Belt Dr Part Quiet Cl Steel Bdl Sys Round Dog Dr Rr Pulley 7 Steel Clutch Plt Ercs-100 Designed to help quiet the rattle that is normally associated with open belt drives or closed belt drives with vented covers. Normally the friction plates are splined to the inner clutch hub, but the quiet clutch friction plates incorporate a round dog drive to the outer clutch basket. The friction plates are bonded to aluminum for light weight. See below for availability of plate material. Fits all Round Dog type BDL Belt DrivesBelt Drives Ltd. Clutch riction Plate Kit Includes: 7 Splined Steel Plates (.060 thick)
Belt Drive Belt Guide Plate Front Outside Of Pulley 8 & 11 Mm Belt Drives Anodized Steel Stamped steel and anodized. It contours to the front pulleys and helps guide the belt as well as protecting the alternator from belt rub. Used on all of our 1 1/2 8mm and 11mm front pulleys except early tapered shaft.Guide fits outside of pulley. This guide is standard with all our kits. Guide assures 100% belt to pulley contact.
V-Twin Manufacturing Front Belt Lock Plate And Nut Kit 93-06 XL - Kit Front Belt Lock Plate and Nut Kit includes 2 allen screws, Sprocket lock nut and lock plate. Fits 1993-up Big Twin and 1991-up XL models.
Belt Drive Part, Rear Clutch Basket Fits All Top Fuel Belt Drive Kits Tfrp-46 The 14mm by 3 3/8 belt is the same that the top fuel racers use on their 600 plus horsepower machines. This kit is designed for oil filter (included) mounting in the motor plate. Kit is the complete drive with outboard bearing supports. The outboard bearing support has one bearing to support the transmission mainshaft. The outboard support plate is reversible. The back side is channeled for another distinct look, but just the flat side will be polished.
14mm x 85mm (3 3/8) wide belt, the same belt as used on top fuel Harley-Davidson® race bikes
Kevlar clutch has nine 6 3/8 diameter frictions & eleven steels for ultimate power transfer
Speciallly manufactured pressure plate uses up to 9 springs for infinite clutch pressure control
Hub is manufactured from 7075 aluminum and hard anodized for maximum strength and longevity
Belt Drive Belt Guide Plate Front Inside Of Pulley 8 & 11 Mm Belt Drives Anodized Steel Stamped steel and anodized. It contours to the front pulleys and helps guide the belt as well as protecting the alternator from belt rub. Used on all of our 1 1/2 8mm and 11mm front pulleys except early tapered shaft.Guide fits inside of pulley.
Belt Drive Part Offset Insert Uw/#77332 Or #77425 Fr Pulley 1"Offset & Mtg Hrdw In-1000 These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.1 offset insert and mounting hardware. Steel.
Belt Drive Part,Fr Pulley 8Mm 3"Wide Bt W/Tapered Eng Shaft Open Primary Belt Drive..47T-3
These 8mm, 47 tooth engine pulleys are direct replacement parts for Belt Drives Limited (BDL) primary belt drive kits
All pulleys are hard anodized aluminum with cast-in steel inserts to maximize the lifespan and provide the greatest weight to strength ratio
Each pulley includes a mounting nut and washer
Fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1984 as listed.Belt Drives Ltd. 3 Wide 8mm Pulley Pulley kit fits Big Twin 4 speed kickstart models with 10 spring type clutch 1937/1954 with tapered sprocket engine shaft fits kit 77010
V-Twin Manufacturing Rear Axle Spacer Set 1" inner diameter bearings,fits 3/4" axle - PR Rear Axle Spacer Set 1" Inner Diameter Rear axle long style spacer allows wheels with 1" inner diameter bearings to fit 3/4" axle. Spacer is 1-1/8" long with exposed shoulder area 1". Fits: Custom application Finish:
V-Twin Manufacturing Rear Pulley Bolt and Washer Kit Allen Style - Kit Rear Pulley Bolt and Washer Kit Allen Style Polished rear pulley bolt and washer kit is allen type with a 7/16-14 x 1-3/4" thread size. Fits Harley-Davidson models: FXST 1993-1996 cast wheel FXD 1997-1998 cast wheel FL
V-Twin Manufacturing Belt Drive Bearing Support, 1965-84 BT - Sold Each Bearing Support when cast aluminum Inner Primary Cover is removed for installation of open belt drive on 1965-1984 model Big Twin 4 speed, the main shaft requires additional support.Item: Chain type fits with belt front & rear chain drive