All

Jims shaft nuts now give the ultimate in flywheel holding power. The mating face of each nut has been ground to a 32 surface finish and held square to threads within .0005". This in turn will pull the shafts straight into the flywheels and simplify flywheel truing. We didn't stop there! Each nut is machined on state of the art CNC lathes, and heat treated to make these nuts the toughest and best available on the market.

"T" Type Pinion Gear Shaft Key
Fits Big Twin Evolution 1990/1999, K Model & Sportster 1988/1999
Package of 10
Replaces HD# 11219

1" Lowered Kickstand Dresser Models 2007/Later* Use On Lowered Bikes

• When you lower your Dresser model, you have to use a shorter kick stand to allow correct lean angle when your bike is parked
• Handcrafted in the USA, TIG welded and hand polished to accept smooth show quality chrome plating
• Mounts on OE bracket and utilizes the OE kick stand spring
• Will also fit years back to 1984, but lean angles may vary

Pingel
Chrome Plated Kick Stand
Length: 1 Lowered ront, 1 Lowered Rear
Fits Dreser models 2007/Later

10Mm Banjo Bolt W/Washers 3/8-24 X .778" Length Black, Goodridge # 775-03Bk

• Universal brake lines are the perfect solution for any brake or clutch line fitment for any bike
• Hose features clear or black PVC coating, PTE inner liner, and premium stainless steel braided armor
• PVC hose coating adds great looks, abrasion protection to expensive parts, and resistance to damaging UV rays
• PTE liner is an inert material compatible with all hydraulic and brake fluids, has a heat range of -158 degrees to 500 degrees, and shields brake systems from moisture, unlike other materials like nylon
• Stainless steel braid is superior in pressure rating, flame resistance, and volumetric expansion to all other materials, including Kevlar, resulting in unmatched stopping power
• All hardware is beautifully chromed mild steel with a 96 hour salt spray rating
• Best when used with Goodridge universal adapters Goodridge
  Black 3/8-24 (10mm x .778) Banjo Bolt with Washers
  (Imported)

10T One Piece Str Jackshaft Bt 94/L* W/102 T Cl Ring Gear Uw 89/L* Starter Mfg 79-2106

• One Piece hardened construction helps to prevent breakage common with high compression engines
• Eliminates the inner primary support bushing that sometimes creates alignment problems
• Includes 10-32 threaded bolt for 1989/1993 starter motors and a 1/4-20 threaded bolt for 1994/Later starter motors

All Balls
10 Tooth Pinion Gear for use with a 102 Tooth Clutch Ring Gear
.689 Bushing End O.D.
Fits Big Twin 1994/Later

12 Volt 2.9 Ohm Coil, Chrome ST 1985-99, FLT & Dyna 85-98,Spt 84-03,Fxr 85-94, OEM 31614-83A

• Designed for dual fire ignitions with single spark plug per head
• Produces 30,000 + volts (about 20% more voltage than the OEM coil)
• Styled after the 1983-1999 coil

V-FACTOR
2.9 OHM Chrome Plated Coil
Fits Softail 1985-1999, FXR 1985-1994, FLT 1985-1998 (except EI), Dyna 1985-1998, Sportster 1984-2003 (except 1200S)
Replaces HD# 31614-83A

12 Volt Minilight W/13"Wire Fits Lighted Mirror Stems 1.2 Watts & .1 Amp

• Bulb measures ¹/₂ long x ³/₁₆ wide
• Possible uses include:
  Interior saddlebag lighting
• Inspection light for shop use
• Replacement bulb for our lighted mirrors found in the control section
• Test light for onboard tool kit

V-FACTOR
Light Bulb for Custom Use
Includes 13 of sheathed lead wire
12 volt, 1.2 watt, .1 amp
(Imported)

12 Wire Male Socket Housing Uw Deutsh Socket Wire End Black,Hd 72119-94Bk,Mfg Dp-12B

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Black Housing, 12 Connectors
Male Socket Housing
HD# 72119-94BK

12 Wire Male Socket Housing Uw Deutsh Socket Wire End Grey,Hd 72139-94Gy,Mfg# Dp-12G

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Grey Housing, 12 Connectors
Male Socket Housing
HD# 72139-964GY

Cable Bty Ultra-Flexible Clear 12" Ctr/Ctr 1/4" & 5-16" Holes 4 Gauge Tinned Copper ..78-112

• Recommended for high compression engines
• 1,661 individual 36 gauge tin coated copper strands strategically woven for maximum current flow
• High performance battery cables will increase starter performance by supplying maximum battery current to the starter motor
• Offer you a custom braided stainless appearance with an ultra-flexible translucent jacket that is oil & gas resistant and rated at 287° while providing excellent performance and show quality good looks
• Kits include one battery positive terminal to starter motor cable and one battery negative terminal to ground cable
• eatures:
  • Copper ends with corrosion resistant Zinc Plating
  • Electrolytic-Grade copper strands
  • The look of braided stainless steel
  • All cables have one ⁵/₁₆ I.D. end and one ¹/₄ I.D. end
  • Cable ends are crimped on and include waterproof heat shrink
  • 4 gauge for high performance
  All Balls
  12 Individual Cable

12Mm Banjo Bolt W/Washers 7/16-24 X.900"Length Black, Goodridge #775-44Bk

• Universal brake lines are the perfect solution for any brake or clutch line fitment for any bike
• Hose features clear or black PVC coating, PTE inner liner, and premium stainless steel braided armor
• PVC hose coating adds great looks, abrasion protection to expensive parts, and resistance to damaging UV rays
• PTE liner is an inert material compatible with all hydraulic and brake fluids, has a heat range of -158 degrees to 500 degrees, and shields brake systems from moisture, unlike other materials like nylon
• Stainless steel braid is superior in pressure rating, flame resistance, and volumetric expansion to all other materials, including Kevlar, resulting in unmatched stopping power
• All hardware is beautifully chromed mild steel with a 96 hour salt spray rating
• Best when used with Goodridge universal adapters Goodridge
  Black ⁷/₁₆-24 (12mm x .900) Banjo Bolt with Washers
  (Imported)

12V Generator W/Regulator Blk Bt 65/69,Spt 65/E84,Servi-Car 65/73, Electric Start Only

• Integrated design combines the solid state regulator into the end of the generator for an uncluttered look with simplified wiring
• The regulator incorporates the armature support bearing to keep the overall length (7.58 from gasket surface fins) to a minimum
• The regulator not only controls voltage, it limits current (amps) in an inverse proportion by sensing the temperature of the armature. As the temperature increases, the amperage decreases. This provides more amps after a cold start to recharge the battery faster (5 minutes instead of 20) yet protects against overheating
• See the electric section for drive gear, oil deflector plate and gasket
• Instructions are included

V-FACTOR
Black Generator
Fits Big Twin 1965/1969, Sportster 1965/Early 1984 & Servi-Car 1965/1973 (also used to update 1958/1964 6 volt charging systems to 12 volt)

12V Generator W/Regulator Cp Bt 65/69,Spt 65/E84, Servi-Car 65/73, Electric Start Only

• Integrated design combines the solid state regulator into the end of the generator for an uncluttered look with simplified wiring
• The regulator incorporates the armature support bearing to keep the overall length (7.58 from gasket surface fins) to a minimum
• The regulator not only controls voltage, it limits current (amps) in an inverse proportion by sensing the temperature of the armature. As the temperature increases, the amperage decreases. This provides more amps after a cold start to recharge the battery faster (5 minutes instead of 20) yet protects against overheating
• See the electric section for drive gear, oil deflector plate and gasket
• Instructions are included

V-FACTOR
Chrome Plated Generator
Fits Big Twin 1965/1969, Sportster 1965/Early 1984 & Servi-Car 1965/1973 (also used to update 1958/1964 6 volt charging systems to 12 volt)

13"Wide Metal Seat Pan Custom Use Painted Black

• Seat pans ready for your custom upholstery
• Two versions to fit your needs
• 13 gauge pans are perfect for strength and durability
• Welded in place spring mount studs are 5/16-18 on 6 3/4 centers
• Front seat hinge studs are 5/16-18 on 3 1/4 centers

HARDBODY
Black Painted Metal Seat Pan
13 wide x 14 long
(Imported)

2 Button Switch Clamp,Chrome Custom Use 2 Stainless Momentary Switches

• Custom billet switch for 1 handlebars
• Designed for internal wiring
• Perfect for minimalistic choppers and bobbers
• 2 stainless steel momentary switches
• Use for starters, horn, etc.
• Use our 16405 High-low Relay with this clamp for push button headlight high beam to low beam function
• See below for availability of finishes

V-FACTOR
Chrome Plated Clamp

2 Wire Male Socket Housing Uw Deutsh Socket Wire End Black,Hd 72112-94Bk,Mfg# Dp-2B

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Black Housing, 2 Connectors
Male Socket Housing
HD# 72112-94BK

2 Wire Male Socket Housing Uw Deutsh Socket Wire End Grey,Hd 72132-94Gy,Mfg# Dp-2G

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Grey Housing, 2 Connectors
Male Socket Housing
HD# 72132-94GY

2" Extension Kit For #45850 Dyna Models 2006/Later* Includes Hardware

• Converts mid shift models to forward controls
• Show quality chrome plating with all mounting hardware

V-FACTOR
Chrome Plated 2 Extension Kit
Fits Dyna 2006/Later
(Imported)

2" Lowered Kickstand Dresser Models 2007/Later* Use On Lowered Bikes

• When you lower your Dresser model, you have to use a shorter kick stand to allow correct lean angle when your bike is parked
• Handcrafted in the USA, TIG welded and hand polished to accept smooth show quality chrome plating
• Mounts on OE bracket and utilizes the OE kick stand spring
• Will also fit years back to 1984, but lean angles may vary

Pingel
Chrome Plated Kick Stand
Length: 2 Lowered ront, 1 Lowered Rear
Fits Dreser models 2007/Later

2" Primary Drive Belt, 8mm X 140T, BDL-140-2
All replacement primary belts are fiberglass reinforced HTD type rubber belts (except 77511, 77548 & 77533 that are KEVLAR® reinforced) supplied to us straight from the manufacturer to ensure a positive fit every time. If the needed belt length is not known, determine the number of pulley teeth combination and width for the correct belt.

Belt Drives Ltd.
Replacement Belt (2" Wide, 8mm, 140 Tooth) 48 & 69 Pulley Teeth Combo
Fits 1990/2006 Softail Signature Series

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on belts.

25Mm Wheel Bearing Puller Softail (Front) 07/L*(Ex Sprg) Uw #57914 Brg Tool Jims 958

• Used to remove 25mm ID wheel bearings

Note: Must be used with our 57914 wheel bearing installer/remover toolJims
Fits Softail front wheel 2007/Later (except Springer)
Replaces HD# 44060-10

3 Wire Male Socket Housing Uw Deutsh Socket Wire End Black,Hd 72133-94Bk,Mfg# Dp-3B

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Black Housing, 3 Connectors
Male Socket Housing
HD# 72113-94BK

3 Wire Male Socket Housing Uw Deutsh Socket Wire End Grey,Hd 72133-94Gy,Mfg# Dp-3G

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Grey Housing, 3 Connectors
Male Socket Housing
HD# 72134-94GY

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Center Fill With Battery Box

• These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
• 3.5 quart with battery tray
• Lower left hand relief for use with a chain or belt rear drive
• The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
• Tank body measures 6 ¹/₂ O.D.
• Made from 16 gauge steel to resist cracking
• 100% TIG welded for maximum strength
• Includes heavy duty front mount and fill plug
• Use with Softail size battery and OE style rear tank mount
• Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
• or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Raw Steel lat Side Center ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

3.5 Qt Custom Round Oil Tank Any Frm W/St Style Mt,Raw Stl Side Fill With Battery Box

• These tanks feature our exclusive oil return routing system. The internal oil return tube is extended allowing it to dump the hot returned engine oil to the far left side of the oil tank. This keeps the returned oil as far away from the feed line, creating an efficient circulating effect
• 3.5 quart with battery tray
• Lower left hand relief for use with a chain or belt rear drive
• The flat side tanks measure 11 ⁷/₈ long and the domed side tanks measure 12 ¹/₂ long
• Tank body measures 6 ¹/₂ O.D.
• Made from 16 gauge steel to resist cracking
• 100% TIG welded for maximum strength
• Includes heavy duty front mount and fill plug
• Use with Softail size battery and OE style rear tank mount
• Uses ¹/₈-27 NPT fittings for vent, return & feed lines, and ¹/₄-18 NPT fittings for oil drain (see the fuel section)
• or best results use our 80627 rubber mounts and 10807 battery cushion

Note: As with any new oil tank, always thoroughly inspect and flush before installingHARDBODY
Raw Steel lat Side, Side ill Oil Tank
Fits all HARDBODY AT-A-TUDE, chopper style & rigid frames. Also fits OE Softail frames 1984/1999 if our 85152 front tank mount is used

32Amp Rotor/Stator Kit Big Twin 70/99 Except Twin Cam Rpls 29957-81B & 29970-88C

• Requires similar amperage regulator/rectifier

POWER HOUSE PLUS
32 AMP Kit
Fits Big Twin 1970/1999 (except Twin Cam)
Replaces HD# 29957-81B & 29970-88C

38 Amp Charging System Fxst 84/99,Fxr,Flt 84/94 3 Phase

• System features sealed rotor, 38 amp stator and chrome plated regulator
• eatures Deutsch connectors

V-FACTOR
38 Amp Charging System
Fits Softail models 1984/1999, Dyna models 1991/1998 & FXR, FLT models 1984/1994
(Imported)

4 Wire Male Socket Housing Uw Deutsh Socket Wire End Black,Hd 72114-94Bk,Mfg# Dp-4B

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Black Housing, 4 Connectors
Male Socket Housing
HD# 72114-94BK

4 Wire Male Socket Housing Uw Deutsh Socket Wire End Grey,Hd 72134-94Gy,Mfg# Dp-4G

• These are the same sealed connectors thatHarley Davidson^™ has been using since 1994
• Crimp type wire ends are designed for easy installation
• 13 AMP rating for 16 or 18 gauge wire
• The preferred choice of professionals

NAMZ Custom Cycle Products
Grey Housing, 4 Connectors
Male Socket Housing
HD# 72134-94GY