Best selling products

• Fits 96-09 OEM-style covers that do not have a sight glass (except 08-09 Dressers, 04-09 XL)
• Sold each

• Kit includes screws and seal washers

• Kit includes screws and seal washers

• Kit includes screws and seal washers

• Kits include gaskets, washers and heavy-duty hex or acorn nuts
• Made in the U.S.A. by James Gaskets

• Kits include gaskets, washers and heavy-duty hex or acorn nuts
• Made in the U.S.A. by James Gaskets

• Kits include gaskets, washers and heavy-duty hex or acorn nuts
• Made in the U.S.A. by James Gaskets

• Kits include two flanges and two retaining rings
• Available in standard chrome or polished stainless steel
• Heavy-duty kit has thicker flanges for less distortion
• Replacement retaining rings can be purchased separately

• Selection of high-quality Genuine James gaskets, seals and O-rings
• Our deep inventory, wide selection, fast shipping and friendly service makes stocking easy
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• High-quality products for long-term reliability
• Manufactured from premium fuel-resistant materials that will not creep, crack or become brittle
• Gaskets available in multiple types to best suit the intended application
• Extreme Sealing Technology (EST) gaskets feature embossed steel gaskets covered with a proprietary rubber material or solid copper, depending on the application
• Multi-Layer Steel (MLS) gaskets feature two outer Viton-coated embossed spring steel layers with an inner steel layer to provide additional support
• CFM is a composite material with a steel tang center laminated to provide excellent heat tolerance without delaminating while providing a long lasting seal
• Single-Layer Steel (SLS) gaskets feature a stainless steel core and embossed outer surfaces that create a heavy-duty seal between the center steel layer and the gasket mating surfaces
• Aluminum Foamette Material (AFM) gaskets feature an aluminum core and a chemically blown, compounded nitrile synthetic rubber coating that is bonded to the outside layer; do not require gasket sealer
• Viton gaskets feature a stainless steel core with a .001" thick coating of Viton rubber on both sides
• Made in the U.S.A.

• Positive O-ring seal ensures leak-free operation
• Can be installed with the stock engine in the frame in most applications
• Include rocker boxes, gaskets and mounting bolts
• Assembler must supply rocker shafts and rocker arms for all rocker boxes
• Rocker arm supports included
• Installation on Buell models requires removal of some material from the front motor mount
• Made in the U.S.A.

• Contain the best quality gaskets available
• Available in top-end or lower-end kits
• Made in the U.S.A.

• Kit includes 3/8" fiber insulator block and gaskets
• Designed to reduce the risk of boiling fuel in the carb
• Made in the U.S.A.

• Top-quality gaskets are available as motor sets or top end sets
• Contain gaskets, oil seals and O-rings necessary to completely rebuild an Evolution or Twin Cam engine
• Made in the U.S.A.

• Top-quality gaskets are available as motor sets or top end sets
• Contain gaskets, oil seals and O-rings necessary to completely rebuild an Evolution or Twin Cam engine
• Made in the U.S.A.

• Make parking anywhere possible
• Constructed from lightweight aluminum, chromed and zinc-plated
• Equipped with an electronic cut-off switch to protect transmission from operator error
• No exhaust modification needed when used with OEM exhaust
• Do not affect forward gear operations
• Clutch-operated, eliminating any strain on the electrical system
• Plug-and-play harness, all installation tools and instructions included
• Made in the U.S.A.

MOTOR TRIKE Mechanical Reverse Kit With Electronic Cut-Off Switch,

NOTE: Softail models may require steel-braided oil lines to route around reverse component,

• Make parking anywhere possible
• Constructed from lightweight aluminum, chromed and zinc-plated
• Equipped with an electronic cut-off switch to protect transmission from operator error
• No exhaust modification needed when used with OEM exhaust
• Do not affect forward gear operations
• Clutch-operated, eliminating any strain on the electrical system
• Plug-and-play harness, all installation tools and instructions included
• Made in the U.S.A.

• Make parking anywhere possible
• Constructed from lightweight aluminum, chromed and zinc-plated
• Equipped with an electronic cut-off switch to protect transmission from operator error
• No exhaust modification needed when used with OEM exhaust
• Do not affect forward gear operations
• Clutch-operated, eliminating any strain on the electrical system
• Plug-and-play harness, all installation tools and instructions included
• Made in the U.S.A.

• Make parking anywhere possible
• Constructed from lightweight aluminum, chromed and zinc-plated
• Equipped with an electronic cut-off switch to protect transmission from operator error
• No exhaust modification needed when used with OEM exhaust
• Do not affect forward gear operations
• Clutch-operated, eliminating any strain on the electrical system
• Plug-and-play harness, all installation tools and instructions included
• Made in the U.S.A.

• Make parking anywhere possible
• Constructed from lightweight aluminum, chromed and zinc-plated
• Equipped with an electronic cut-off switch to protect transmission from operator error
• No exhaust modification needed when used with OEM exhaust
• Do not affect forward gear operations
• Clutch-operated, eliminating any strain on the electrical system
• Plug-and-play harness, all installation tools and instructions included
• Made in the U.S.A.

• Knurled and slotted head for easy adjustment
• Includes brass or stainless-steel screw, O-ring, washer and spring
• Made in the U.S.A.

• Electropolished stainless steel for a great custom look
• Will not corrode in extreme climates
• Longer and stronger than the stock screws, makes them easier to handle; will not round off
• 5/16" hex head design eases bowl removal and jet changing
• Made in the U.S.A.

• For stock and S&S fuel system applications
• Kits include filter and hardware
• Built-in stinger cone directs air smoothly into the bore of the carburetor or EFI throttle body and reduces turbulence and increases flow

• Chrome one-piece steel construction
• Wide, deep radiused slot accepts quarter or flat screwdriver
• Raised diamond knurl on edge
• 1/8" longer for easier seat installation with saddlebags or luggage racks
• Includes nylon washer
• Made in the U.S.A.

• Chrome one-piece steel construction
• Wide, deep radiused slot accepts quarter or flat screwdriver
• Raised diamond knurl on edge
• 1/8" longer for easier seat installation with saddlebags or luggage racks
• Includes nylon washer
• Made in the U.S.A.

• Each assembly includes a pickup, mounting plate and wires with connectors

• Each assembly includes a pickup, mounting plate and wires with connectors

• Each assembly includes a pickup, mounting plate and wires with connectors

• Assemblies include pickup, mounting plate and wires with connectors

• Assemblies include pickup, mounting plate and wires with connectors

• Assemblies include pickup, mounting plate and wires with connectors