All

DRAG SPECIALTIES Black Standard Forward Control Conversion Kit, Anodized, Harley 11 - 15 XL

• Late-model XL models with forward controls no longer allow the fitting of standard rider footpegs; these kits let you mount standard footpegs on the late model XLs with forward controls
• Also works as replacement footpeg mounts on select OEM and Drag Specialties forward control kits for 04-16 XL models
• Kits includes a left and right footpeg mount in either chrome or anodized black finish complete with mounting hardware
• Available in standard length or +2 extended length

DRAG SPECIALTIES Black Sweeper Brake Pedal, Harley 84-15 FL

• Stamped steel construction, available with a chrome or black finish
• Driver floorboards have built-in vibration isolating dampeners
• Floorboard inserts are rubber-coated with chrome trim
• Driver floorboards come with mounting hardware
• Matching passenger floorboards and brake pedal pad are available separately
• Floorboards sold in pairs
• Brake pedal pad sold each

DRAG SPECIALTIES Black Top Mount Headlight Assembly

• Top-mount design
• Available with a chrome or black housing
• Include a 55/60W H4 bulb
• DOT compliant
• Made in the U.S.A.

DRAG SPECIALTIES Black Transmission Side Cover, Harley 06-16 FX 07-16 FL

• Made from die-cast zinc and available in a chrome or black finish
• Mount with existing hardware

DRAG SPECIALTIES Black Turn Signal Swivel Kit, Harley 88-16 FX 86-16 FL 88 - 16 XL

• Available in chrome or black
• Swivels are CNC-machined steel
• Replaces stock zinc swivel
• Sold as a set for both sides

DRAG SPECIALTIES Black Universal 8.8mm Spark Plug Wire Set, ignition boot angle 180-90

• Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance
• Rated at SAE Class E J2031 with a continuous operating temperature of 450 F
• Made in the U.S.A.

DRAG SPECIALTIES Black Universal 8.8mm Spark Plug Wire Set, length 40"

• Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance
• Rated at SAE Class E J2031 with a continuous operating temperature of 450 F
• Made in the U.S.A.

DRAG SPECIALTIES Black Universal Twin Cam 8.8mm Spark Plug Wire Set, ignition boot angle 180-90

• Constructed with silicone throughout the jacket, insulation and core to deliver high-temperature resistance
• Rated at SAE Class E J2031 with a continuous operating temperature of 450 F
• Made in the U.S.A.

DRAG SPECIALTIES Black Vinyl Coated Stainless Steel Hydraulic Clutch Line, length 76 1/8", size +6", Harley 13-14 FX 13-16 FL

• Feature clear-coated stainless steel or black vinyl-coated stainless steel lines with chrome steel fittings
• Available in stock and oversize lengths
• Made in the U.S.A.
• Meet DOT specifications

DRAG SPECIALTIES Black Vinyl Coated Stainless Steel Hydraulic Clutch Line, length 80 1/8", Harley 13-14 FX 13-16 FL

• Feature clear-coated stainless steel or black vinyl-coated stainless steel lines with chrome steel fittings
• Available in stock and oversize lengths
• Made in the U.S.A.
• Meet DOT specifications

DRAG SPECIALTIES Black Vinyl Coated Stainless Steel Hydraulic Clutch Line, length 82 1/8", size +12", Harley 13-14 FX 13-16 FL

• Feature clear-coated stainless steel or black vinyl-coated stainless steel lines with chrome steel fittings
• Available in stock and oversize lengths
• Made in the U.S.A.
• Meet DOT specifications

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, 58 11/!6", Each, Harley 07-13 FX

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
350 Cold Cranking Amps, 21 Amp Hours
8 ¹/₈ Long x 3 ⁷/₁₆ Wide x 6 ³/₈ Tall
Fits FLT, FLHT, FLHR 1980/1996
Terminal Location: - on FLH, + on RH
Replaces HD# 66010-82B
MG# YTX24HL-BS

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, Bottom, length 52 9/16", Each, Harley 71-86 FX 68-84 FL

These spark plugs are for the antique motorcycle enthusiast who enjoy riding. Spark plugs are air cooled with a heat range #3. Includes the brass top nuts which are used with earlier style terminals or hood style and sealing gaskets.
Terminal nut is

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, Bottom, length 53 5/16", Each, Harley 83-86 FX 83-86 FL

Acorn ignition system cover screws have a chrome finish.

HOUSING LENGTH	53-5/16"
TRAVEL	4-5/16"

FL 1970-1984
FX 1971-1984
FXST 1984-1998
FLST 1986-1998
FXR 1982-1994
FLT 1979-1998
XL 2004-UP
FXD 1991-1998

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, Center, length 60 5/8", Harley 87-94 FX 87 - 94 XL

Ignition system cover allen screw

FL 1979-1984
FX 1979-1984
FXST 1984-1998
FLST 1986-1998
FXD 1991-1998
XL 1979-1998
FXR 1982-1994
FLT 1979-1998

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, Center, length 63 11/16", Each, Harley 87-94 FX

OE side valve distributor shaft and housing

OEM: 32506-37

WL 1937-1952
G 1937-1957
UL 1937-1948

Tech Note:

Required to use #32-0134 retainer.

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 20 1/2", Harley 96 - 03 XL

• Plastic housing with mounting brackets are one piece molded designs and are less prone to vibration
• Metal housings with brackets are two piece designs
• Made in the USA

POWER HOUSE PLUS
30 amp metal with straight bracket

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 23 9/16", Each, Harley 04 - 16 XL

• Plastic housing with mounting brackets are one piece molded designs and are less prone to vibration
• Metal housings with brackets are two piece designs
• Made in the USA

POWER HOUSE PLUS
15 amp plastic with straight bracket

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 23 9/16", Each, Harley 86 - 03 XL

• Plastic housing with mounting brackets are one piece molded designs and are less prone to vibration
• Metal housings with brackets are two piece designs
• Made in the USA

POWER HOUSE PLUS
30 amp plastic

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 25 7/16", Each, Harley 05 - 16 XL

• Plastic housing with mounting brackets are one piece molded designs and are less prone to vibration
• Metal housings with brackets are two piece designs
• Made in the USA

POWER HOUSE PLUS
30 amp plastic with straight bracket

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 25 7/16", Each, Harley 07-07 FL

Features solid state components in generator end cover.
End cover has needle bearing installed for all 29975-65A 12 volt and 29975-61A generators.

FL 1965-1969
XL 1965-1981

Tech Note:

Suggested to use with #53-0505 mini batter

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 25 7/16", Each, Harley 08-16 FL

Main wiring harness features plastic covered wires. Main wiring harness only.
Handlebar, tail lamp, and turn signal wires must be ordered separately.
OEM: 70153-70

XLCH 1970-1971 Early 1971

Tech Note:

Suggested to use with #32

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 25 7/16", Each, Harley 87-06 FL

Starter lock plate.

OEM: 33126-94

FXST 1994-UP
FLST 1994-UP
FLT 1994-UP
FXD 1994-UP

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 31 1/2", Each, Harley 06-09 FX
Our batteries are made in the USA by Yuasa (except those noted with Import below). They are the same batteries that are made forHarley-Davidson^®. Our POWER HOUSE Standard line features patented separators that allow two extra plates per cell for 30% more power. Our POWER HOUSE Hi-Torque Low Maintenance line features 5% to 8% more cold cranking power than our standard high output series and less maintenance is required because of advanced lead calcium technology instead of conventional lead antimony, so water loss due to gassing is reduced by 90%. By incorporating the latest in battery technology, each POWER HOUSE and Hi-Torque battery delivers the ultimate in value.

Note: All Batteries are shipped dry without acid and include instructions on how to fill the battery with acid. Terminal hardware and a vent tube is also included. See electric section for POWER HOUSE PLUS Maintenance ree Batteries.

Note: Battery warranty is based on a six month pro-rated policy. OUR POLICY WILL ONLY COVER THE BATTERY OR 6 ULL MONTHS ROM THE DEALER'S INVOICED PURCHASE DATE.

Not Shippable by Air
POWER HOUSE
Fits all Sportster & X Kickstart models 1970/1978
74 Cold Cranking Amps, 7 Standard Amp Hours
5 3/8 Long x 3 Wide x 5 1/2 Tall
Terminal Location: + on FLH, - on RH
JIS# 12N7-4A, Replaces HD# 66006-70
(Imported)

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 31 1/2", Each, Harley 06-16 FX
Our batteries are made in the USA by Yuasa (except those noted with Import below). They are the same batteries that are made forHarley-Davidson^®. Our POWER HOUSE Standard line features patented separators that allow two extra plates per cell for 30% more power. Our POWER HOUSE Hi-Torque Low Maintenance line features 5% to 8% more cold cranking power than our standard high output series and less maintenance is required because of advanced lead calcium technology instead of conventional lead antimony, so water loss due to gassing is reduced by 90%. By incorporating the latest in battery technology, each POWER HOUSE and Hi-Torque battery delivers the ultimate in value.

Note: All Batteries are shipped dry without acid and include instructions on how to fill the battery with acid. Terminal hardware and a vent tube is also included. See electric section for POWER HOUSE PLUS Maintenance ree Batteries.

Note: Battery warranty is based on a six month pro-rated policy. OUR POLICY WILL ONLY COVER THE BATTERY OR 6 ULL MONTHS ROM THE DEALER'S INVOICED PURCHASE DATE.

Not Shippable by Air
POWER HOUSE
Fits L & FLH 1965/1984 & Sportster Electric Start 1967/1978 (Except XLCR)
240 Cold Cranking Amps, 28 Standard Amp Hours
8 1/16 Long x 5 3/16 Wide x 6 1/2 Tall
Terminal Location: + on FLH, - on RH
JIS# YHD-12, Replaces HD# 66007-84

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 31 1/2", Each, Harley 07-07 FX 07-16 FL
Our batteries are made in the USA by Yuasa (except those noted with Import below). They are the same batteries that are made forHarley-Davidson^®. Our POWER HOUSE Standard line features patented separators that allow two extra plates per cell for 30% more power. Our POWER HOUSE Hi-Torque Low Maintenance line features 5% to 8% more cold cranking power than our standard high output series and less maintenance is required because of advanced lead calcium technology instead of conventional lead antimony, so water loss due to gassing is reduced by 90%. By incorporating the latest in battery technology, each POWER HOUSE and Hi-Torque battery delivers the ultimate in value.

Note: All Batteries are shipped dry without acid and include instructions on how to fill the battery with acid. Terminal hardware and a vent tube is also included. See electric section for POWER HOUSE PLUS Maintenance ree Batteries.

Note: Battery warranty is based on a six month pro-rated policy. OUR POLICY WILL ONLY COVER THE BATTERY OR 6 ULL MONTHS ROM THE DEALER'S INVOICED PURCHASE DATE.

Not Shippable by Air
POWER HOUSE
CUSTOM APPLICATIONS
Fits Custom 12 volt applications where battery space is limited and early 6 volt Horseshoe Oil Tank
58 Cold Cranking Amps, 5.5 Standard Amp Hours
4 1/16 Long x 3 9/16 x Wide x 4 1/2 Tall
Terminal Location: - on FLH, + on RH
JIS# 12N5.5A-3B
(Imported)

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 32 15/16", Each, Harley 00-06 FX 00-06 FL

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
310 Cold Cranking Amps, 18 Amp Hours
6 ⁷/₈ Long x 3 ⁷/₁₆ Wide x 6 ¹/₈ Tall
Fits Softail 1991/Later, Dyna 1997/Later, Sportster 1997/2003
Terminal Location: - on FLH, + on RH
Replaces HD# 65989-97
MG# YTX20HL-BS

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 32 15/16", Each, Harley 92-05 FX

Generator screw, chrome finish.

XL 1957-1970

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 32 15/16", Each, Harley 95-97 FX

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
* 270 Cold Cranking Amps, 18 Amp Hours
6 ⁷/₈ Long x 3 ⁷/₁₆ Wide x 6 ¹/₈ Tall
Fits FXR 1982/Later, X Electric Start 4 speed 1973/1986, Softail 1984/1990, Sporster 1979/1996, XLCR 1977/1978
Terminal Location: + on FLH, - on RH
Replaces HD# 66672-96
MG# YTX20-BS

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 32 15/16", Each, Harley 99-06 FX

• Maintenance free design eliminates the need to ever add water to the battery
• Sealed enclosure allows mounting the battery in any position (except upside-down)
• To help improve vibration resistance, the battery acid is absorbed between the plates with fine microfiber glass mats (AGM)
• Internal gas pressure is valve regulated to prevent any water loss (VRLA)
• AGM & VRLA combined with lead-calcium grid plates provide more cold cranking amps than lead acid type batteries with up to three times the life span
• Includes a sulfation retardant that dramatically reduces the battery killing plate sulfation that is commonly associated with conventional batteries
• Extremely slow rate of self-discharge when not in use, but must be slow charged at least every three months if not in service
• Includes cable mounting hardware
• * Includes mounting kit with terminal cover and plastic bumpers

Important Note: These batteries include a separate battery acid pack and must be used to fill the battery before use (except 10023 and 10049, these come pre-filled and charged). The metered acid pack delivers the precise amount in a safe and controlled manner. illing and charging instructions are included.

Note: Battery warranty is based on a six month pro-rated policy. SIX MONTH BATTERY WARRANTY STARTS WHENEVER THE DEALER ILLS THE BATTERY WITH ACID AND SLOW CHARGES IT TO A RANGE O 12.8 THROUGH 13.2 VOLTS. Please call your salesperson for details.

Not Shippable by Air
POWER HOUSE PLUS
230 Cold Cranking Amps, 11.2 Amp Hours
6 Long x 3 ⁷/₁₆ Wide x 4 ³/₈ Tall
Fits Custom applications where size matters (Imported)
Terminal Location: + on FLH, - on RH
MG# YTZ14S

DRAG SPECIALTIES Black Vinyl High Efficiency Clutch Cable, clt adj location 32 5/16", Each, Harley 87-06 FX 87-06 FL

Decal set comes in a pair for both sides. Decal is silver with black lettering.
Includes decals for lights, turn L, turn R, horn, engine stop, and start.

FL 1972-1981
FX 1972-1981
XL 1972-1981

DRAG SPECIALTIES Black Vinyl Idle Cable, cruise ready, elbow 70, Harley 02-06 FL

• V-FACTOR regulators are available for mostHarley-Davidson^® models
• These high quality units have improved solid state circuitry and high performance components that guarantee superior performance and reliability
• All semi-conductors are USA made
• Connectors and terminals on 1997/Later applications are from Deutsch and Delphi
• See below for availability of finishes
• See additional images for plug type

V-FACTOR
Chrome Plated, 22 amps
Fits Big Twin 1981/1988
Replaces HD# 74516-86

DRAG SPECIALTIES Black Vinyl Idle Cable, cruise ready, elbow 70, Harley 02-07 FL

• V-FACTOR regulators are available for mostHarley-Davidson^® models
• These high quality units have improved solid state circuitry and high performance components that guarantee superior performance and reliability
• All semi-conductors are USA made
• Connectors and terminals on 1997/Later applications are from Deutsch and Delphi
• See below for availability of finishes
• See additional images for plug type

V-FACTOR
Black Anodized, 32 amps
Fits Softail 1989/1999, FXR 1989/1994, FLT models 1989/1996 (except EI) & Dyna 1991/1998
Replaces HD# 74519-88

DRAG SPECIALTIES Black Vinyl Idle Cable, cruise ready, elbow 70, Harley 96-01 FL

• V-FACTOR regulators/rectifiers are available for mostHarley-Davidson^® models
• These high quality units have improved solid state circuitry and high performance components that guarantee superior performance and reliability
• All semi-conductors are USA made
• Connectors and terminals on 1997/Later applications are from Deutsch and Delphi
• See below for availability of finishes
• See additional images for plug types

V-FACTOR
Black Anodized, 32 amps
Fits Dyna 1999/2003 & Softail 2000
Replaces HD# 74518-99 & 74561-99A