All

Isolator set for saddlebag. Set of four. All saddlebags and lids are constructed of FRP reinforced plastic readyy for primer and paint. FRP is made up of polyphenylene oxide/polyamide alloy.

Saddlebag rear filler strip set with a flat black finish. Right and left included in kit. 1993-2008 FLT

Stainless steel reinforcing back plates are for the saddlebag lid latch. Plates come in a two piece set. 1993-UP FLT

Set of rubber cushions for use on touring model saddlebags. Set of four. All saddlebags and lids are constructed of FRP fiberglass reinforced plastic readyy for primer and paint. FRP is made up of polyphenylene oxide/polyamide alloy. 2014-UP FLT

Seal set for saddlebag lid release handles. Set of two. 2014-UP FLT

ABS plastic right and left saddlebag set features a black finish and does not come with the lids Ready for preparation and primer! *NOTE: Sets are manufactures of thick ABS injection-molded plastic which creates a smooth surface with clean body lines both inside and out. The finish provides a smooth and clean surface making it easier to paint! **NOTE: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1997-2013 FLH

Set includes four bail head studs four washers four grommets four receptacles and four mounts for the left and right side. Includes torx head hardware. 1995-2013 FLT

Tether set for saddlebag. Set of two. All saddlebags tour boxes and lids are constructed of FRP reinforced plastic readyy for primer and paint. FRP is made up of polyphenylene oxide/polyamide alloy. 2014-UP FLT

Top straps for saddlebag. Includes 8 screws. Includes qty 4 pieces 12-16x5/8 self tapping screws (OEM #3596) and 4 pieces 8-32x1/2 stainless truss head screws (OEM #3592). 1993-UP FLT

SAE 60 weight oil patches can be either ironed on or sewn on . Sold as a pair. When using an electric iron to apply the patches to clothing NEVER use steam. Patch may be sewn on after being attached with it's adhesive. 0-All

Safety license plate topper with LED lamp measures 3.5 tall. The red ruby in the middle of the star lights up. 0-All models

Safety license plate topper with reflector measures 3.5 tall. The red ruby in the star is a reflector. Reflector measures 3-1/2 x 2-1/2 . 0-All models

SBS ceramic brake pad set for use on Performance Machine 162 X 2 caliper. 0-Special application for Performance Machine 162 x 2 Caliper

SBS ceramic brake pads are for use on GMA Model A calipers. 0-Special application for GMA model A" Caliper"

SBS ceramic brake pad 4 piece set for use on GMA F Jaybrake 2-piston caliper and Performance Machine 125 x 2 caliper. 0-Special application for GMA model F" Caliper" 0-Special application for Jaybrake small 2-piston Caliper 0-Special application for Performance Machine 125 x 2 Caliper 0-Special application for Performance Machine 125 x 4S Caliper 0-Special application for Performance Machine 125 x 4SL Caliper

SBS ceramic brake pad set for use on GMA Model B and Jaybrake 2 Piston calipers. 0-Special application for GMA model B" Caliper" 0-Special application for Jaybrake 2-piston ADC/ADCS Caliper

SBS ceramic brake pad set for performance machine 137 x 4 caliper and 124 x 4HR caliper. 0-Special application for Performance Machine 124 x 4HR Caliper 0-Special application for Performance Machine 137 x 4 Caliper

SBS ceramic brake pad set for use on performance machine 127 x 4R caliper. 0-Special application for Performance Machine 125 x 4R Caliper

Scavenger oil pump assembly with the welch plug installed features a parkerized finish. All internals are included. *NOTE: Cover has outlet for rear chain oiler. For use on Servi-Car and WLA models. 1937-1973 G 1942-1942 WLA

Scavenger oil pump cover features cast iron construction. This is the outer cover only without internals. Order hardware separately. *NOTE: WL style without rear chain oiler outlet. 1941-1952 W 1937-1948 UL

Scavenger oil pump cover features cast iron construction
This is the outer cover only, without internals, does not include gasket and pin. Order hardware separately.

*NOTE: Features the chain oiler provision.

Scavenger oil pump gear for side valve 1937-1952 WL 45"
12-1254" 1937 1948 UL 74 and 80""

Oil pump scavenger idler gear. 1936-1940 EL

Scavenger idler oil pump gear for side valve 1937-1952 WL 45"
12-1255" 1937 1973 G 45"
12-1255" 1937 1948 UL

2020 New Production oil pump scavenger idler gear. 1972-1976 XL

Scavenger pump rebuild kit. Scavenger pump rebuild kit includes a parkerized oil pump mount kit scavenger oil pump gear oil pump retainer half key drive gear key screen pump base and cover gaskets and the scavenger oil pump idler gear. 1937-1952 W 1937-1948 U

Scissor shock kit featuring original hillclimber style and function includes a chrome scissor friction assembly and a parkerized bracket and hardware. The friction design acts as a fork dampner. 1936-1952 W 1941-1948 FL 1936-1948 EL 1936-1957 G

Scissor fork damper kit features a parkerized finish. Mounts to same tabs as the hydraulic damper assembly. 1941-1948 FL 1936-1948 EL 1936-1957 G 1936-1952 W

Chrome fork steering damper kit is multi disc scissor style. 1945-1948 UL 1945-1952 WL 1945-1957 G

Seal ring retaining pins. Sold as a pack of 10. 1937-1952 W 1937-1948 U 1937-1973 G

Seat bar bolt spacer kit includes a bolt spacer bushing nut washer and grease fitting. 1952-1956 K 1952-1956 KH 1957-1970 XL 1957-1970 XLH 1957-1970 XLCH

Black seat bracket kit includes seat bracket right and left bracket. 1958-1984 FL 1958-1984 FLH 1966-1984 FXE 1966-1984 FX 1982-1983 FXR 1980-1984 FX

Seat clevis pin and spring is a reproduction of seat pin and spring retainer used on all models with a seat post. The finish is parkerized. 1936-1952 EL 1941-1965 FL 1936-1952 W 1936-1973 G

Seat mount kit. 1982-2003 XL