• Closed-end grips fit 7/8" bars with 4.92" inside length
• Available in black, blue, gray or red
• Sold in pairs
• Driven bar ends on page ???

DRIVEN RACING Red Superbike Grips For 7/8" Bars, grip length 4.92", made in the usa, Pair

• 2-ply grip to reduce vibration, arm pump and hand fatigue
• Made from an outer ply of PVC, designed to stabilize grip surface, surrounding a second layer of Kraton gel to absorb vibrations
• Feature a no-slip pattern
• Two safety wire grooves
• Open-end design is available in gray, black, blue or red; sold in pairs
• Fit 7/8" bars with 4.92" inside length
• Driven bar ends on page ???

DRIVEN RACING Red/Black D-Axis Bar Ends, made in the usa, Aluminum, Replacement

• Machined from billet 6061 aluminum
• Advanced two-piece design
• All hardware concealed after installation
• Made in the U.S.A.

DRIVEN RACING Red/Black D-Axis Grips, grip length 4.84", inside diameter 7/8", made in the usa

• Proprietary 2-ply Krayton gel grip design for maximum comfort
• Anodized collars to increase durability
• Fit 7/8" bars with 4.84" inside length
• Grips are black with collar material available in black, blue, red, gold, silver or titanium
• New black/stainless steel design features stainless steel grip collars to match Driven SS bar ends (sold separately)
• Open end design
• Made in the U.S.A.

DRIVEN RACING Red/Black D3 Grips For 7/8" Bars, grip length 4.84", made in the usa, Pair

• Comfortable and attractive grips
• 2-ply designed to reduce vibration, arm pump and hand fatigue
• Manufactured from PVC-coated Kraton gel with alloy collars (black grip material with colored collars)
• Fit 7/8" bars with 4.84" inside length
• Grips are black with collar material available in black, blue, red, gold, silver, gray or clear
• Replacement grip material is available in black, blue, gray, red, white or clear; sold as a pair
• Driven bar ends on page ???

DRIVEN RACING Replacement Black Clip-On Bar, made in the usa, Aluminum

• Constructed from aerospace-grade 6061 T-6 billet aluminum bars and 7075 T-6 billet aluminum clamps
• Ultimate strength and unmatched anodized color
• Laser etched with precision equipment
• Available in black or titanium anodized finish
• Riser-style clip-ons feature a fixed 1.5" rise and adjustable bar angle; each side allows for up to 10 of adjustment and comes with plastic bar end sliders already installed
• Replacement bars and hardware available separately
• Made in the U.S.A.

NOTE: Driven clip-ons are not an OEM replacement and this chart is intended for reference purposes only.

DRIVEN RACING Replacement Blue Clip-On Bar, Anodized, made in the usa, Aluminum, Handlebar

• Constructed from aerospace-grade 6061 T-6 billet aluminum bars and 7075 T-6 billet aluminum clamps
• Ultimate strength and unmatched anodized color
• Laser etched with precision equipment
• Available in black or titanium anodized finish
• Riser-style clip-ons feature a fixed 1.5" rise and adjustable bar angle; each side allows for up to 10 of adjustment and comes with plastic bar end sliders already installed
• Replacement bars and hardware available separately
• Made in the U.S.A.

NOTE: Driven clip-ons are not an OEM replacement and this chart is intended for reference purposes only.

DRIVEN RACING Replacement Gold Clip-On Handlebar, Anodized, made in the usa, Aluminum

• Constructed from aerospace-grade 6061 T-6 billet aluminum bars and 7075 T-6 billet aluminum clamps
• Ultimate strength and unmatched anodized color
• Laser etched with precision equipment
• Available in black or titanium anodized finish
• Riser-style clip-ons feature a fixed 1.5" rise and adjustable bar angle; each side allows for up to 10 of adjustment and comes with plastic bar end sliders already installed
• Replacement bars and hardware available separately
• Made in the U.S.A.

NOTE: Driven clip-ons are not an OEM replacement and this chart is intended for reference purposes only.

DRIVEN RACING Replacement Red Clip-On Bar, Anodized, made in the usa, Aluminum, Handlebar

• Constructed from aerospace-grade 6061 T-6 billet aluminum bars and 7075 T-6 billet aluminum clamps
• Ultimate strength and unmatched anodized color
• Laser etched with precision equipment
• Available in black or titanium anodized finish
• Riser-style clip-ons feature a fixed 1.5" rise and adjustable bar angle; each side allows for up to 10 of adjustment and comes with plastic bar end sliders already installed
• Replacement bars and hardware available separately
• Made in the U.S.A.

NOTE: Driven clip-ons are not an OEM replacement and this chart is intended for reference purposes only.

DRIVEN RACING REPLACEMENT SCREW SET, made in the usa, Handlebar

• Constructed from aerospace-grade 6061 T-6 billet aluminum bars and 7075 T-6 billet aluminum clamps
• Ultimate strength and unmatched anodized color
• Laser etched with precision equipment
• Available in black or titanium anodized finish
• Riser-style clip-ons feature a fixed 1.5" rise and adjustable bar angle; each side allows for up to 10 of adjustment and comes with plastic bar end sliders already installed
• Replacement bars and hardware available separately
• Made in the U.S.A.

NOTE: Driven clip-ons are not an OEM replacement and this chart is intended for reference purposes only.

DRIVEN RACING Replacement Silver Clip-On Bar, Anodized, made in the usa, Aluminum, Handlebar

• Constructed from aerospace-grade 6061 T-6 billet aluminum bars and 7075 T-6 billet aluminum clamps
• Ultimate strength and unmatched anodized color
• Laser etched with precision equipment
• Available in black or titanium anodized finish
• Riser-style clip-ons feature a fixed 1.5" rise and adjustable bar angle; each side allows for up to 10 of adjustment and comes with plastic bar end sliders already installed
• Replacement bars and hardware available separately
• Made in the U.S.A.

NOTE: Driven clip-ons are not an OEM replacement and this chart is intended for reference purposes only.

DRIVEN RACING Right Black D-Axis Driven Lever Guard, Anodized, made in the usa, Aluminum, Lever Protector

• Machined from 6061 billet aluminum
• Curved body for safe dismounting
• 45mm of adjustment and up to 171mm in total length
• Feature a break-away tip to help avoid bikes and riders from becoming attached after collision
• Kit designed to properly fit most OEM bars as well as after-market handlebars and clip-ons, five separate mounting options included in each kit

DRIVEN RACING Right Gold D-Axis Lever Guard, Orange, Anodized, made in the usa, Aluminum, Lever Protector

• Machined from 6061 billet aluminum
• Curved body for safe dismounting
• 45mm of adjustment and up to 171mm in total length
• Feature a break-away tip to help avoid bikes and riders from becoming attached after collision
• Kit designed to properly fit most OEM bars as well as after-market handlebars and clip-ons, five separate mounting options included in each kit

DRIVEN RACING Right Side Halo Bar End Mirror, Red, made in the usa, Each

• Machined out of a solid block of 6061 T6 aluminum using 3D machining to create the best looking and working mirror to date
• Feature a stainless steel ball and cup system which allows the mirror to adjust infinitely to achieve the best viewing angle and to fit the bike style and the rider's ergonomics
• Flip-in function allows the mirror full flip-in adjustment during heavy traffic
• Fit most bikes with hollow bars; adapters are available and sold separately

DRIVEN RACING Right Silver D-Axis Lever Guard, Anodized, made in the usa, Aluminum, Lever Protector

• Machined from 6061 billet aluminum
• Curved body for safe dismounting
• 45mm of adjustment and up to 171mm in total length
• Feature a break-away tip to help avoid bikes and riders from becoming attached after collision
• Kit designed to properly fit most OEM bars as well as after-market handlebars and clip-ons, five separate mounting options included in each kit

DRIVEN RACING Silver Left D-Axis Lever Guard, Anodized, made in the usa, Aluminum, Lever Protector

• Machined from 6061 billet aluminum
• Curved body for safe dismounting
• 45mm of adjustment and up to 171mm in total length
• Feature a break-away tip to help avoid bikes and riders from becoming attached after collision
• Kit designed to properly fit most OEM bars as well as after-market handlebars and clip-ons, five separate mounting options included in each kit

DRIVEN RACING Silver/Black D-Axis Bar Ends, made in the usa, Aluminum, Replacement

• Machined from billet 6061 aluminum
• Advanced two-piece design
• All hardware concealed after installation
• Made in the U.S.A.

DRIVEN RACING Silver/Black D-Axis Grips, grip length 4.84", inside diameter 7/8", made in the usa

• Proprietary 2-ply Krayton gel grip design for maximum comfort
• Anodized collars to increase durability
• Fit 7/8" bars with 4.84" inside length
• Grips are black with collar material available in black, blue, red, gold, silver or titanium
• New black/stainless steel design features stainless steel grip collars to match Driven SS bar ends (sold separately)
• Open end design
• Made in the U.S.A.

DRIVEN RACING Skully Grips For 7/8" Bars, Black, grip length 4.92", made in the usa, 2 Ply

• 2-ply grip to reduce vibration, arm pump and hand fatigue
• Made from an outer ply of PVC, designed to stabilize grip surface, surrounding a second layer of Kraton gel to absorb vibrations
• Feature a skull design in the PVC
• Open end design fits 7/8" bars with 4.92" inside length
• Driven bar ends on page ???

DRIVEN RACING SPROCKET FRT 520 14T, made in the usa, 520 Steel, Front, specific application

• One of the lightest 520 steel sprockets available today
• Designed using our proprietary EST Technology
• Performance and longevity all in one sprocket
• Attractive black zinc semi-gloss finish
• Lowered surface to remove unnecessary weight
• Available in a wide variety of tooth counts

DRIVEN RACING SPROCKET FRT 520 14T, made in the usa, 520 Steel, Front, specific application

• One of the lightest 520 steel sprockets available today
• Designed using our proprietary EST Technology
• Performance and longevity all in one sprocket
• Attractive black zinc semi-gloss finish
• Lowered surface to remove unnecessary weight
• Available in a wide variety of tooth counts

DRIVEN RACING SPROCKET FRT 520 14T, made in the usa, 520 Steel, Front, specific application

• One of the lightest 520 steel sprockets available today
• Designed using our proprietary EST Technology
• Performance and longevity all in one sprocket
• Attractive black zinc semi-gloss finish
• Lowered surface to remove unnecessary weight
• Available in a wide variety of tooth counts

DRIVEN RACING SPROCKET FRT 520 15T, made in the usa, 520 Steel, Front, specific application

• One of the lightest 520 steel sprockets available today
• Designed using our proprietary EST Technology
• Performance and longevity all in one sprocket
• Attractive black zinc semi-gloss finish
• Lowered surface to remove unnecessary weight
• Available in a wide variety of tooth counts