All

Chrome flower style seat decoration with stud. 0-All models

FLSTS complete spring fork assembly is stock length and features a black finish. Includes axle caliper bracket risers and neck bearings Forks feature a black finish while the 3/4 axle top tree and risers are a chrome finish. Order fender and brake assembly separately. For use with 16 wheel assemblies. Accepts OEM shocks. *NOTE: 27 from rocker stud to the bottom of the top tree. (30 from axle to bottom of top tree.) 1997-2005 FLSTS

FLSTS complete spring fork assembly with chrome finish is stock length and includes risers neck stem bearings races dust shields top tree caliper mount and axle with acorn nuts. Order fender and brake assembly separately. For use with 16 wheel assemblies. Accepts OEM shocks. The distance between the top tree and the bottom tree is 7-1/2 . *NOTE: 27 from rocker stud to bottom of the top tree. (30 from axle to bottom of top tree.) FLSTS fork assemblies have a 10% rake built into the stem. There is not a groove for the fork lock. 1997-2005 FLSTS

FLT 2:1 lake style exhaust system with billet tapered megaphone muffler ends features a black finish Includes mounting hardware and can be used with floorboards. Megaphone end is at 45° angle and is baffled. ***NOTE: Cosmetic imperfections around oxygen sensor bungs sensors not included *NOTE: Header pipes do not includes heat shields andare not available for purchase. 1997-2016 FLT

FLT 2:1 lake style exhaust system with a tapered megaphone muffler end features a chrome finish. Billet tip cap finishes the end of the muffler chamber Includes mounting hardware and can be used with footboards. Megaphone end is at a 45° angle and is baffled. ***NOTE: Pipes are without oxygen sensor bungs. *NOTE: Header pipes do not includes heat shields and are not available for purchase. 1995-2006 FLT

FLT 2:1 lake style exhaust system with a tapered megaphone muffler end features a chrome finish. Billet tip cap finishes the end of the muffler chamber Includes mounting hardware and can be used with footboards. Megaphone end features a 45° angle and is baffled. ***NOTE: Cosmetic imperfections around oxygen sensor bungs sensors not included. *NOTE: Header pipes do not includes heat shields and are not available for purchase. 2007-2016 FLT

FLT three phase alternator kit is 54 amp. 2011-2013 FLT 2011-2013 FLHT 2011-2013 FLHR 2011-2013 FLHX 2011-2013 FLTR

FLT 56 amp three phase alternator kit is for air cooled models only. 2014-UP FLT Air cooled models only 2014-UP FLHT Air cooled models only 2014-UP FLHR Air cooled models only 2014-UP FLHX Air cooled models only 2014-UP FLTR Air cooled models only

FLT 56 amp three phase alternator kit is for water cooled models only. 2014-UP FLT Water cooled models only 2014-UP FLHT Water cooled models only 2014-UP FLHR Water cooled models only 2014-UP FLTR Water cooled models only 2014-UP FLHX Water cooled models only

FLT clutch master cylinder cover features a smooth style chrome finish. 2017-UP FLT

Stock type black rubber FLT cush drive dampener features a one-piece construction for easier installation. 2009-UP FLT 2009-UP FLHT 2009-UP FLHR 2009-UP FLHX

TPV stock type FLT cush drive dampener constructed of one piece for easier installation is 25% more stiffer than the stock rubber type. 2009-UP FLT 2009-UP FLHT 2009-UP FLHR 2009-UP FLHX

FLT fairing head bezel features a natural molded black plastic ready for primer and paint. 2014-UP FLT

FLT front brake line to caliper bleeder screw and banjo screw kit featires a black finish and fits all 2008-up FLT models front caliper with or without ABS. This is for both sides so the kit includes two bleeder screws two banjo bolts two dust caps and four gaskets. 2008-UP FLT 2008-UP FLHT 2008-UP FLTR

FLT front brake line to caliper bleeder screw and banjo screw kit is chrome plated and fits all 2008-up FLT models front caliper with or without ABS. This is for both sides so the kit includes two bleeder screws two banjo bolts two dust caps and four gaskets. 2008-UP FLT 2008-UP FLHT 2008-UP FLTR

FLT front engine mount. 2009-UP FLT

FLT rear axle features a 25mm outer diameter and a zinc finish 2014-UP FLT

Touring rear fender extender is molded from black ABS plastic ready for primer and painting. *NOTE: Fits over exiting fender. May require some modification. We suggest pre-fitting the fender prior to painting. Installation requires drilling of holes. **Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 2008-UP FLT

FLT shotgun tail pipe extension set features a chrome finish with black highlighted ball milled ends These 2-1/4 non-baffled pipes features a 18mm O2 sensor bung. *NOTE: 2012-UP applications will require separate purchase of O2 sensor bung adapter set V-Twin 32-6578. 1995-2016 FLT

FLT shotgun tail pipe extension set features a black finish with black highlighted ball milled ends These 2-1/4 non-baffled pipes features a 18mm O2 sensor bung. *NOTE: 2012-UP applications will require separate purchase of O2 sensor bung adapter set V-Twin 32-6578. 1996-2016 FLT

FLT stabilizer bar features a chrome finish and constructed of billet aluminum. Stabilizer bar is designed with a spherical bearing machined with a counter bore. This allows for a flush mount. 2009-UP FLT

FLT starter motor end cover kit features a black finish. This starter end cover dresses the end of the starter motor for a clean look on all 2017-up FLT models. 2017-UP FLT

FLT starter motor end cover kit features a chrome finish. This starter end cover dresses the end of the starter motor for a clean look on all 2017-up FLT models. 2017-UP FLT

FLT steel front apron-less fender wraps almost 180° around the front tire for a clean custom appearance. Features a low profile cutaway design exposing the wheel from the hub to the rim for maximum visual impact. Pre-drilled to fit Original Equipment fender mounting bosses and does not require additional fender spacers or install kits. 2014-UP FLT models equipped with 17 18" and 19" wheel and tire combo's" 2014-UP FLHT 2014-UP FLHX

Flush lens deco lamps with a 12 volt 5 watt clear bulb and red lens. *NOTE: For show or decorative use only and are not D.O.T. approved. Custom application for flush mounting

This flush mount front axle kit is a new way to dress up your front wheel without the hex nut and lug sticking out. The kit includes two chrome washers and two chrome flat head screws. 2000-2007 FLT

This flush mount front axle kit is a new way to dress up your front wheel without the hex nut and lug sticking out. The kit includes two chrome washers and two chrome flat head screws. 2008-UP FLT

Chrome 1-1/4 flyer style handlebar is indented and drilled for internal or external wiring with pull wire included. Bottom mount spacing width measures 3-1/2 center to center. *Note: UPS may consider this part as packaged oversize for shipment as compared to the actual weight which will result in higher shipping costs. 1982-1984 FL 1982-1984 FX 1982-UP XL 1986-2017 FLST 1984-2017 FXST 1982-1994 FXR 1991-2017 FXD 1982-2007 FLT

Flying fender medallion features bright plating on the tip design that matches the original. Includes two #8-32 studs for 3/8 long mounting. Custom application

.110 thick flywheel thrust washers constructed of steel. Sold as a pack of 5. 1930-1934 VL 1936-1952 EL 1937-1948 UL 1941-1954 FL

Foam battery pad set fits 6 Volt H-2 CB2-6 batteries. 1929-1952 WL 1929-1930 J 1930-1934 VL 1936-1940 EL 1941-1964 FL 1938-1948 UL

Fold out kick starter arm features a black finish and accepts standard kick pedal assemblies. Must order pedal assembly separately. 1954-1984 FL 1957-1979 XL

Fold out kick starter arm is constructed of steel and features a chrome finish. Order kick pedal sepearately. Order kick starter pedal assembly separately. 1954-1984 FL 1970-1984 FL 1957-1979 XL 1971-1984 FX

Includes bracket and cable allowing for the use of police clutch on models where the clutch cable goes directly into the transmission side cover. Custom application

Foot clutch friction disc cover with gloss black finish. Restoration quality foot clutch cover is exact replica for 1936 E and 1938 EL and UL models. Cover mounts with single screw only top is secured by fitting over the spring stud. There is an extruded hole for the spring stud. 1938-1939 WL