Name: Ribbed Mustang Tank Custom Applications Raw Tank W/Screw Type Gas Bung
Brand: Mid-USA
SKU: MID-81001
Price: 215.95 USD
Availability: InStock

Mid-USA

Ribbed Mustang Tank Custom Applications Raw Tank W/Screw Type Gas Bung

MID-81001

$215.95

In Stock

Shipping calculated at checkout.

Ribbed Mustang Tank Custom Applications Raw Tank W/Screw Type Gas Bung

Old School Ribbed Style
Tanks measure approximately 17 long x 11.5 wide with a 2 tunnel
3.3 gallon capacity
³/₈ NPT gas outlet on right side
Rear of tank has ¹/₄ crossover outlets
See the frame section for matching ribbed front fenders

V-FACTOR
Ribbed Tank with Screw-In Bung
(Imported)

Mid-USA

Keyless Quick Release,Black Touring Models 92/L* Fuel Door Rpls Hd 53919-04A

MID-80687

$33.70

In Stock

Shipping calculated at checkout.

Keyless Quick Release,Black Touring Models 92/L* Fuel Door Rpls Hd 53919-04A

No more fumbling around for keys at the gas pump
Replace your fuel door lock with this push to open quick release button operated mechanism

V-FACTOR
Black uel Door Quick Release
Fits Touring Models 1992/Later
Replaces HD# 53919-04A

Mid-USA

Hex Type Float Bowl Screws,Ss Keihin Cv40 Cv44 Cv51 & Mikuni Hsr42 Hsr45 Hsr48...Fbs-Cv/Hsr

MID-80673

$33.55

In Stock

Shipping calculated at checkout.

Hex Type Float Bowl Screws,Ss Keihin Cv40 Cv44 Cv51 & Mikuni Hsr42 Hsr45 Hsr48...Fbs-Cv/Hsr

Makes jet changes fast and easy
Gives your carburetor a drag race look
Made from 300 series stainless steel

Yost
Polished Stainless Steel Screws
Fits Keihin CV & Mikuni HSR carburetors

Mid-USA

Gas Tank Mt Brackets W/Bolts Tunnel Tanks W/Recessed Mounts See Catalog For Fitment

MID-80668

$28.20

In Stock

Shipping calculated at checkout.

Gas Tank Mt Brackets W/Bolts Tunnel Tanks W/Recessed Mounts See Catalog For Fitment

Designed for custom frames with stretched backbones that will accept 25.5 tunnel length (tunnel measures 2 ¹/₂ wide)
Weld-to-frame brackets recess in the bottom of the tank for a hidden look
Rubber isolated mounting brackets to prevent vibration cracks
See below for availability of gas caps
Tapped ³/₈-24 NPT at rear of tank for crossover line (not included)
Use with ¹³/₁₆ (22mm) fuel valve

Note: These tanks must be pressure tested, sealed and pre-mounted on frame to verify compatibility of all related parts before painting.V-FACTOR
Replacement Crossbar Kit (weld to frame)
Includes brackets, rubber isolators & mounting bolts (weld-in bungs not included)

Mid-USA

Gas Tank Mounting Kit, Cp Fits Sportster 1996/2003 Acorn Style Nuts,Mfg# 2107-16

MID-80646

$39.95

In Stock

Shipping calculated at checkout.

Gas Tank Mounting Kit, Cp Fits Sportster 1996/2003 Acorn Style Nuts,Mfg# 2107-16
Colony
Fits Sportster models 1996/2003

Mid-USA

Gas Tank Mount,Flatside Fatbob Fl FX 4 Speed 1958/1984 Late Tank To Early Model Frame

MID-80641

$90.60

In Stock

Shipping calculated at checkout.

Gas Tank Mount,Flatside Fatbob Fl Fx 4 Speed 1958/1984 Late Tank To Early Model Frame
If you can't fix the problem at the source, get rid of it. No longer will your original style at Bob tank leak or break welds. This gas tank mounting kit lets you install late model 2 piece latside at Bob rubber mount tanks with screw-in caps and all the other niceties giving you one less problem to deal with. Easy to install and requires minimal welding. Installation instructions included along with all mounting hardware, tank grommets and mounting brackets.V-FACTOR
Fits L, X 4 speed frames 1958/1984
(Imported)

Mid-USA

Stud,Rubber Mounting Super Custom Use & Oil Or Gas Tank 1/4-20X1/2" Rpls Hd 62563-65

MID-80627

$32.20

In Stock

Shipping calculated at checkout.

Stud,Rubber Mounting Super Custom Use & Oil Or Gas Tank 1/4-20X1/2" Rpls Hd 62563-65

Rubber mounts designed to help isolate vibration transmitted to the battery carrier tray
Also used for mounting instrument dash panels and oil tanks
All American made (D&S Performance mounts exceed OEM specifications and feature a manufacturer's two year warranty

V-FACTOR
OE style Super/Heavy Duty with internal spring welded to each stud plate
Thread Size & Length: 1/4-20 x 1/2 Male/Male Mount
Fits Big Twin 4 speed 1965/1986, XLH 1967/1978, XLCH 1970/1978
Package of 10
Replaces HD# 62563-65

Mid-USA

Rubber Mounting Stud,Hvy Duty BTy Box,Oil Tank & Custom Use 1/4-20 X 1/2"&1/4-20 X 3/4"

MID-80672

$4.65

In Stock

Shipping calculated at checkout.

Rubber Mounting Stud,Hvy Duty Bty Box,Oil Tank & Custom Use 1/4-20 X 1/2"&1/4-20 X 3/4"

Designed to help isolate the vibration that is transmitted to the oil tank
Also used for battery carrier trays, instrument dash panels and custom oil tanks
All mounts are made with an exclusive rubber compound and feature heat-treated steel studs that exceed OEM specifications
Heavy-duty mounts are absolutely the strongest available with their superior tensile strength, shear resistance and anti-sag qualities
Mount bodies are 1 long x 1 O.D.
Manufacturer's 2 year warranty
Sold Each

D&S Performance
Heavy Duty, Thread Size & Length: 1/4-20 x 1/2 male & 1/4-20 x 3/4 male
or custom use where a longer stud is required at one end
Replaces HD# 62563-65

Mid-USA

Heavy Duty Mounting Studs BTy Box,Oil Tank & Custom Use 1/4-20X1/2",Hd 62563-65,Ds-104

MID-80669

$8.60

In Stock

Shipping calculated at checkout.

Heavy Duty Mounting Studs Bty Box,Oil Tank & Custom Use 1/4-20X1/2",Hd 62563-65,Ds-104

Designed to help isolate the vibration that is transmitted to the oil tank
Also used for battery carrier trays, instrument dash panels and custom oil tanks
All mounts are made with an exclusive rubber compound and feature heat-treated steel studs that exceed OEM specifications
Heavy-duty mounts are absolutely the strongest available with their superior tensile strength, shear resistance and anti-sag qualities
Mount bodies are 1 long x 1 O.D.
Manufacturer's 2 year warranty
Sold Each

Standard Duty, Thread Size & Length: 1/4-20 x 1/2 Male/Male Mount
Fits Big Twin 4 speed 1965/1986, XLH 1967/1978, XLCH 1970/1978
Replaces HD# 62563-65

Mid-USA

Universal In-Line Fuel Filter Fits 1/4",5/16"Or 3/8"Id Hose Glass Body W/Chrome Ends

MID-80345

$11.75

In Stock

Shipping calculated at checkout.

Universal In-Line Fuel Filter Fits 1/4",5/16"Or 3/8"Id Hose Glass Body W/Chrome Ends

Includes 1/4, 5/16 and 3/8 plastic fuel line nipples
Body measures 1 5/8 long
ully serviceable with removable filter screeen for easy cleaning

V-FACTOR
Glass body with chrome ends

Mid-USA

Gas Cap Cover Kromett Chrome Fits 2-9/16"Od Caps 1936/E1973 W/ Allen Screws To Install

MID-80100

$19.60

In Stock

Shipping calculated at checkout.

Gas Cap Cover Kromett Chrome Fits 2-9/16"Od Caps 1936/E1973 W/ Allen Screws To Install

Kromett covers are die cast
Covers attach to gas cap with allen screws
Sold each

V-FACTOR
Chrome Plated Cover
Fits 1936/Early 1973 Caps & Caps with 2 9/16 O.D.

Mid-USA

Gas Cap Domed 1/8"Tk Knurled All Models 1982/L* Vented Only Chrome Aluminum

MID-80083

$24.25

In Stock

Shipping calculated at checkout.

Gas Cap Domed 1/8"Tk Knurled All Models 1982/L* Vented Only Chrome Aluminum

Covers are CNC machined from billet aluminum
All caps are non-ratcheting
Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Plated Dome Style Vented Cap Only
With ¹/₈ Thick Knurled Edge
(Imported)

Mid-USA

Gas Cap Point 1/8"Tk Knurled All Models 1982/L* Vented Only Chromed Aluminum

MID-80081

$22.05

In Stock

Shipping calculated at checkout.

Gas Cap Point 1/8"Tk Knurled All Models 1982/L* Vented Only Chromed Aluminum

Covers are CNC machined from billet aluminum
All caps are non-ratcheting
Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Plated Point Style Vented Cap Only
With ¹/₈ Thick Knurled Edge
(Imported)

Mid-USA

Gas Caps Point 1/8"Tk Knurled All Models 1982/L* W/Dual Caps Chromed Aluminum

MID-80080

$43.30

In Stock

Shipping calculated at checkout.

Gas Caps Point 1/8"Tk Knurled All Models 1982/L* W/Dual Caps Chromed Aluminum

Covers are CNC machined from billet aluminum
All caps are non-ratcheting
Vented caps are designed to vent in both directions to prevent excessive gas tank pressure build up

V-FACTOR
Chrome Plated Point Style Cap Set
With ¹/₈ Thick Knurled Edge
(Imported)

Mid-USA

Gas Cap W/Paint Saver Ring Set Fatbob Models Rh/Lh 82/L*(Ex W Fuel Gauge

MID-80042

$187.05

In Stock

Shipping calculated at checkout.

Gas Cap W/Paint Saver Ring Set Fatbob Models Rh/Lh 82/L*(Ex W Fuel Gauge

Tamper resistant cap mounts flush with the paint saver ring and requires the spanner key for isntallation and removal of the cap
CNC machined from billet aluminum
Seals are made from fuel resistant viton
The low profile paint saver houses the 1 ¹/₂ diameter locking gas cap

V-FACTOR
Chrome Plated
Left hand & right hand (Set)
Fits at Bob tank models 1982/Later
(Imported)

Mid-USA

Spinner Gas Cap Vented Cp Fits 81087/93 89900-902 Gas Tanks & #80026 Bung

MID-80025

$61.20

In Stock

Shipping calculated at checkout.

Spinner Gas Cap Vented Cp Fits 81087/93 89900-902 Gas Tanks & #80026 Bung

Kit requires a 1 ¹³/₁₆ I.D. hole in the gas tank for the steel bung to be welded in
Vented gas cap is machined from billet aluminum and includes a sealing O ring
Cap measures 1 ¹/₄ tall & has a 3 ³/₄ circumference at the spinners

V-FACTOR
Replacement chrome plated Spinner cap with sealing O ring
(Imported)

Mid-USA

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,3/4"Offset

MID-79907

$294.25

In Stock

Shipping calculated at checkout.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,45T,1-5/8"Wide,3/4"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete pulley kit. 45 tooth, 1 5/8 wide 3/4 offset.

Mid-USA

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,47T,3"Wide,1/2"Offset

MID-79902

$294.25

In Stock

Shipping calculated at checkout.

Belt Drive Front Pulley Kit Fits Bdl St & Dyna Drives 8Mm,47T,3"Wide,1/2"Offset
These front pulley kits are for custom Softail style frames designed for wide rear tire application. Use of these kits will allow you to offset the transmission and 8mm primary belt drive to the left at the same time for the necessary rear drive to wide tire clearance. By moving the transmission and primary drive to the left together as one unit, it helps to keep the engine and Fits weight as close to the centerline of the frame as possible. The aluminum belt pulleys have a hard anodized finish for years of trouble free service and the removable steel inserts retain the full width spline to shaft contact for excellent power transfer. The 3 wide pulley kits are designed for 8mm open primary application and the 1 5/8 wide pulley kits are designed for 8mm closed primary application.Complete Pulley kit. 47 tooth, 3 wide 1/2 offset.

Mid-USA

Mainshaft Oil Seal Big Twin Late 84/Later* D.Lip Rpls Hd 12052A Cometic #C9260

MID-78907

$15.80

In Stock

Shipping calculated at checkout.

Mainshaft Oil Seal Big Twin Late 84/Later* D.Lip Rpls Hd 12052A Cometic #C9260
Cometic Gasket
Double Lip Mainshaft Oil Seal fits L, X 4 speed Late 1984/Later, Big Twin 5 speed Late 1984/Later, Softail 1989/Later & Dyna 1991/Later
Inner Primary Bearing Seal (Double Lip) fits Big Twin Late 1984/2005
Package of 5
Replaces HD# 12052A
Cometic # C9260

Mid-USA

Primary Cover Gasket,Outer BT 4 Spd 65/86,St 84/88 Rpls Hd 60540-65A

MID-78411

$23.80

In Stock

Shipping calculated at checkout.

Primary Cover Gasket,Outer Bt 4 Spd 65/86,St 84/88 Rpls Hd 60540-65A

Economically priced
High quality for sure scaling
Sold each

POWER HOUSE
oam Material Coated
Primary Cover Gasket
Fits Big Twin 4 speed 1965/1986 & Softail 1984/1988
Replaces HD# 60540-65A

Mid-USA

Primary Cover Gasket,Outer Flt,FXR Models 1994/2006 Rpls Hd 34901-94A

MID-78407

$11.70

In Stock

Shipping calculated at checkout.

Primary Cover Gasket,Outer Flt,Fxr Models 1994/2006 Rpls Hd 34901-94A

Economically priced
High quality for sure scaling
Sold each

POWER HOUSE
iber with Silicone Bead
Primary Cover Gasket
Fits FLT & FXR 1994/2006
Replaces HD# 34901-94A

Mid-USA

Chrome Bullet Hole Belt Guard Fits XL 04/Later* Rpls. Hd#60371-07

MID-78318

$79.20

In Stock

Shipping calculated at checkout.

Chrome Bullet Hole Belt Guard Fits XL 04/Later* Rpls. Hd#60371-07
V-FACTOR
Chrome Plated Guard
Fits Sportster models 2004/Later & Nightster
Replaces HD# 60371-07
(Imported)

Mid-USA

Outer Primary Cvr, Cast Black Softail 89/93, Dyna 91/93 Replaces Hd 60543-89

MID-78203

$214.50

In Stock

Shipping calculated at checkout.

Outer Primary Cvr, Cast Black Softail 89/93, Dyna 91/93 Replaces Hd 60543-89

Manufactured from die cast aluminum
See below for availability of finishes
On late models, partially drilled 9th hole must be completely drilled prior to installation
See the drive train section for primary cover mounting hardware, inspection & derby covers and gaskets

V-FACTOR
Matte Black Cover
Fits Softail 1989/1993 & Dyna 1991/1993
Note: Inside of cover has been pre-clearanced for most aftermarket primary belt drive kits
Replaces HD# 60543-89
(Imported)

Mid-USA

Rear Pulley Insert Drilled Cp BT 80/99 W/70T Pulley W/O Hrdw Eight Holes Rpls Hd 91733-85A

MID-78147

$28.15

In Stock

Shipping calculated at checkout.

Rear Pulley Insert Drilled Cp Bt 80/99 W/70T Pulley W/O Hrdw Eight Holes Rpls Hd 91733-85A

Stamped steel inserts cover your existing or OE pulley for a chrome plated look at a fraction of the cost of a chrome pulley

V-FACTOR
Chrome Plated Insert
Drilled Type, 70 Tooth Pulley Size
Fits Big Twin 1980/1999
No Hardware Included
Replaces HD# 91733-85
(Imported)

Mid-USA

Drive Belt,Rr Falcon Spc 139T 1" For Wide Tire & Custom Use Spc-139-1

MID-77598

$182.50

In Stock

Shipping calculated at checkout.

Drive Belt,Rr Falcon Spc 139T 1" For Wide Tire & Custom Use Spc-139-1

alcon is a carbon fiber-reinforced Goodyear Engineered Product
33% more tensile strength and engineered specifically for motorcycles
eatures a patented fabric-reinforced tooth surface that can increase horsepower and improve wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsalcon SPC
139 teeth, 1 wide
or custom wide tire use

Mid-USA

Drive Belt,Rr Falcon Spc 136T 1-1/8" For Wide Tire & Custom Use Spc-136-118

MID-77593

$219.75

In Stock

Shipping calculated at checkout.

Drive Belt,Rr Falcon Spc 136T 1-1/8" For Wide Tire & Custom Use Spc-136-118

alcon is a carbon fiber-reinforced Goodyear Engineered Product
33% more tensile strength and engineered specifically for motorcycles
eatures a patented fabric-reinforced tooth surface that can increase horsepower and improve wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsGates
136 teeth, 1 ¹/₈ wide
or custom wide tire use

Mid-USA

Drive Belt,Rr Falcon Spc 133T Dyna 2000/2006 1-1/8"Wide Hd 40015-00 Spc-133-118

MID-77585

$219.75

In Stock

Shipping calculated at checkout.

Drive Belt,Rr Falcon Spc 133T Dyna 2000/2006 1-1/8"Wide Hd 40015-00 Spc-133-118

alcon is a carbon fiber-reinforced Goodyear Engineered Product
33% more tensile strength and engineered specifically for motorcycles
eatures a patented fabric-reinforced tooth surface that can increase horsepower and improve wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsalcon SPC
133 teeth, 1 ¹/₈ wide
Fits Dyna 2000/2006 & for custom wide tire use
Replaces HD# 40015-00

Mid-USA

Rr Dr Belt Panther 139T 1-1/2" All Flt Models 1997/2003 Replaces Hd 40024-97 Pa139-U

MID-77563

$228.10

In Stock

Shipping calculated at checkout.

Rr Dr Belt Panther 139T 1-1/2" All Flt Models 1997/2003 Replaces Hd 40024-97 Pa139-U

Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
139 teeth, 1 ¹/₂ wide
Fits FLT 1997/2003
Replaces HD# 40024-97

Mid-USA

Drive Belt,Rear Panther 128T Spt 91/03 128 Tooth X 1-1/8" Rpls Hd 40022-91 Pa-128-118-U

MID-77509

$201.10

In Stock

Shipping calculated at checkout.

Drive Belt,Rear Panther 128T Spt 91/03 128 Tooth X 1-1/8" Rpls Hd 40022-91 Pa-128-118-U

Panther brand with ultra-cord by Dayco features a non-aramid tensile member that can withstand up to 20% higher horsepower loads than previous belts
The parabolic tooth profile (grooved) prevents air entrapment resulting in a quieter drive
A graphite loaded, self-lubricating nylon fabric facing provides a low coefficient and wear resistance

Note: To determine belt length with different pulley combinations or custom frames, see the helpful hint under the rear belt section in the drive train section

Note: Due to the numerous variables of misalignment and improper tensioning upon installation, there is no warranty on beltsPanther
128 teeth, 1 ¹/₈ wide
Fits Sportster 1991/2003 with 61T pulley & for custom wide tire use
Replaces HD# 40022-91

Best selling products

Brand

Collection

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

Brand

Collection

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

In Stock

Join the K and G Cycles family of friends