All

Features a 19 x 2.50 chrome rim a chrome hub with 25mm bearings and 40 chrome spokes. For use on 49mm forks. NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2017 FXD

Features a 21 x 2.15 chrome rim a chrome hub with 25mm bearings and 40 chrome spokes. Not ABS compatible. For use on 49mm forks. NOTE: All spokes on wheel need to be inspected and re-torqued after 500 miles of original installation. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2017 FXD

Front stand mounting kit features all items needed to mount the front stand on 1931-1948 Big twin and 1941-1942 Servi-Cars in a parkerized finish. 1931-1936 V 1937-1948 U 1936-1940 EL 1941-1948 FL 1941-1942 G

Front turn signal 36 extension harness for all 2011-up FXST FLST and 2012-up FXD models with turn signals mounted under the handlebar switch housing. This extension harness will allow the installation of taller than stock bars and the relocation of turn signal assemblies. The only way to move the turn signals is to cut the turn signal wiring that is hard wired into the circuit board installed in the handlebar switch housing. This harness will allow you to cut the wiring heat shrink the cut wire to prevent a short solder on extension harness and simple connect the other end o
32-4151" Anodized lid fits Wire Plus wiring kits. 2011-2017 FXST 2011-2017 FLST 2012-2017 FXD

4 extension harness is used for installing taller handlebars on all models when keeping the turn signals mounted on the handlebar switch housings on 1996-2012 models No crimping required. De-pin factory harness connector and install the new extension harness. 1996-2012 FLT 1996-2010 FXST 1996-2010 FLST 1996-2011 FXD 1996-UP XL

Front turn signal relocation kit with light bar is for use when turn signals must be relocated for the installation of fairing or windshield. 1996-UP FLT

Front Turn signal relocation kit without light bar is for use when turn signals must be relocated for the installation of fairing or windshield. 1996-UP FLT

25mm front wheel bearing kit includes bearing and center tube. *NOTE: Will not work on 2008-2017 FLD FXDF FXDWG models. 2008-UP FLT without ABS 2008-2017 FXD without ABS

Front wheel hub for 45 includes drum with a black finish. Bearings not included. Internals are not included and must be purchased separately. Hub width measures 6.5 Brake plate is required. *NOTE: We suggest using 24mm long nipples when lacing 45 Front drum wheels. 1941-1952 WL

Front wheel hub for 45 and includes drum with a chrome finish. Bearings not included. Internals are not included and must be purchased separately. Brake plate is required. *NOTE: We suggest using 24mm long nipples when lacing 45 Front drum wheels. 1941-1952 WL

Front wheel hub features a chrome finish. 2015-UP XL with ABS

Front wheel hub features a chrome finish. 2011-2017 FXST with ABS 2011-2017 FLST with ABS 2011-2017 FXDWG with ABS

Front wheel hub features a chrome finish. 2012-2017 FXD with ABS

Front wheel hub features a chrome finish. 2009-UP FLT with ABS

Cone nut for use with cone front hub axle sleeve. *NOTE: Nut accepts felt seal washer. 1944-1952 W

Cone nut for front wheel sleeve. This nut has the cone bearing and race attached to the nut. For use with grease seal. *NOTE: Replaces V-Twin #44-0938 Front Wheel Hub Cone Nut but without felt seal installation. *NOTE: Does not accept seal. 1929-1943 W

Kit includes studs nuts lockwashers for mounting the front wheel stabilizer collar. 1936-1952 G 1937-1942 WL 1941-1944 WLA 1937-1942 WLD

Fudgesickle kick starter pedal rubber. 1936-1952 EL 1941-1984 FL 1936-1963 G 1936-1952 W

Fudgesickle kick starter pedal assembly comes complete with black logo V rubber installed bolt spacer spring washer and lock washer included. 1936-1952 EL 1941-1984 FL 1936-1963 G 1936-1952 W

0-All models

Black rubber constructed reinforced fuel-oil line features a 3/8 inner diameter and is 20 feet long. 0-All models

Black rubber constructed reinforced fuel-oil line features a 5/16 inner diameter and is 20 feet long. 0-All models

Black rubber constructed reinforced fuel-oil line features a 5/16 inner diameter and is 6 feet long. 0-All models

Fuel injector. 2006-2015 FXST 2006-2015 FLST 2006-2016 FXD

This petcock shut off rod is zinc plated and is for use on left side fuel petcocks on side valve models. This extension lever makes it easier to turn the petcock on and off on models where it may be hard to reach under the left side of the gas tank. 1936-1940 EL 1937-1940 UL

Fuel petcock shutoff rod kit features a complete shutoff rod and cadmium plated seat fitting. The top cap finish is brass and the seat finish is chrome. NOTE: Shutoff rod kit includes lower fitting for 1941-49 Big Twins are zinc plated and the fitting for 1950-65 Big Twins is chrome. 1941-1949 FL 1941-1949 EL 1950-1965 FL

Kit features complete shut off rod with viton tip. Has bright cadmium plated seat fitting with a left tank reserve features chrome knob. 1941-1948 UL 1941-1949 E 1941-1949 FL 1941-1949 W 1941-1949 G

Kit features complete shut off rod with viton tip. Has bright cadmium plated seat fitting with a left tank reserve features chrome knob. 1950-1965 FL

Shutoff petcock kit with viton tip includes steel spacers cadmium plated rod and seat fitting brass knob and cover. *NOTE: Replacement nylon tips available. 1941-1949 G

Petcock shut off rod with Viton tip is for Big Twin models. The Viton tip provides a positive seal. Requires hardware which includes collar and spring knob and rod seat for the correct year group. This upgraded rod/tip will fit V-Twin shut off rod kits as well as OEM tanks and kits. *NOTE: Do not overtighten rod! Hand tighten only. 1941-1965 FL 1936-1952 EL

Fuel Petcock shut off rod only is for 45 models. The Viton tip provides a positive seal. *NOTE: Do not overtighten rod! Hand tighten only. 1941-1952 W 1941-1963 G

Tool provides simple fast and accurate fuel pressure checks. Includes 100psi gauge hose and adapter. The adapter features stainless steel springs and a push button that releases all fuel through the drain line. 0-All models with EFI

Housing only for fuel pressure regulator. 2002-2007 FLT 2001-2007 FLST 2001-2007 FXST

Fuel pump plate seals. Sold in a pack of 5. 2007-2012 XL