Best selling products

Brake Disc,Solid 11.5" Od Rr Fx 4Spd 81/86 Fxr 82/L,St84/91 Spt 79/91 Flhs 81/84 Fxwg81/86

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Solid 11 ¹/₂ O.D. & 2 I.D. Disc
C mount hole style & ³/₈ bolt size
Fits X, XWG Rear 1981/1986, FXR Rear 1982/1991*, FLHS Rear Late 1981/1984, Softail Rear 1984/1991*, Sportster Rear 1979/1991*
Replaces HD# 41789-79A
(Imported)
* Will also fit 1992/1999 models if our 57123 mounting hardware is used

Brake Rotor, Drilled Ss 11.5" Fx XL Front 74/77 Ss Rpls Hd 41807-74

• Imported discs are made with high quality SAE 1010 IV 1020 steel or S420J2 stainless steel to be economical yet have very strong and dependable performance
• Discs are drilled for heat dispersion, weight reduction, wet weather braking and are compatible with all types of disc brake pads
• See Additional Images for illustration of mount hole style

Note: Always install new brake pads with new brake discs to ensure maximum disc pad and disc life. See the wheel section for brake pads.V-FACTOR
Drilled Stainless Steel 11 1/2 O.D. Disc
Fits X, Sportster ront 1974/1977
Replaces HD# 41807-74
(Imported)

Axle Spacer,Front & Rear Fr Fl 73/85 Fxwg 80/L Rr Spt 79/89 Rpl 41594-73 Cp .7145C

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

HARDWARE
Chrome Plated .653 long Non-Stepped Axle Spacer
Fits left on L, FLH 1973/1982 front & rear, left on XWG 1980/1983 front, left on Sportster 1979/1999
Replaces HD# 41594-73 (left)

Axle Spacer,Rear Left Side Bt 4 Spd 73/85 Rr Chain Chrome Rpls Hd 41595-73 Mfg.7148C

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

HARDWARE
Chrome Plated .835 long Non-Stepped Axle Spacer
Fits L 4 speed with rear chain 1973/1985, X, XWG 1973/1983, XE, XST 1984/1985, XE 80ci 1981/1985, L 1973/1982
Replaces HD# 41595-73

Rr Axle Converter Kit Chrome Swingarm Disc Brake Axle To Rigid Frame Disc Brake
This is a collection of axles and spacers for custom applications.V-FACTOR
Chrome Plated Rear Axle Converter Kit converts stock Big Twin swingarm disc brake rear axle to fit a rigid frame so you can easily install disc brake with no alteration to axle or frame
(Imported)

Rear Axle Kit, Chrome Plated Softail Models 2000/2006, Inc Chrome Plated Hardware

• Machined from the best material available to demanding tolerances to exceed OE specifications
• Axle spacers are used to properly center the wheel hub
• Axles and parts are also available separately (Axle nuts that are sold separately are zinc plated)

V-FACTOR
Axle Kit with Chrome Hardware
Fits Softail all models 2000/2006
(Imported)

Wheel, Billet Hub 60 Spoke All 79/99 Rear 16 X 3.5 Chrome, Billet Hub

• Drop center steel rims
• Chrome spokes
• Custom billet aluminum hubs are Show Chrome plated
• Includes bearings and seals
• * When replacing models equipped with 19 wheels with these 21 wheels, you must mock-up wheel without the tire mounted and check for wheel spokes to brake caliper clearance. If wheel spokes contact the brake calipers, you much purchase custom shallow back brake calipers

V-FACTOR
Billet Hub with 60 Spokes
Rear, Dual 7/16 - 3/8 Flange
Tapered 3/4 Bearing
16 x 3.5 Size
Fits all models 1979/1999

Brake Hose Asy,Pro-Swivel 48" Clr Coat,Inc Straight 7/16" Id Banjo & 90 Degree Ends R08977

• Russell Pro Swivel^™ Brake Hoses feature our exclusive 360° swivel banjo system (Patent Pending)
• Pro Swivel^™ banjo is incorporated at the caliper end of the hose assembly making rotation alignment hassle free
• Uses stock hardware and mounting locations

Russell
48 Long Brake Hose
Straight 7/16 ID Banjo x 90°

Speedometer Cable,Vinyl 40"Lg 12Mm Top Spdo Nut/Fr Whl Drive 67060-79B 67060-87A 67072-79A
These cables for Harley-Davidson^® speedometers fall into three groups depending on upper and lower end fittings. In order to simplify the listing of these cables, we have listed them in the charts below in sequence by type housing and length. If extra length is needed just order longer length in the same group. By using this listing method we are able to reduce part numbers. Those parts with * have nylon lined housings and are manufactured by Motion-Pro in the USA.Motion Pro *
Black Vinyl covered, 40 housing length
12 mm Top Nut for small speedometers. No Nut for front wheel drive
Fits XLS 1979/1982, FXR 1982/1983, FXRP 1984, FXRS 1982/1983
Replaces HD# 67060-79B, 67060-87A & 67072-79A

Instrument Panel Kit,Late Type Kit For 2 Pc Fatbob Gas Tank 2:1 Ratio Spdo,Ign Sw & Hrdw

• Include cover, speedometer, ignition switch, base plate, tripometer reset knob and mounting hardware in an attractive display box
• All kits fit aftermarket and 1947/1990 at Bob tanks (solid mount and flatside)

V-FACTOR
Chrome Plated Late Model Kit
2:1 Ratio
Fits at Bob tanks 1947/1990
(Imported)

Replacement Oval Mirror Fits All Models Rpls Hd 91965-98
V-FACTOR
Chrome Plated Pair
Fits all models
Replaces HD# 91695-98
(Imported)

Pro II Brk Sys Fitting -3 Male Adapter Uw#49510 Brk Hose Brk Tee/Banjo End Russell R4344C

• Russell's Pro System II hose and fittings are designed for custom builders that need to easily fabricate brake or hydraulic clutch lines
• The cut to length semi-rigid black nylon hose has a ³/₁₆ O.D. for a low impact custom look yet provides improved braking effect with the same lever pressure as OE size hose. Hose is not DOT approved
• The chrome plated steel compression fittings (sold separately) are available to replace ³/₈-24 & ⁷/₁₆-24 banjo bolts as listed. The ¹/₈-27 NPT compression fittings are designed for early style or custom brake hoses drilled and tapped for pipe thread
• The 45870 male adapter end is designed for use with -3 male adapter banjo ends or brake tees found in the control section when required

Russell
-3 Male Adapter for Banjo Ends or Brake Tees

Master Cyl Rebuild Kit, Front Fl 72/81, Fx XL 73/81 Rpls Hd 45063-72 No Gasket
V-FACTOR
Front Brake Master Cylinder Rebuild kit (without gasket) fits handlebar mounted master cylinders on L models 1972/1981, X & Sportster models 1973/1981
Replaces HD# 45063-72
(Imported)

Master Cyl Parts,Fr Rebuild Fl 1972/1981 Fx Spt 1973/1981 Replaces Hd 45063-72
V-FACTOR
Front Brake Master Cylinder Rebuild Kit fits handlebar mounted master cylinder on L models 1972/1981, X & Sportster models 1973/1981
Replaces HD# 45063-72
(Imported)

Rear Brake Master Cylinder,Cp Touring Models 2008/Later* Rpls Hd 41763-08B

• aithful reproduction of the OE rear master cylinder for Touring models
• See below for availability of finishes and replacement parts

V-FACTOR
Chrome Plated Master Cylinder
Fits Touring models 2008/Later
Replaces HD# 41763-08B

Shifter Anti-Rattle Kit Chrome Flt 84/L* Heel/Shifter Removed W/Hrdw & Instructions
Stop that annoying shifter rattle with this custom spacer and shim kits from Stevenson's Cycle. Manufactured in the USA, these kits replace the dull finish stock spacer with a chrome plated spacer and wave washer. In addition, these kits reduce pre-mature wear of the shifter linkage, stabilize the transmission. Installation instructions included. Stevenson's Cycle
Chrome Plated
Fits FLT models 1984/Later Toe Shifter only when Heel Shifter has been removed

Foot Lever,Shifter Chrome Flt Models 1983/Later* 8-1/2" Long, Extended Reach

• Extended foot shift lever is 8 1/2 long for a more comfortable foot position
• Sold Each

V-FACTOR
Chrome Plated Lever
Fits FLT models 1983/Later & LST 1986/Later