All

Chrome 1 handlebar with 13 rise has slots for internal and external wiring. Features right side knotches for throttle by wire application and 2 knurl spacing. 1982-UP FLT 1982-UP FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-UP FXR 1991-2017 FXD

1985-UP FLHT 1985-UP FLHR 1985-UP FLHX 1985-UP FLTR

13 FLT stock shock set features a chrome finish. **Warning: Installing a lowering kit or shorter shocks will decrease initial ground clearance. The motorcycle will be lower to the ground and care should be taken to avoid bottoming especially over bumps or in turns. 1995-UP FLHR 1995-UP FLT 1995-UP FLHT 1995-UP FLTR 1995-UP FLHX

Chrome 13 sissy bar is constructed of 5/8 round solid stock featuring the original poor boy style. The side plates are the non-detachable type. The rear wheel must be removed for installation. The top is screwed to the side plates by 2 allen screws on each side. *NOTE: Bar height is measured from the first bend to top. 1986-2003 XL

Chrome 13 sissy bar is constructed of 5/8 round solid stock featuring the original poor boy style for rigid side plates on 2004-up XL models. These side plates are the non-detachable type. The Rear wheel must be removed for installation. The top is screwed to the side plates by 2 allen screws on each side. *NOTE: Bar height is measured from the first bend to top. 2004-UP XL 1957-1978 XL 2002-2005 FXD

Chrome 13 sissy bar kit includes a 13 round solid bar and non-detachable side plates. The side plates are the non-detachable type. The rear wheel must be removed for installation. The top is screwed to the side plates by 2 allen screws on each side. Mount to fender strut holes measure 7-5/8 center to center. *NOTE: Bar height is measured from the first bend to top. 1994-2003 XL

Chrome 13 sissy bar kit includes a 13 round solid sissy bar detachable side plates and a luggage rack mounting kit. The rear wheel must be removed for installtion. The top is screwed to the side plates by 2 allen screws on each side. Center to center between the front and rear mounting holes on the side plates measures 7-1/2 . *NOTE: Bar height is measure from the first bend to the top. 2004-UP XL

13 in 1 folding tool kit. This tool includes: 3-Hex: 5/32 - 3/16 - 1/4 inch 2-Torx: T25-T27 2-Screwdriver: 205 2-Open Wrench: 10mm - 12 point box 9/16 open end - 6mm spoken wrench 3-Socket: 3/8 - 7/16 - 1/2 inch. 0-All models

Center valve inner tube with metal stem For use on 130/80 x 17 rear tires. 0-Rear

Ape style Z handlebar has a 1-1/4 bar diameter and features a black finish. Handlebars require 1-1/4 diameter riser clamps which can be purchased separately. *NOTE: Will not fit FLHT or FLHX models. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1999-2013 FLTR 1999-2018 FLHR

Ape style Z handlebar has a 1-1/4 bar diameter and features a chrome finish. Handlebars require 1-1/4 diameter riser clamps which can be purchased separately. *NOTE: Will not fit FLHT or FLHX models. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1999-2013 FLTR 1999-2018 FLHR

1-1/4 black handlebar with 14 rise. These bars are drilled with a copper wire inside for pulling thru internal wiring and is notched for throttle by wire application. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1985-UP XL 1986-2017 FLST 1984-2017 FXST 1991-2017 FXD 1984-1994 FXR

Black 1-1/4 handlebar has a 14 rise with indents for external wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-1994 FXR 1991-2017 FXD 1982-2007 FLT

Chrome 1-1/4 handlebar with a 14 rise to center is indented to accept internal wiring with a 3 knurled center spacing. Handlebar is notched for throttle by wire applications. ChiZeled bar replaces welded and mitered corners with cast seamless 90° bends for added strength and style. The cast elbows features removable plugs to simplify internal wiring and eliminates sharp internal bends. The full 1-1/4 diameter at the clamping area is for use with 2015-up FLTR Roadglide models and features a front oval wire hole. The front exit hole is used to wire full 1-1/4 tubes at the rise
25-0181" Chrome 1-1/4 handlebar with a 12 rise to center is indented to accept internal wiring with a 3 knurled center spacing. Handlebar is notched for throttle by wire applications. ChiZeled bar replaces welded and mitered corners with cast seamless 90° bends for added strength and style. The cast elbows features removable plugs to simplify internal wiring and eliminates sharp internal bends. The 1-1/4 diameter at the clamping area is for use with 2015-up FLTR Roadglide models and features a front oval wire hole. The front exit hole is used to wire full 1-1/4 tubes at the riser cla
25-0182" Chrome 1-1/4 handlebar with a 16 rise to center is indented to accept internal wiring with a 3 knurled center spacing. Handlebar is notched for throttle by wire applications. 2015-UP FLTR

1-1/4 chrome handlebar with 14 rise. These bars are drilled with a copper wire inside for pulling thru internal wiring and is notched for throttle by wire application. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1985-UP XL 1986-2017 FLST 1984-2017 FXST 1991-2017 FXD 1984-1994 FXR

1-1/4 black handlebar with 14 rise and throttle by wire right side notches. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2013 FLT 2008-2013 FLHT 2008-2013 FLHTC 2008-2013 FLHTX

1-1/4 black handlebar with 14 rise and indents internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-2007 FLT 1982-2007 FLHT 1982-2007 FLHTC 1982-2007 FLHTX

14 Multi-bar features a chrome finish with a unique built in riser mount bolt that mount directly to the bushings in the triple tree so that no risers are required. Includes saddles for secure mounting at the bolt area. Bolts are included. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1980-1983 FLT 1984-2013 FLT

14 Multi-bar features a black finish with a unique built in riser mount bolt that mount directly to the bushings in the triple tree so that no risers are required. Includes saddles for secure mounting at the bolt area. Bolts are included. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1980-1983 FLT 1984-2013 FLT

2015-UP FLTR

2015-UP FLTR

Black 1-1/4 handlebar is knurled and drilled for internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1974-1981 FL 1974-1981 FX 1974-1981 XL

Black 1-1/4 handlebar has holes for internal wiring and features throttle by wire right side notches. *NOTE: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2007-2015 FLT

Black 1-1/4 handlebar features throttle by wire right side notches and has holes with a copper wire inside for pulling thru internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2014 FLTR

Chrome 1-1/4 handlebar features throttle by wire right side notches and has holes with a copper wire inside for pulling thru internal wiring. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-2014 FLTR

2015-UP FLTR

Black 14 Z handlebar is slotted and drilled for internal wiring. Bars are 1-1/4 diameter with 1 diameter at grip and riser areas with 1 knurls. Handlebar is notched for throttle by wire applications. A thin guide wire is included to assist with guiding the wires through the handlebars. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1984-2017 FXST 1986-2017 FLST

Black 1-1/4 handlebar has holes for internal wiring and features throttle by wire right side notches. Fits models with or without fairings. Handlebar bends towards the rider for fairing clearance.

36” total width
18” center width at top
15” center width at bottom
15” rise
9” pull back
4” center to center knurl width

1986-2013 FLT
1982-UP FLHX

Chrome 1-1/4 handlebar has holes for internal wiring and features throttle by wire right side notches. Fits models with or without fairings. Handlebar bends towards the rider for fairing clearance. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1986-2013 FLT 1982-UP FLHX

14 tooth generator gear with slinger Gear is for use on SV models only with oil slinger. 32E-3 brush 6 volt applications on side valve models. For gear installation use a solid generator gear pin available separately. 1937-1957 UL 1937-1952 W 1937-1948 U 1937-1957 G

This black handlebar is full 1-1/4 outer diameter tubing and requires 1-1/4 inner diameter riser. It features indents with holes for internal wiring. Bars are indented at the grip area. The wire hole is located at the underside of the bar. *Note: For fitment application purchase 1-1/4 risers separately. Bars do not fit 201-up FLTR Road Glide models. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. Custom application for use with 1-1/4 risers"

Standard height detachable sissy bar features a chrome finish and is 14-1/2 tall. *NOTE: Installation requires the separate purchase of the docking hardware kit. 2018-UP FLFB 2018-UP FLFBS 2018-UP FXBR 2018-UP FXBRS

Black Ape 1-1/4 handlebar has holes for internal wiring and features throttle by wire right side notches. For fairing models. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2007-2015 FLT