Mid-USA

Primary Cover Gasket,Outer St 1989/2006,Dyna 1991/2005 Rpls Hd 60539-94B

• Economically priced
• High quality for sure scaling
• Sold each

POWER HOUSE
iber with Silicone Bead
Primary Cover Gasket
Fits Softail 1989/2006 & Dyna 1991/2005
Replaces HD# 60539-94B

Performance Alternator Rotor Use With 38 Or 45 Amp Systems Rpls Hd 29999-97B & 29981-95
V-FACTOR
Standard Black Rotor
Fits Big Twin 1997/2005 with 38-45 Amp charging system
(Imported)

Spring Kit For Springer Forks Use With Most Custom Springers Inc Springs,Rods,Seats & Nuts
HARDBODY
Chrome Plated Complete Spring Kit
Includes springs, rods, seats & nuts

Custom Springer Rocker Studs Hardbody Wide Springers & Most Custom Wide Springers,Chrome
HARDBODY
Chrome Plated Rocker Studs (Set of 4)

Air Filter Element Sportster 1988/2003 Rpls Hd# 29331-96

• Engineered for increased performance
• Washable and reusable high flow 4-layer cotton element increases air flow while offering unmatched filtration for long engine life
• Not only will these filters increase horsepower in stock engines, they are a must when performance upgrades have been done your motorcycle
• Sold each

V-FACTOR
Air ilter Element, 1 5/8 width
Fits Sportster 1988/2003
Replaces HD# 29331-96

Harley-Davidson Front Fork Tubes Flt/Flh 84/99 Stock Length Rpls Hd# 45827-84

• All fork slider tubes are centerless ground from seamless aircraft tubing in either show chrome (USA) or hard chrome (Import)
• All fork tubes are sold in pairs and include spring spacers

Hard Chrome Plated
Stock 20 7/8 Length Set fits FLT, FLTC, FLTCU, FLHT, FLHTC, FLHTCU, FLHS, FLHR 1986/1996 with or without air forks
Replaces HD# 45827-84
2 US Length Set fits LST, LSTC, LST, LSTN 1986/1999
Replaces HD# 45930-86

Jackshaft Coupler Bt 1990/2006 (Ex 2006 Dyna) Rpls Hd 31548-90
V-FACTOR
Coupler
Fits Big Twin 1990/2006 (except Dyna 2006)
Replaces HD# 31548-90
(Imported)

Air Filter Element Screaming Eagle 84/98 Replaces Hd# 29055-89
K&N brand ilter Chargers^® feature a 10-Year/Million-Mile Limited Warranty, are emissions legal in all 50 states and have been made in the USA for over 40 years

POWER HOUSE filter elements are engineered for increased performance, feature a washable and reusable high flow 4-layer cotton element and a urethane body for maximum life and a precise fit. Made in the U.S.A. with U.S.A. components

V-FACTOR blue filter elements are a quality imported product at an affordable price

• These high flow filters are designed to increase performance in both horsepower and throttle response by reducing air flow restriction while maintaining the filtration levels critical to ensure long engine life
• Not only will these filters improve the performance of a stock motorcycle, they are necessary when used in conjunction with performance upgrades such as low restriction exhaust, performance cam(s), carburetor kits or hotter ignition systems
• eatures a pre-oiled cotton/fabric type element that can be washed and re-oiled up to 25 times before it is considered to be no longer serviceable
• or best results when servicing the filter, use our air filter cleaner and filter oil found in the general merchandise section

V-FACTOR
7 O.D. x 2 width
Fits Screaming Eagle^® early style
Replaces HD# 29055-89

Ignition Part,Condenser All Point Type Ignition W/O Magneto Rpls Hd 32726-30A
High quality ignition condensers meet or exceed OEM specifications.V-FACTOR
Fits all Points Type Ignition (except Magneto models)
Replaces HD# 32726-30A
(Imported)

Coil High Performance Rd 4 Ohm 12 Volt All Models 1965/1979 W/Mount Cp Rpls Hd 31609-65A
These high performance dual fire round coils produce 10% greater output capacity than stock and include a seat post type mount. The two 7mm copper core spark plug wires measure 23 long and can be cut to the desired length. The screw-on tower caps include rubber seals to keep any moisture out. V-FACTOR
Chrome Plated, 12 volt, 4 OHM
Fits Big Twin 1965/1979
Replaces HD# 31609-65A
(Imported)

Conical Air Filter Cover Forged Aluminum, Chrome Plated Rpls Hd 28740-10

• These forward facing, exposed filter intake kits offer performance and racing looks
• The intake elbow and mount plate are made from light weight die cast aluminum and feature a show quality finish

Not legal for sale or use in California, or on any pollution-controlled vehiclesV-FACTOR
Chrome Add-On Conical Air Filter Cover
Add this forged aluminum filter cover to either mass flow intake for a custom look
Replaces HD# 28740-10

Oe Style Gas Cap Touring Models 1992/Later* Rpls Hd 61274-92

• OE style black plastic gas cap
• or use with Touring models with gas tank fuel doors
• Sold each

V-FACTOR
Black Plastic OE style Gas Cap
Fits Touring models 1992/Later
Replaces HD# 61274-92

Gas Tank Center Panel,Steel Rd Side Fat Bob Tanks W/O Gauges Plain Chrome Plated
Gas Tank Center Panels available as listed. Complete with mounting hardware.V-FACTOR
Chrome Plated Kit for use with Solid Mount at Bob Tanks when not using stock instrument panel cover
(Imported)

Custom Springer Top Stem Nut Use With Most Custom Springers Chrome Plated
HARDBODY
Chrome Plated Top Tree Stem Nut

Spark Plug Covers, Sparkies Red Lens Fits All H-D Spark Plugs W/90 Degree Boots

• Designed to show your engine's spark through colored lenses at the base of the wire

V-FACTOR
Sparkies Spark Plug Cover Pair with Red Lens
Fits all Harley-Davidson spark plugs with 90° boot
For 7mm or 8mm plug wires
Sold in pairs
(Imported)

Starter Relay,Delco Remy Style Bt 67/E68,Sportster 65/73 Replaces Hd 71455-67C

• High quality Delco Remy style relay

V-FACTOR
Fits Big Twin 1967/Early 1968 & Sportster Late 1971/1974
Replaces HD# 71455-67C

Oil Tank Dipstick W/Tempgauge Sportster 2004/Later* Rpls Hd 63023-05

• Monitor your oil temperature with this chrome dipstick/temperature gauge
• Design of this dipstick provides a grip area for easy removal

V-FACTOR
Chrome Plated Dipstick
Fits Sportster models 2004/Later
Replaces HD# 63023-05

Wheel,Bearing I.D. Reducer Stl 3/4" Axle,W/1"Id Ball Bearing 1" Id Bearing To 3/4" Id

• Reducers are designed to convert wheels with 1 I.D. sealed (ball type) bearings to a ³/₄ O.D. axle

HARDBODY
Stainless Steel Pair
(Imported)

Front Axle W/Chrome Head Fxr Dyna Spt 1987/99 W/39Mm Fr Forks Replaces Hd 43895-87

• OE style steel front axles are a direct replacement
• Available as a complete kit with chrome spacer(s), washers and axle nut or just the axle by Fitself
• See the wheel section for axle spacers and axle nut & washer
V-FACTOR
Chrome Plated Axle only
Fits FXR, Dyna & Sportster 1987/1999 with 39mm front forks
Replaces HD# 43895-87
(Imported)

Fuel & Oil Line,Clear Vinyl 5/16"Id X 9/16"Od 1/8"W 25 Ft Nylon Braid Reinforced

• ¹/₈ wall, open mesh nylon braiding has been incorporated within the clear vinyl, producing a pliable hose which will not shrink or harden
• Withstands high temperatures and pressures up to 750 PSI
• Highly resistant to fuel, oil and custom blended fuels

V-FACTOR
⁵/₁₆ I.D. x ⁹/₁₆ O.D. fuel & oil line
25 foot roll, (Imported)

Handlebar Oe Ape Hanger Style Fxdwg 1993/Later* W/Crimp & Knurled Center Rpls 56079-93

• Fits like OE handlebars
• Dimpled for wiring and has diamond knurls for security
• Designed to be used in stock applications as listed and for any custom application you desire
• Total width 33, rise to handlebar grip end 9 ¹/₂, center width to beginning of bends 6, total pullback 8
• Designed for risers on 3 ¹/₂ centers

V-FACTOR
Chrome Plated
Fits XDWG 1993/Later
Replaces HD# 56079-93
(Imported)

Springer Neck Stem Sleeve Cp Use With Most Custom Springers Sold Each
HARDBODY
Chrome Plated Neck Stem Sleeve (Sold Each)

Fender,Rear Bobbed Tail Flat Universal Custom Use...6" Wide Rolled Heavy Gauge Steel

• Manufactured form 16 gauge rolled steel
• eatures a bobbed tail with a rolled edge
• ender measures 41 in circumference

V-FACTOR
Raw Steel 6 wide fender
Fits Big Twin & Sportster Rigid frame with chain or belt rear drive
(Imported)

Handlebar Brake Light Switch, Big Twin & Spt 1982/1995 Rpls Hd 71574-82 & 71590-92

• High quality original equipment style replacement handlebar switches
• See below for availability of finishes
• Meets OEM specifications
• Include OEM length wires for ease of installation

V-FACTOR
Brake Light Switch
Fits Big Twin & Sportster 1982/1995
Replaces HD# 71574-82 & 71590-92

Rocker Arm,Shims .007" Thick Shovelhead 66/Later Use To Set End Clearance Mfg #2252
HARDWARE
Rocker Arm Shim, .007 Thick
Fits Shovelhead all years
Package of 10

Air Cleaner Screw,Blk Chrome Twin Cam 1999/Later* Rpls Hd 29600-00B

• Replaces the OE polished air cleaner screw
• Sold each

V-FACTOR
Black Chrome Air Cleaner Screw
Fits Twin Cam 1999/Later
(Imported)

Intake Manifold Adapter 40/44Mm Spigot Carb 2"Both End Gas Resistant Use W/82905 Clp
These gas resistant neoprene Intake Maniford Adapters are used to mount Mikuni and Lectron spigot style carburetors. They are available for mounting to a spigot type intake manifold or for mounting to a 2-bolt flange type manifold. V-FACTOR
lange Type for 40/44mm carburetor
Use with our 82905 clamps
(Imported)

Belt Drive Part,Pulley Covers Fits Bdl 3" Open Drives Ex Sh Pol Alum W/Hardware Md-100

• Baby moon style.
• Polished aluminum.
• Offers better protection and reducees clutch noise.
• Includes special tape for permanent installation and button head bolts if you choose to drill and tap hub for easy on and off access.

Polished aluminum pulley covers, includes double stick tape and screws for mounting. Fits 5 speed 3 open drives (Softail 1986/Later, FLT 1990/Later and FXR 1990/1994).

Trn Bearing,Main Drive Gear Bt 5 Spd L84/06,Spt 5Spd 91/05 Fits In Case Rpls Hd 8996A
V-FACTOR
Main Drive Bearing
Fits Big Twin 5 speed Late 1984/2006, Dyna 1991/2005, FLT 1993/2006, Sportster 5 speed 1991/2005
Replaces HD# 8996A

Brake Pads For Custom Caliper Fits Jaybrake J-Four Caliper Copper Sintered Material

• Copper sintered material for long life and quiet operation
• Economically priced
• See Additional Image for dimensions
• Sold in pairs

V-FACTOR
Copper Sintered Material Brake Pads
Fits Custom Calipers

Dash Kit, Late Model Kit For 68/84 W/Fatbob Tanks 1:1 Ratio Speedo

• Include cover, speedometer, ignition switch, base plate, tripometer reset knob and mounting hardware in an attractive display box
• All kits fit aftermarket and 1947/1990 at Bob tanks (solid mount and flatside)

V-FACTOR
Chrome Plated Late Model Kit
1:1 Ratio
Fits at Bob tanks 1947/1990
(Imported)