All

BARNETT Stainless Steel Idle Cable, cruise ready, elbow 90, Harley 96-01 FL

• This antique style stamped steel coil cover is a beautiful addition when that time gone by look is what you want
• Used to replace the OE rectangular style cover
• A welded-in mounting bracket bolts directly to the seat post coil mount
• eatures spark plug wire access holes

Paughco
Chrome Plated Coil Cover
Fits Big Twin 4 speed 1965/Later with horseshoe style oil tank & Softail 1984/1999

BARNETT Stainless Steel Idle Cable, elbow 130, Harley 00 - 01 XL

• High quality original equipment style replacement handlebar switches
• Switches feature raised ribs to help keep your thumbs from sliding off and 48 of color coded lead wire

V-FACTOR
Black Start, Run/Off Switch with white lettering
Fits Big Twin & Sportster 1996/Later, VRSC 2002/Later
Replaces HD# 71589-96
(Imported)

BARNETT Stainless Steel Idle Cable, elbow 90, Harley 02-07 FL

• Fits in the OE location
• Compatible with OE style cover
• eatures a high impact thermoplastic cover
• Can be used with any size spark plug wires

V-FACTOR
3.0 OHM Black Coil
Fits Big Twin & Sportster
Note: Not designed for use on Twin Cam, EI, Sportster 1200S single fire ignition systems or point type ignition systems

BARNETT Stainless Steel Idle Cable, elbow 90, Harley 02-07 FL

• USA made direct replacement for fuel injected models (EI)
• Up to 30% more voltage providing you with more horsepower and increased fuel mileage
• Replaces OE 4 pin coils

Andover
Replacement Coil
Fits EI OE 4 Pin 2001/Later Coils
Replaces HD# 31696-07A & 31696-07A

BARNETT Stainless Steel Idle Cable, elbow 90, Harley 06-16 FX 12-16 FL
V-FACTOR
Chrome Plated Complete Kit with Chrome Plated Switches
High quality die cast aluminum switch housing with switches includes throttle lock thumb screw assembly, button head mounting hardware with allen wrench & 48 wires pre-attached to the switches
Fits Big Twin & Sportster 1982/1995 (except models with radio controls)

BARNETT Stainless Steel Idle Cable, elbow 90, Harley 96-01 FL

• 65,000 volts (45% higher than OEM coil)
• Mounts in stock location
• Designed for single spark plug per head applications
• Can be used with aftermarket ignition systems that incorporate a mechanical advance

Accel
3 OHM Coil
Fits Big Twin & Sportster with aftermarket single fire ignitions that require a 3 OHM coil
Note: Will not fit models with OEM single fire ignitions such as Electronic uel Injection, Twin Cam or 1200 Sportster Sport

BARNETT Stainless Steel Idle Cable, elbow 90, Harley 96-01 FL

• These USA made end mount style coils produce in excess of 30,000 volts for more horsepower and cripser throttle response
• Can be mounted on 3 1/2 or 4 inch centers and require custom mounts
• See part description for availability of color, spark plug lead and outlet

Andover
5 OHM Black Coil Pair
Single Spark Plug Lead
Angle Outlet

BARNETT Stainless Steel Idle Cable, elbow 90, Harley 96-01 FL

• Replacement coil mount made from steel
• Has two well nuts permanently attached to ease coil cover installation

V-FACTOR
Chrome Plated Mount
Fits Big Twin 4 speed Late 1978/Early 1982 & fits the seat post on custom frames if used with a 1965/1999 OEM style coil
Replaces HD# 31728-78A
(Imported)

BARNETT Stainless Steel Throttle Cable, elbow 115, Push-in, Harley 02-07 FL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

BARNETT Stainless Steel Throttle Cable, elbow 130, Harley 00 - 01 XL

• Heavy-duty rotors feature a super thick hub and splines that eliminate cracks
• Precision-wound stator
• Includes a chrome regulator with OEM-style connectors

BARNETT Stainless Steel Throttle Cable, elbow 130, Harley 07 - 16 XL

• Provide 25A at idle and 40A continuously above 2800 rpm
• Unique narrow rotor and stator fit into Softail/Dyna/FLT primary cases as used by most custom builders and the voltage regulator bolts on the stock location without any frame modifications
• Precision-balanced vented rotor keeps the stator cooler in closed primary systems to maintain maximum output under all high-current draw conditions
• Custom-designed flanged seal spacer provides maximum support for the rotor
• Voltage regulator output is calibrated to 14.25V from idle on up
• Ideal for fuel-injected engines and bikes with overdrive-type transmissions
• Made in the U.S.A.

BARNETT Stainless Steel Throttle Cable, elbow 90, Harley 02-07 FL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

BARNETT Stainless Steel Throttle Cable, elbow 90, Harley 03-07 FL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

BARNETT Stainless Steel Throttle Cable, elbow 90, Harley 06-16 FX

• Black spiral core spark plug wires from the leader in racing technology
• Kevlar Core, which is 4 times the aramid fiber wire core
• Insulated with EPDM, a material which is UV stable and helps to resist cracking
• 304 stainless steel alloy conductor delivers the highest level of spark energy possible
• 8 mm jacket O.D.

Moroso
Length: 8, 20 ¹/₂
Plug End: Straight
Coil End: Straight
Fits all Sportster models (except 1200S) 1986/2003
Replaces HD# 32092-98

BARNETT Stainless Steel Throttle Cable, elbow 90, Harley 90-95 FL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

BARNETT Stainless Steel Throttle Cable, elbow 90, Harley 96-01 FL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

BARNETT Stainless Steel Throttle Cable, elbow 90, Harley 96-01 FL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

BARNETT Stainless Steel Throttle Cable, elbow 90, Harley 96-07 FL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

BARNETT Stainless Steel Throttle Cable, elbow 90, Harley 96-07 FL

• Two years of development and design went into producing a superior regulator
• Fully assembled in the USA with domestic made electrical boards
• Tested three different times during the assembly process to ensure the best possible product
• Superior internal heat management results in better, more reliable performance
• All aluminum die-cast housings available in chrome or black finish
• Made in the U.S.A.

BARNETT Standard Black Vinyl Clutch Cable, Indian 2014 (Scout)

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Black Vinyl Clutch Cable, Victory 03-07

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Black Vinyl Clutch Cable, Victory 10-15

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Black Vinyl Clutch Cable, Victory 12-14

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Black Vinyl Idle Cable, Victory 03-07

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Black Vinyl Throttle Cable, Victory 03-07

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard SBlack Vinyl Clutch Cable, Victory 09-14

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Stainless Steel Clutch Cable, Natural, Indian 2014 (Scout)

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Stainless Steel Clutch Cable, Natural, Victory 03-07

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Stainless Steel Clutch Cable, Natural, Victory 08-09

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Stainless Steel Clutch Cable, Natural, Victory 09-14

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Standard Stainless Steel Clutch Cable, Natural, Victory 10-15

• Barnett cables are smooth-working, long-lasting and made with the finest components available, making them virtually indestructible
• Stainless steel cables with clear coating offer that custom look without the fear of damaging areas that the cables come in contact with
• Available with standard nylon-lined, PVC-coated casings in standard diameters
• Made in the U.S.A.

BARNETT Stealth Series High-Efficiency Clutch Cable, Black, length 53", Vinyl, Harley 86 - 11 XL

Wiring pin

OEM: 72039-71A

All models

BARNETT Stealth Series High-Efficiency Clutch Cable, Black, length 56", Vinyl, Harley 86 - 11 XL

Wiring socket is a single socket pin connector.

OEM: 72038-71A

All models